Health Test Report
Report No.: AGC00550220602EH02
General Information
| Applicant | Shenzhen Hairuichuang Technology Co., Ltd. |
|---|---|
| Manufacturer | Shenzhen Hairuichuang Technology Co., Ltd. |
| Factory | Shenzhen Hairuichuang Technology Co., Ltd. |
| Address | Room 2001, Building A, Weidonglong Business Building, No. 2125, Meilong Avenue, Longhua District, Shenzhen, China |
| Product Designation | smartwatch |
| Brand Name | Blackview, IOWODO, FeipuQu |
| Test Model | W10 |
| Series Model | W10Pro, W20, W20Pro, W30, W30Pro, W40, W40Pro, W50, W50Pro, W60, W60Pro, W70, W70Pro, W80, W80Pro, W90, W90Pro, R8Pro |
| Difference Description | All the same except for the model name. |
| Date of Receipt of Test Item | Sep. 15, 2022 |
| Date of Test | Sep. 15, 2022 to Oct. 13, 2022 |
| Test Result | Pass |
Attestation of Global Compliance (Shenzhen) Co., Ltd. conducted testing for compliance with the requirements set forth in the European Standard EN 62479:2010. The results of testing in this report apply only to the product/system which was tested.
Prepared By: Thea Huang (Project Engineer) - Oct. 13, 2022
Reviewed By: Calvin Liu (Reviewer) - Oct. 13, 2022
Approved By: Max Zhang (Authorized Officer) - Oct. 13, 2022
Technical Information
| Product Designation | smartwatch |
|---|---|
| Brand Name | Blackview, IOWODO, FeipuQu |
| Test Model | RH281-V03 |
| Hardware Version | V03 |
| Software Version | V1.0 |
| Operating Frequency | 2.402 GHz to 2.480GHz |
| Bluetooth Version | V 5.2 |
| Modulation Type | BR: GFSK_1Mbps ; EDR: π/4-DQPSK_2Mbps, 8DPSK_3Mbps BLE: [x] GFSK 1Mbps [ ] GFSK 2Mbps |
| Antenna Type | [x] FPC Antenna (Temporary RF connector provided by manufacturer) [ ] Dedicated Antenna |
| Antenna Gain | 0.05dBi |
| Power Supply | DC 3.8V by battery or DC 5V by adapter |
Note: For more details, please refer to the user's manual of the EUT.
Test Result
The maximum output power of Bluetooth (BR&EDR) is 4.72dBm (2.96mW), which is less than 20mW. This result is detailed in ETSI EN 300 328 (V2.2.2) Test report (AGC00550220602EE04) and is deemed to comply with the basic restrictions without testing.
The maximum output power of Bluetooth (BLE) is 4.11dBm (2.58mW), which is less than 20mW. This result is detailed in ETSI EN 300 328 (V2.2.2) Test report (AGC00550220602EE11) and is deemed to comply with the basic restrictions without testing.
Conclusion
Remark: EUT meets the basic requirements in the standard.
Conditions of Issuance of Test Reports
All samples and goods are accepted by Attestation of Global Compliance (Shenzhen) Co., Ltd. (the "Company") solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients").
Any report issued by Company as a result of this application for testing services (the "Report") shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified copy thereof prepared by the Company to its customer, supplier or other persons directly concerned. The Company will not, without the consent of the Clients, enter into any discussion or correspondence with any third party concerning the contents of the Report, unless required by the relevant governmental authorities, laws or court orders.
The Company shall not be called or be liable to be called to give evidence or testimony on the Report in a court of law without its prior written consent, unless required by the relevant governmental authorities, laws or court orders.
In the event of the improper use of the report as determined by the Company, the Company reserves the right to withdraw it, and to adopt any other additional remedies which may be appropriate.
Samples submitted for testing are accepted on the understanding that the Report issued cannot form the basis of, or be the instrument for, any legal action against the Company.
The Company will not be liable for or accept responsibility for any loss or damage however arising from the use of information contained in any of its Reports or in any communication whatsoever about its said tests or investigations.
Clients wishing to use the Report in court proceedings or arbitration shall inform the Company to that effect prior to submitting the sample for testing.
The Company is not responsible for recalling the electronic version of the original report when any revision is made to them. The Client assumes the responsibility to providing the revised version to any interested party who uses them.
Subject to the variable length of retention time for test data and report stored hereinto as otherwise specifically required by individual accreditation authorities, the Company will only keep the supporting test data and information of the test report for a period of six years. The data and information will be disposed of after the aforementioned retention period has elapsed. Under no circumstances shall we provide any data and information which has been disposed of after retention period. Under no circumstances shall we be liable for damage of any kind, including (but not limited to) compensatory damages, lost profits, lost data, or any form of special, incidental, indirect, consequential or punitive damages of any kind, whether based on breach of contract of warranty, tort (including negligence), product liability or otherwise, even if we are informed in advance of the possibility of such damages.
Attestation of Global Compliance (Shenzhen)Co., Ltd
Attestation of Global Compliance (Shenzhen)Std & Tech Co., Ltd
Tel: +86-755 2523 4088 | E-mail: agc@agccert.com | Web: http://www.agccert.com/
Any report having not been signed by authorized approver, or having been altered without authorization, or having not been stamped by the "Dedicated Testing/Inspection Stamp" is deemed to be invalid. Copying or excerpting portion of, or altering the content of the report is not permitted without the written authorization of AGC. The test results presented in the report apply only to the tested sample. Any objections to report issued by AGC should be submitted to AGC within 15days after the issuance of the test report. Further enquiry of validity or verification of the test report should be addressed to AGC by agc01@agccert.com.
