Euromaid Top Loader Washing Machine

Safety Instructions

For your safety, follow the information in this manual to minimize risks of fire, explosion, electric shock, property damage, personal injury, or loss of life.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a person responsible for their safety.
• Children should be supervised to ensure they do not play with the appliance.
• Use only the new hose-sets supplied. Old hose-sets should not be reused.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• Openings must not be obstructed by carpet.
• This appliance is intended for household and similar applications (staff kitchen areas, farm houses, hotels, motels, bed and breakfast, communal areas in flats/laundrettes).

Explanation of the Symbols

Warning! ⚠️ This symbol and signal word indicate a potentially dangerous situation that may result in death or serious injury if not avoided.

Caution! ⚠️ This symbol and signal word indicate a potentially dangerous situation that may result in slight or minor injuries or damage to property and the environment.

Note! ? This symbol and signal word indicate a potentially dangerous situation that may result in slight or minor injuries.

Potential Electric Shock

• For indoor use only.
• Do not place in humid places.
• Do not insert hands into the running spin-dry tub. If the tub does not stop within 15 seconds after opening the cover, stop use and have it repaired.
• Unplug the appliance from the mains before any maintenance.
• Always unplug the machine and turn off the water supply after use. Max. inlet water pressure: 0.03MPa. Min. inlet water pressure: 0.8MPa.
• Ensure the power plug is inserted into an earthed three-pole socket.
• Water and electrical connections must be made by a qualified technician according to manufacturer instructions and local safety regulations.

Risk to Children!

• Keep children and pets away from the machine during operation as it may be very hot.

Risk of Explosion!

• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive substances (e.g., wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene). This may result in fire or explosion.

Installation Warning!

• For indoor use only.
• Not intended to be built-in.
• Openings must not be obstructed by carpet.
• Do not install in bathrooms or very wet rooms, or rooms with explosive or caustic gases.
• Remove all packages and transport bolts before use to avoid serious damage.
• Washing machines with single inlet valves can only connect to cold water supply. Double inlet valves require connection to both hot and cold water supply.
• The plug must be accessible after installation.

Risk of Damaging Appliances!

• Product is for home use only and designed for machine-washable textiles.
• Do not climb or sit on the top cover.
• Do not lean against the machine door.
• Cautions during Handling:
  • Transport bolts must be reinstalled by a specialized person.
  • Drain accumulated water from the machine.
  • Handle carefully; do not hold protruding parts while lifting. The door cannot be used as a handle during conveyance.
  • The appliance is heavy; transport with care.
  • Do not close the door with excessive force.
  • Do not wash carpets.

Packaging / Old Appliances

This marking ♻️ indicates that this product should not be disposed of with other household wastes throughout the EU. Recycle responsibly to promote sustainable reuse of material resources. To return your used device, use collection systems or contact the retailer.

Installation

Product Description

The washing machine consists of the following parts:

• Top Lid
• Frame
• Control Panel
• Cabinet
• Water Inlet Valve
• Power Cord and Plug
• Handle
• Adjustable Hose
• Drain Hose

Note: The product line chart is for reference only; refer to the actual product.

Accessories Included

The standard accessories include:

• Inlet hose
• Manual
• Screw
• Spring clamp
• Drain hose

Note: If the drain hose is already installed, the spring clamp and drain hose may not be included.

Installation Area

Warning!

• Ensure the machine is level to minimize vibration during operation.
• Ensure the power lead is not caught under the machine where it can be damaged.

Placement requirements:

1. On a rigid, dry, and level surface.
2. Out of direct sunlight.
3. Adequate ventilation.
4. Room temperature above 0°C.
5. Away from heating sources.

Unpacking the Washing Machine

Warning! Packaging material (e.g., Films, Styrofoam) can be dangerous for children and poses a risk of suffocation. Keep all packaging well away from children.

1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.

Levelling the Washing Machine

Warning! The lock nuts on all four feet must be screwed tightly against the housing.

1. Check if the feet are closely attached to the cabinet. If not, turn them to their original positions to tighten the nuts.
2. Check alignment with a spirit level and adjust as required.
3. Loosen the lock nut and turn the feet until they all contact the floor.
4. Check again with a spirit level and press down on all four corners to ensure there is no movement.

Connection of Inlet Hose, Tap and Washing Machine

Ensure proper connection to the tap and washing machine.

