Motorcycle Intelligent Navigation System

1. Connecting Your Smartphone: CarPlay & Android Auto

This system supports both Apple CarPlay and Android Auto for seamless smartphone integration.

1.1 Apple CarPlay Setup

Follow these steps to connect your iPhone:

1. Tap the ? CarPlay icon on the navigation screen to launch the application.
2. Ensure your iPhone's WLAN (Wi-Fi) ? and Bluetooth ? are enabled.
3. On your iPhone, search for the Bluetooth device named "F601_XXXXXXxx" (Note: "F601_XXXXXXxx" is a placeholder; your device name may vary).
4. Pair your iPhone with the navigation system and allow synchronization.
5. Confirm the connection by tapping "Use CarPlay" on your iPhone.

Upon successful connection, you can access navigation, music, phone calls, and other CarPlay-enabled apps.

1.2 Android Auto Setup

Follow these steps to connect your Android device:

1. Tap the ? Android Auto icon on the navigation screen to launch the application.
2. Ensure your Android phone's Wi-Fi ? and Bluetooth ? are enabled.
3. On your Android phone, search for the Bluetooth device named "F601_XXXXXXxx" (Note: "F601_XXXXXXxx" is a placeholder; your device name may vary).
4. Pair your phone with the navigation system and allow synchronization. Wait for the connection to be established.

Upon successful connection, you can access phone calls, navigation, music, and other Android Auto-enabled apps.

2. Tire Pressure Monitoring System

This system allows you to monitor your motorcycle's tire pressure for enhanced safety.

Installation and Setup:

1. Access the Tire Pressure application on the navigation unit and tap "Match".
2. Proceed with installing the corresponding tire pressure sensor.

Easy Installation in 3 Steps:

1. Remove the existing valve cap from your tire.
2. On the tire pressure interface, tap "Pair", then install the tire pressure sensor onto the tire's valve stem.
3. Verify air tightness to ensure a secure and leak-free installation.

Visual Aid Description: An illustration shows a motorcycle wheel with a tire pressure sensor installed on the valve stem. Icons labeled "A", "F.W", "B", "R.W" are depicted, likely indicating sensor assignment or tire location (e.g., Front Wheel, Back Wheel).

3. Wiring Instructions

Proper wiring is crucial for the system's operation.

Connections:

• Black Wire (GND): Connect this wire to the negative terminal (-) of your motorcycle's battery.
• Red Wire (ACC): Splice this wire into your motorcycle's existing ACC (Accessory) power line.

Wiring Diagram Description: A schematic shows a 12V DC battery with clearly marked positive (+) and negative (-) terminals. The black wire is connected to the negative terminal. The red wire is depicted connecting to an ACC power source, typically activated when the ignition is on.

Important Precautions

Please read and strictly follow these precautions to ensure safe operation and prevent damage:

1. Read All Instructions: Familiarize yourself with all operating instructions before use.
2. Keep Manual: Retain this manual for future reference.
3. Adhere to Warnings: Comply with all warnings and instructions provided.
4. Use Approved Accessories: Only use accessories recommended by the manufacturer.
5. Do Not Modify: Never attempt to dismantle, modify, or alter the product or its power cord. This can lead to hazards like fire or electric shock.
6. Prevent Foreign Objects: Keep the device free from metal objects, tools, or flammable materials to avoid overheating, fire, or electrical faults.
7. Handle Malfunctions: If you notice smoke, unusual odors, or any abnormality, immediately stop use, power off the device, and contact your dealer.
8. Avoid Heat: Do not install or operate the device in direct sunlight or near heat sources.
9. Power Source: This device requires a 12V DC cathode-grounded battery system.
10. Professional Servicing: Do not attempt self-repairs. All maintenance should be performed by qualified personnel.
11. Safe Operation: Never operate the device while actively driving. Park your vehicle in a safe location before using the system.
12. Water Exposure: Protect the device and its components from excessive water, especially during car washes.
13. Cooling Down: If the vehicle has been parked in high temperatures (e.g., in the sun), allow the device to cool down before operation.