Resistex IURIS Installation Instructions

Safety Notes

• Never work when voltage is present on the luminaire.
• The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.
• Risk of electrostatic discharges (ESD Norm). Handle with precautions.
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

• Do not use chemicals or abrasives products to clean the fixture.
• Keep these instructions for dismantling or future maintenance.
• Additional information about RESISTEX luminaires can be consulted on the website www.resistex-sa.com.

RESISTEX cannot be responsible for any misuse of the product.

Mounting / Installation

The following steps detail the mounting process for the IURIS luminaire on a pole.

Step 1: Prepare the Luminaire

Attach the mounting bracket to the luminaire body using screws. Ensure all connections are secure.

Step 2: Connect the Luminaire

Connect the electrical wiring. The diagram shows wire connectors being used. Ensure proper polarity.

Step 3: Mount to Pole

Insert the luminaire arm into the pole mount. Secure the luminaire using the provided hardware. The diagram indicates using screws and nuts (X9).

Step 4: Final Assembly

The diagram shows the luminaire positioned on the pole, with a "PUSH" indication, suggesting a locking mechanism. It also shows ON/OFF switches.

Step 5: Securing the Luminaire

The diagram illustrates securing the luminaire to the pole with bolts and nuts (X2).

Step 6: Pole Mounting Detail

The diagram shows the luminaire attached to a pole, with a "PUSH" button and ON/OFF switches.

Note: The installation process involves several steps requiring specific hardware (indicated by X2, X4, X9). Refer to the diagrams for precise placement and connections.