Warning! To prevent leakage or water damage, follow the instructions. Do not kink, crush, modify, or sever the water inlet or drainage hoses.

Operation

Prior to Commencing Use

Caution

• Ensure the washing machine is installed properly before washing.
• Before washing clothes for the first time, run a wash program with the machine empty to remove any residue from manufacturing processes.

Quick Start Guide:

1. Plug in the appliance.
2. Open the water tap.
3. Load clothes and close the door.
4. Add detergent.
5. Turn on the appliance.
6. Select Program.
7. Select Water Level.
8. Start the cycle.

Note: If 'One Touch Auto Wash' is engaged, steps 2 and 3 will be skipped.

After Washing Is Complete

A buzzer will sound when washing is finished, and the power will turn off automatically. Laundry can then be unloaded. When not in use, turn off the tap to avoid possible water leaks.

Articles of Washing That Require Attention

• Ensure the ambient temperature is between 0-40°C. If used below 0°C, the inlet valve and draining system may be damaged.
• Follow clothing label care instructions and use appropriate detergent for a top loader.
• Check labels.
• Empty all pockets.
• Tie long strips in knots and zip/button up clothing.
• Place small or delicate articles in a suitable wash bag.
• Turn easy-pilling and long-pile fabrics inside out.
• Separate lights and darks, and clothes with different textures.

Warning

• Washing single items can cause drum imbalance and stop the cycle. It is recommended to wash at least 2-3 items for balance.
• Ensure articles that have come into contact with flammable liquids are thoroughly rinsed in water before washing.

Washing Powder and Detergent Advice

• If using powder detergent, mix it with water before pouring into the detergent reservoir.
• Choose detergent specific to top loading washing machines and suitable for the desired water temperature for maximum performance.

Control Panel

The control panel allows selection of various washing parameters:

• Water Level: Select water level from 1 (low) to 8 (high) based on the amount of clothes. Indicator lights show the selected level.
• Display: Shows settings, estimated time, options, and status. It remains on throughout the cycle. For delay functions, it flashes the remaining time. During a cycle, it is solid with the remaining time. Note: If power is interrupted, the selected program is stored and resumes upon power restoration.
• Water Temperature: Select Hot, Warm, or Cold water. Both Hot and Cold indicators lit means Warm.
• Power: Turns the washing machine On or Off.
• Drum Clean: A function to clean the drum, pushing out dirt and grime. A flashing LED indicates it's active. This function is included in Mixed, Whites, Sport, and Intense programs.
• Start/Pause: Starts or pauses the wash cycle.
• Rinse: Select the desired number of rinses.
• Delay: Allows setting a delayed start time (up to 24 hours). Press the button until the delay light is off to disable. If the program has started, press Power to reset.
• Function: Select desired wash functions (Soak, Wash, Rinse, Spin, or combinations).
• Child Lock: Simultaneously press RINSE TYPE and PROG. buttons for 3 seconds to activate/deactivate. Locks all buttons except POWER.
• Program: Select the desired wash program. Solid LED indicates left program (Mixed, Whites, Sport, Rapid); flashing LED indicates right program (Daily, Delicate, Intense).
• Fast+: Engaged by pressing PROG. and TEMP. simultaneously. Reduces cycle time by 20-40% by increasing agitator intensity.

Program Variables

Adjustable parameters for wash programs:

• Water Level: Select based on load size (1-8).
• Rinse Type: Select number of rinses and activate Watersaver feature (prevents draining/spinning for water reuse).
• Function: Combine Soak, Wash, Rinse, or Spin.
• Temp: Select Hot, Warm, or Cold water.
• Delay: Set a delayed start time (up to 24 hours). Follow sequence: On -> Select Program -> Set Delay -> Start/Pause. To disable, press DELAY until the light is off.

Note: If power is interrupted during operation, the selected program is stored and resumes upon restart.

Manual Program Selection

Customize wash programs based on clothing type and quantity.

One Touch Auto Wash

This feature automatically detects load size and sets water level and program. After switching on, press START/PAUSE.

Wash Combinations Available

• Spin (x1)
• Wash Only
• Wash + Rinse
• Rinse + Spin
• Soak + Wash + Rinse + Spin*

*Extends program duration except for Sport, Daily, and Intense programs.

Child Lock

Locks all controls except POWER. Activate/deactivate by pressing RINSE TYPE and PROG. buttons simultaneously for 3 seconds.

