Colour Changing Soothing Sounds Machine

Product Overview

Dimensions: (Height) 5.3 x (Width) 9 x (Length) 9cm

This is a SOOTHING SOUNDS MACHINE featuring 34 soothing sounds and 9 COLOUR CHANGING NIGHT LIGHT OPTIONS.

Features:

• USB Operated
• Brightness and Colour can be adjusted in 3 levels
• 32 volume levels
• 5 levels of timing function: 15, 30, 60, 90, 120 minutes, or continuous use (max 10 hours)
• Power Off function
• Memory Function (records last used settings)

Technical Details:

• Operating Voltage: 3.7V Dynamic
• Current: Light off <200mA, Light on <400mA
• Quiescent Current: 20uA
• Speaker: Φ40mm 4 Ω 3 W
• Power supply: Input DC 5V/1A
• Accessories: 1x USB Charging cable

Parts Identification

The device has the following parts:

• [On/Off Button]
• [Power Indicator Light]
• [Previous Sound Button]
• [Next Sound Button]
• [Volume Up Button]
• [Volume Down Button]
• [Timer Indicator Light]
• [RGB Light / Timer Button]
• [Night Light/Brightness Switch]
• [Type-C Power Port]
• [Light Icon]

A diagram shows the top and side views of the device with these parts numbered.

Instruction Manual

Soothing Sounds List:

1. Wind
2. Rainshed
3. Light Rain
4. Moderate Rain
5. Thunderstorm
6. Wave
7. Stream
8. Bird
9. Cricket
10. Frog
11. Fireplace
12. Campfire
13. Foetal Monitoring
14. Shush
15. Wall fan
16. Fan
17. Floor Fan
18. Coffee Shop
19. Handbell
20. Wind Chime
21. Steamship
22. Aircraft
23. Train
24. White Noise
25. Pink noise
26. Brown Noise
27. Clock
28. Buddha
29. Lullaby
30. Music Box
31. Trinkle Star
32. Moring
33. Fantasy
34. Cheerful

Basic Operation:

1. Power On: Long press the [On/Off Button] (1) for 3-5 seconds.
2. Play and Switch Sound:
   • In the default power-on state, the Power light (2) will be on.
   • To pause sound: Long press the [On/Off Button] (1).
   • To choose previous or next sounds: Press the [Previous Sound Button] (3) or [Next Sound Button] (4).
   • To resume playing when paused: Press any button.

Lighting Function

• Turn On/Off Light: Short press the [Light Icon] (11).
• Light Brightness Control: Long press the [Light Icon] (11) for 2-4 seconds to adjust brightness.
• Light Colour Control: Short press the [RGB Light / Timer Button] (8) to cycle through the following colours:
  1. Night light
  2. Red
  3. Green
  4. Blue
  5. Yellow
  6. Light blue
  7. Purple
  8. Changing Mode 1 (colourful)
  9. Changing Mode 2 (colourful)

Timer Function

When no timer is set, the light plays in an infinite loop.

Long press the [RGB Light / Timer Button] (8) to set the timer function. The corresponding indicator light (7) will illuminate to show the set time. The machine will turn off automatically when the timer expires.

• LED 1 on: 30 minutes countdown
• LED 2 on: 60 minutes countdown
• LED 3 on: 90 minutes countdown

Volume Control

There are 32 volume levels. Press the [Volume Up Button] (+) or [Volume Down Button] (-) to increase or decrease the volume while sound is playing. Long press the [Volume Up Button] (+) or [Volume Down Button] (-) to rapidly increase or decrease the volume.

Power Off

When the machine is on, long press the [On/Off Button] (1) for 3-5 seconds to turn it off.

Battery Charge

Use the provided Type-C cable to connect a power adapter (not included) to the [Type-C Power Port] (10) to charge the lithium battery.

Power Indicator Status

• Single blue light: Normal startup state (non-charging).
• Single blue light flashing: Low battery (non-charging).
• Single red light: Battery charging (light is off while charging).
• Single green light: On standby / full battery (light is off when fully charged).
• Blue/red light simultaneously on: Normal on and charging status.
• Blue/green light simultaneously on: Normal standby status and fully charged.

Memory Function

The device records the last used status, including volume level, sound type, light colour, and turn-off time. This last setting will be played by default upon next use.

FAQs (Frequently Asked Questions)

1. There is no sound after the power is switched on.

   Please check if the battery is too low (indicated by the power light flashing blue or being off). Connect the device to power and try again.

2. Cannot charge.

   Please connect the power supply. Check whether the indicator light is working. Refer to the "Power Indicator Status" section for details.

3. Cannot play sound.

   Troubleshooting plan: Check if the power light (2) is on blue. If there is no blue light on, please press and hold the power switch button for 3 seconds to restart the machine.

When the battery power is lower than 3.3V, the blue light of the machine status light will flash, and the sound will be played and the light will be on at the same time. This flashing light when the battery is low is a normal phenomenon. Plug in the charger and charge timely to prevent reoccurrence.

Precautions

• No user serviceable parts inside.
• Keep dry.
• Keep away from heat.

Cleaning and Maintenance

• Wipe the surface with a soft wet towel. Do not wipe or clean the product with corrosive detergents.

Power Connection

Insert the USB receiver into the energizing port and plug the other end into the power port. This product is suitable for general USB interface lines, which can be connected to mobile power supply, computer, ordinary and vehicle-mounted power supply, etc.

Disposal

• Coopers of Stortford uses recyclable or recycled packaging where possible.
• Please dispose of all packaging, paper, cartons, and packaging in accordance with your local recycling regulations.
• Plastics, polybags – Contains the following recyclable plastic.

At the end of the product's lifespan, please check with your local council authorised household waste recycling centre for disposal. [Recycling Symbol ♻️] [UKCA Logo] [CE Logo]