OTL TWS EarPods User Guide

Contents

• Safety Instructions
• Product Overview
• First Time Use / Pair to New Device
• Pair with Bluetooth Devices
• Use with Other Devices
• Power On/Off
• Charging
• Changing Ear Tips
• Operation (Play/Pause, Skip Track, Voice Assistant, Call Handling)
• Troubleshoot
• Warning
• Information on Disposal

Safety Instructions

Read all instructions carefully before use and keep them for future reference.

• Do not immerse in water.
• Unsuitable for children under 3 years due to small parts that may cause choking.
• Children aged 3-7 should be supervised by an adult during use; prolonged use is not advised.
• The device may become warm while charging.
• Set volume to low before turning on sound.
• Long-term exposure to loud noise may cause damage to eardrums or loss of hearing.

Product Overview

Diagram of an earbud showing the LED indicator, the Multi-Function Button (MFB), and the microphone.

Earbud Components:

• LED: Indicator light.
• MFB (Multi Function Button): Touch-sensitive area for controls.
• Microphone: For voice input.

Diagram of a charging case showing the charging port.

Charging Case Component:

• Charging Port: Connects to the charging cable.

First Time Use / Pair to New Device

Illustration shows a smartphone and a pair of earbuds, symbolizing the setup process.

To activate the earbuds for the first time, take both earbuds out of the charging case and then place them back inside. It is recommended to charge your earbuds before their initial use.

Pair with Bluetooth Devices

A screenshot of a smartphone displaying Bluetooth settings, showing 'Bluetooth ON' and 'OTL TWS EARPODS' in the device list.

1. Turn on the Bluetooth function in your device's settings.
2. Take both earbuds out of the charging case. The LED indicator on one earbud will flash, indicating it is in pairing mode and searching for nearby Bluetooth-enabled devices.
3. On your device's Bluetooth list, select "OTL TWS EARPODS" to establish pairing.
4. When pairing is successful, the LED on both earbuds will flash BLUE.

Use with Other Devices

To play audio from a different Bluetooth device, first disconnect the earbuds from the original device. Then, follow steps 1-4 from the "Pair with Bluetooth Devices" section to re-pair them with the new device.

Power On/Off

Power On

Take both earbuds out of the charging case. They will automatically power on if the charging case is charged.

Power Off

Place both earbuds back into the charging case. They will automatically power off.

Charging

Charging the EarPods

Insert the earbuds into the charging case. The LED light will be solid RED while charging. The LED will turn off once the earbuds are fully charged.

Charging the Case

Charge the charging case before first use using the provided Type-C cable. The LED indicator will flash during charging and turn solid once fully charged. If the battery is low, only the left LED indicator light will flash.

Changing Ear Tips

Illustrations show how to remove an ear tip by pulling from the base and attach a new tip by pushing it onto the connector until it clicks.

To remove an ear tip, pull firmly with your fingers at the base of the ear tip. To attach an ear tip, align it with the connector and push it on until it clicks into place. Different tip sizes may be included in the box.

Operation

Play/Pause

Diagram of an earbud with a touch area highlighted, indicating a double-tap action for play/pause.

When listening to music, touch the right or left earpod twice to play or pause.

Skip Track Forward/Backward

Diagram of an earbud with a touch area highlighted, indicating a 2-second press for track skipping.

While listening to music, press and hold the right earpod for 2 seconds to skip to the next track. Press and hold the left earpod for 2 seconds to go to the previous track.

Voice Assistant

Diagram of an earbud with a touch area highlighted, indicating a triple-tap action for voice assistant activation.

Touch the right or left earpod three times to activate the voice assistant (e.g., Siri or Google Assistant).

Answer Call / Hang Up Call

Diagram of an earbud with a touch area highlighted, indicating a double-tap action for call handling.

Touch the right or left earpod twice to answer an incoming call. Touch twice again to hang up.

Reject Call

Diagram of an earbud with a touch area highlighted, indicating a 2-second press on the MF button to reject a call.

Press and hold the MF button on the right or left earpod for 2 seconds to reject an incoming call.

Troubleshoot

If you encounter an error with the earbuds, follow these steps:

1. Take one earbud out of the charging case.
2. The LED light will flash BLUE and RED quickly. Press the MF area for 6 seconds. The RED LED light will go off after 1 second.
3. Put the earbud back into the charging case.
4. Take the other earbud out of the case and repeat steps 1-3.
5. Take both earbuds out of the charging case. Search for "OTL TWS EARPODS" from your Bluetooth-enabled device. One earbud will flash RED and BLUE alternatively during this process.
6. If the earbuds' power is low, the Bluetooth range may be affected. Charge the earbuds to avoid disruption during use.

For general troubleshooting instructions, please visit www.otltechnologies.com.

Warning

• This product is not a toy.
• Do not disassemble, repair, or modify the headphones.
• Keep the headphones dry and do not store them in damp areas to avoid damage.
• Avoid dropping the headphones, as it may cause damage to the product.
• Do not insert the jack plug into electric sockets.

Information on Disposal for Users of Waste Electrical & Electronic Equipment (Private Household)

The symbol on the products or accompanying documents indicates that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery, and recycling, please take these products to designated collection points, where they will be accepted free of charge. Alternatively, in some countries, you may return your products to your local retailer upon purchasing an equivalent new product. Disposing of this product correctly helps save valuable resources and prevent potential negative effects on human health and the environment. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.