Akko ACRYLIC64 User Manual
System Commands
Note: The following features are realized by the combination of "Fn" + corresponding key
| Key Combination | Function | Key Combination | Function | Key Combination | Function |
|---|---|---|---|---|---|
| Esc | ~ | F11 | Increase Volume | Left Win | Lock Win |
| 1 | F1 | + | F12 | Backspace | Del |
| 2 | F2 | Y | PgUp | W | Swap WASD with ↑↓←→ |
| 3 | F3 | H | PgDn | ||
| 4 | F4 | U | Home | ||
| 5 | F5 | J | End | ||
| 6 | F6 | | | Insert | ||
| 7 | F7 | P | PrtSc | ||
| 8 | F8 | C | Calculator | ||
| 9 | F9 | M | Mute | ||
| 0 | F10 | < | Decrease Volume |
Restore Factory Settings
Press and hold the Fn + Backspace keys together for 5 seconds.
Backlight Settings
Note: The following features are realized by the combination of "Fn" + corresponding key
| Key Combination | Function |
|---|---|
| \ | Light Effects Switch |
| L | Light On / Off |
| ; | Slower Animation |
| ` | Faster Animation |
| Z | Acrylic Case Light Brightness Change (4-level Cyclic Switch) |
| X | Acrylic Case Light Animation Speed Change (4-level Cyclic Switch) |
| Left Ctrl | Acrylic Case Light Effect Change (including the option to turn off side light completely) |
| ↑ | Bright |
| ↓ | Dim |
| ← | Change Animation Direction |
| → | Change Color |
| Spacebar | Single-color light palette. Users can select a color and both the front and side lights will switch correspondingly. |
Akko Macro V1.0
Macro Setup Instruction 1
Akko Macro V1.0 is hardware-based and works without software drivers.
The following keys cannot be programmed: "Esc", "Fn", "Left Win" and "Right Win".
Akko Macro V1.0 does not support simultaneous trigger, meaning pressing "AB" at the same time will trigger the keys in the order of A followed by B.
Akko Macro V1.0 does not support customized interval time; the trigger interval between key A and key B cannot be defined and will follow the system's default trigger time.
Macro Setup Instruction 2
Macro Setup Process:
1. Enter Macro Mode: Long Press Fn + Left Win
[arrow]
2. Start Macro Editor: Fn + Esc
[arrow]
3. Select Custom Key: Fn + Custom Key (e.g., Fn + A)
[arrow]
4. Macro Recording: Press Keys to Store
[arrow]
5. End Recording: Fn + Custom Key (e.g., Fn + A)
[arrow]
6. Record Next Key (Optional)
[arrow]
7. Exit Macro Editor: Fn + Esc
[arrow]
8. Exit Macro Mode: Back to Default Mode (Long Press Fn + Left Win for 3 seconds)
Clear Macro:
If a key has been defined, after entering the Macro editor, you can press "FN + the key" to clear its definition.
If you want to re-customize that key, press "FN + the key" again to start the new Macro recording after clearing its old definition.
Macro Setup Instruction 3
Macro Recording Example: Define "A" as "AKKOGEAR"
- Press Fn + Left Win for 3 seconds to enter the Macro mode.
- Press Fn + ESC to launch the Macro editor.
- Press Fn + A. This selects key "A" for recording.
- Press A, K, K, O, G, E, A, R in order as the replacement definition for "A".
- Press Fn + A again to end the Macro recording for key "A".
At this point, pressing "A" in a text editor will display "AKKOGEAR".
If you want to create a Macro for key "B", press Fn + B to start the Macro recording.
- Press Fn + Esc to exit the Macro editor.
Under the Macro mode, you can configure the keys and Macros you have set.
- Press and hold Fn + Left Win for 3 seconds to exit the Macro mode and return to the default key definition.
Calling Macros
Method A:
Enter the Macro mode by long pressing Fn + Left Win. All keys will switch to their pre-configured definitions with the Win key locked. Press Fn + Win to unlock the Win key if necessary. In Macro mode, you can use keys with customized definitions. Note: Every time you reboot or re-plug the keyboard cable, the Macro mode will be turned off by default, and all keys will return to default definitions until you re-enter the Macro mode.
Method B:
Under the default key definition, you can also quickly call the customized content of specific keys through "Fn + Right Alt + the key that has been defined through Macro". Note that you must first press Fn and then press Alt to call the Macro.
Akko Warranty and Service Statement
- Akko provides a 1-year warranty for customers in mainland China. For other regions, please contact your seller (Akko distributor) for specific warranty policy.
- If the warranty window expires, customers need to pay for repairs. Akko will also provide instructions if users prefer to repair the keyboard by themselves. However, users shall take full responsibility for any loss incurred during self-repair.
- Disassembling the keyboard without manufacturer/seller's instruction will immediately void the warranty.
- The return and warranty policy may vary on different platforms and are subject to the specific distributor at the time of purchase.
Precautions: Man-made damage is not limited to immersion, falling off, and pulling off the wires with excessive forces, etc. The keyboard is an electronic product; please handle it with care according to electronic product protection methods.
After-sales Service Phone: 0755-27728007
After-sales Service QQ: 981572876
* Official after-sales service hours are Monday to Friday, 10:00 AM to 6:00 PM. Holidays follow national statutory holidays.
* Due to uncontrollable factors such as repair time, logistics time, and parts procurement time, after-sales time may vary. It will be assessed based on the actual damage situation. Please wait patiently.
Connect with Akko
Website: www.akkogear.com
[WeChat icon] Follow us on WeChat
[Weibo icon] Follow us on Weibo
[Instagram icon] instagram.com/akkogear
[Facebook icon] facebook.com/akkogear
