Edishine Vanity Light

Important Safety Information

Please pay attention to the warning signs. Read the instructions with caution before operating and keep it properly.

Warning: Risk of fire. Use minimum 75°C supply conductors. Consult a qualified electrician to ensure correct installation. Before installation, please turn off the main power of the circuit breaker to prevent possible electric shock.

Installation Instructions

Step 1: Power Off

Turn the wall switch to the "OFF" position.

Depending on your home's fuse box type:

• Either turn the main (Master) switch to the "OFF" position to cut off the power supply of the entire home, or turn off the individual switch that supplies power to where the fixture will be installed.
• Alternatively, turn the main (Master) switch to the "OFF" position to cut off the power supply of the entire home, or unscrew the fuse that supplies power to where the fixture will be installed.

Visual Aid Descriptions:

FIG.1 WALL SWITCH: A diagram showing a hand turning a standard wall light switch to the "OFF" position.

FIG.2 BREAKER PANEL: A diagram illustrating a hand flipping a circuit breaker switch within an electrical panel to the "OFF" position.

FIG.3 FUSE BOX: A diagram depicting a hand unscrewing a fuse from a fuse box to disconnect power.

Step 2: Prepare and Mount

Take out all the parts from the package and place them on a clean surface.

Unscrew decorative nuts and fixture screws. Use outlet box screws to connect the mounting bar to the outlet box.

Step 3: Wiring

Use wire connectors to connect the wires:

• Connect the BLACK WIRE of the FIXTURE to the BLACK WIRE of the OUTLET BOX.
• Connect the WHITE WIRE of the FIXTURE to the WHITE WIRE of the OUTLET BOX using CONNECTORS.
• Connect the GROUND WIRE of the FIXTURE to the GROUND WIRE of the OUTLET BOX, using the GREEN GROUND SCREW to connect to the MOUNTING BAR.

Carefully tuck the wires back into the OUTLET BOX.

Step 4: Final Assembly

Use fixture screws to install the FIXTURE onto the MOUNTING BAR and secure it with decorative nuts.

Use the SOCKET RING to attach the GLASS SHADE to the FIXTURE.

Install the bulbs.

Diagram Description for Wiring and Assembly:

The diagram illustrates the process of attaching the lighting fixture to an electrical outlet box. It shows an outlet box (not included) with wires (black live wire, white neutral wire, ground wire) extending from it. A mounting bar is secured to the outlet box using outlet box screws. The fixture, which consists of a main bar supporting three cylindrical lamp holders, is then attached to the mounting bar using fixture screws and decorative nuts. Wire connectors are used to join the corresponding wires from the fixture to the outlet box wires. The fixture's ground wire is connected to the mounting bar via a green ground screw. Carefully tuck the wires back into the outlet box. Finally, glass shades are attached to the lamp holders using socket rings, and a bulb is shown being inserted into a socket.

Specifications

• Input Voltage: 120VAC 60Hz
• Max. Load Power: Incandescent Bulb 60W x 3
• Socket Type: Standard Medium E26

One Year Limited Warranty

Supported by our professional R&D team and QC team, Edishine provides a One Year Warranty for materials and workmanship from the purchase date. Please note that the warranty does not cover damage caused by personal misuse or improper installation.

To ensure our dedicated customer service team can assist you better, please attach your Order ID and Name when contacting Edishine.

Product Information

Made in China.

Recycling Information: The product packaging or components may be recyclable. [Recycling symbol] Please dispose of responsibly.