Elite™ Android Quick Start Guide for Zello

Initial Setup and Configuration

1. Before plugging your Elite™ speaker-microphone (SM) into the Android device, set the configuration to 3 by pressing the rear button for 4 seconds. The SM will then beep twice in quick succession.
2. The SM will beep and flash a red LED a number of times equal to the current configuration.
   • If the SM indicates configuration 3, no further action is needed. After 4 seconds, the SM will beep twice in quick succession, indicating it is ready for use.
   • If the SM indicates a configuration other than 3, press the rear button 3 times. The SM will then beep and flash the LED 3 times as confirmation. After 4 seconds, the SM will beep twice in quick succession, indicating it is ready for use.
3. Plug the SM into the device. Launch Zello and tap the 3 dots in the upper-right corner, then select Options.
4. Navigate to Push-to-talk buttons > PTT Headset. Choose PTT Headset and enable 'Handle button in the background when possible'.
   Note for Zello For Work Users: This may need to be configured in the administration portal.
5. Disable Google Assistant as it can interfere with Zello and wired accessories. In the Settings app, navigate to Google > All Services > Search, Assistant & Voice > Google Assistant > General, and disable the Google Assistant toggle.
6. Navigate back to the previous menu and select Devices. Select Wired headphones and disable 'Get Help From Google'.
   Note: This setting may only appear after the SM has been connected for the first time.

About Stone Mountain

Designed, Assembled, Tested and Supported with Pride in the USA. At Stone Mountain, we strive to provide our customers with innovative products of the highest quality, reliability, and value. We welcome and appreciate your input.

Stone Mountain, Ltd.
1597 Eagle Point Road
Huddleston, VA 24104

Customer Support: 540.297.6434
www.stonemountainltd.com