Epson EB-L200SW / EB-L200SX Multimedia Projector
Quick Start Guide
Introduction
This guide provides essential steps for setting up and operating your Epson EB-L200SW or EB-L200SX multimedia projector.
What's in the Box
The package typically includes:
- The projector unit
- Remote control and batteries
- Power cord
- Computer cable (e.g., HDMI, VGA)
- User manual/documentation CD-ROM
- Lens cap/protective cover
Diagram Description: The first page shows the projector, a remote control with batteries being inserted, a power cord, a computer cable, and a screen.
Connecting Your Projector
Follow these steps to connect your projector to various devices:
Step 1: Prepare the Projector
Diagram Description: An illustration shows attaching a protective cover or lens cap to the projector.
Step 2: Connect Devices
Diagram Description: The second page illustrates connecting a computer via HDMI cable to the projector's HDMI port, and connecting the projector to a power outlet. The third page shows a detailed view of projector ports. Connections include: USB Type-A port, Computer 1 and Computer 2 ports (for VGA or other computer signals), HDMI 1 and HDMI 2 ports (for digital video and audio), Composite video input, Audio inputs (Audio 1, Audio 2) and output, RS-232C for control, and Monitor Out for passing through video signal. Cables shown are USB cable, Computer cable, HDMI cable, and Composite cable.
Step 3: Power On
Diagram Description: The fourth page shows the power button on the projector being pressed, indicated by a power symbol [power-symbol]. The fifth page shows the projector screen displaying 'ON' and a signal source selection menu.
Basic Operation
Using the Remote Control
The remote control features buttons for:
- Power [power-symbol]
- Source selection (HDMI, Computer, USB, LAN) [source-symbol]
- Menu navigation (Menu, H/V, Esc, directional buttons, Enter/OK) [menu-symbol]
- Zoom (E-Zoom) [zoom-symbol]
- Volume control [volume-symbol]
- Aspect ratio adjustment [aspect-symbol]
- A/V Mute [mute-symbol]
- Split screen [split-symbol]
- Freeze image [freeze-symbol]
- Home screen [home-symbol]
Diagram Description: The sixth page shows the remote control layout with various buttons labeled and connected to example screen outputs.
Adjusting the Image
The projector allows for image adjustments such as:
- Focus and zoom using the lens or remote.
- Keystone correction (Vertical and Horizontal) to fix trapezoidal distortion. This is accessed via the Menu, H/V buttons, and adjusted using the directional buttons. The screen displays 'V-Keystone' and 'H-Keystone' with numerical values.
- Image scaling and positioning adjustments are also available.
Diagram Description: The fifth and sixth pages illustrate image adjustment processes, including focus, zoom, and keystone correction using the remote control and on-screen menus.
For More Information
For detailed specifications, troubleshooting, and software updates, please visit the Epson support website at epson.sn.
Additional documentation may be available on the included CD-ROM [cd-rom-icon].
Diagram Description: The eighth page displays prohibition symbols indicating actions to avoid: using tools to open the projector [no-tools-symbol], blocking ventilation holes [no-vent-block-symbol], tilting the projector excessively [no-tilt-symbol], exposure to rain or moisture [no-water-symbol], using the projector in dusty environments [no-dust-symbol], placing the projector on unstable surfaces [no-unstable-surface-symbol], using the projector in direct sunlight [no-sunlight-symbol], using the projector in extremely hot or cold environments [no-temperature-symbol], and using the projector in humid environments [no-humidity-symbol].
Document copyright: © 2020 Seiko Epson Corporation.
Product identifier: *414022000*