Washing Program Table

Details of programs and their descriptions:

• Daily: Everyday program for normally soiled garments.
• Mixed: For mixed loads of cottons and synthetics.
• Sport: For durable garments like sportswear and outdoor wear.
• Rapid: 15-minute program for light clothing.
• Whites: For white cotton and synthetic garments, best with warm/hot water.
• Delicate: Softer cycle for easy-care garments (wool, silk, satin, synthetics, blends).
• Intense: Longer program with strong water stream and agitator for medium to heavily soiled garments.

Always consult clothing labels. If a garment is fragile, hand wash or skip the spin program.

**Program used for AS/NZS 2040 and AS/NZS 6400 Energy and Water ratings.

Model Specific Test Programs:

• ETL550FCW: Daily
• ETL700FCW: Daily, temperature 'Warm'
• ETL800FCW: Daily
• ETL1000FCW: Daily, water level 7, temperature 'Warm'

5.5kg Program Variables Table

*All duration times shown are represented in minutes unless otherwise indicated.

7kg Program Table

*All duration times shown are represented in minutes unless otherwise indicated.

8kg Program Table

*All duration times shown are represented in minutes unless otherwise indicated.

10kg Program Table

*All duration times shown are represented in minutes unless otherwise indicated.

Maintenance

Cleaning and Care

Warning! Before performing maintenance, unplug the machine and close the tap.

Proper maintenance extends the washing machine's working life. Clean the surface with diluted non-abrasive neutral detergents. Wipe off any water overflow immediately with a wet cloth. Do not place sharp items on or in the machine.

Note: Formic acid, diluted solvents, alcohol solvents, or chemical products are forbidden.

Cleaning the Filters

Note: Clean the inlet filter if water flow is not efficient.

Inlet Filters:

1. Unscrew the inlet hose from the back of the machine.
2. Pull out the filter with long-nose pliers and clean with a brush.
3. Reinstall the filter and reconnect the inlet hose.
4. Reconnect the inlet pipe.

Lint Filter:

1. There is a built-in lint filter that collects lint during the washing cycle.
2. Clean the lint filter every 10 cycles.
3. Take it out, clean with water, and place it back into the machine.

Cleaning the Drain Pump Filter

Only applicable to certain models.

Warning!

• Be careful of hot water!
• Allow detergent solution to cool down.
• Unplug the machine to avoid electric shock before cleaning.
• The drain pump filter traps lint and small foreign objects.
• Clean the filter periodically to ensure normal operation.

1. Drain water from the pump into a container.
2. Open the filter by turning counter-clockwise. Remove any foreign objects.
3. Clean the filters.
4. Re-insert the filter.
5. Tighten the pump cover clockwise.

Caution! Ensure the valve cap and emergency drain hose are reinstalled properly. Some machines may not have an emergency drain hose, in which case steps 2 and 3 can be skipped. Rotate the lower cover cap directly to allow water to run into a basin.

Troubleshooting

If the machine does not turn on or stops during operation, refer to the table below. Contact the service provider if a solution cannot be found.

Error Codes

Note: After checking possible causes, activate the appliance. If the problem persists or other error codes appear, contact the service centre.

Technical Information

Standard Water Pressures: 0.03-0.8MPa

Diagram showing dimensions W (Width), D (Depth), H (Height).

Manufacturer's Guarantee

This warranty is provided by Glen Dimplex Australia Pty Limited and Glen Dimplex New Zealand Limited for Euromaid products.

1. Euromaid Express Warranty

Subject to exclusions, the product is warranted against electrical or mechanical breakdowns for:

• 2 years for personal, domestic, or household use in Australia/New Zealand.
• 90 days for purposes other than personal, domestic, or household use (commercial use). Euromaid products are designed for domestic use only.
• All warranty repairs must be carried out by Glen Dimplex or their nominated service agent.

Note: Warranty periods may vary by agreement. Benefits are in addition to Consumer Guarantees and statutory rights.

2. Warranty Exclusions

This warranty does not apply if:

• The product was not installed, used, or operated according to the manual.
• Repairs are needed due to accident, misuse, incorrect installation, infestation, liquid spillage, unauthorized modification, incorrect voltage, power surges, tampering, unauthorized repairs, incompatible accessories, or corrosive conditions.
• The repair involves replacement of consumable parts (fuses, bulbs).
• Proof of purchase cannot be provided.
• The breakdown occurs after the warranty period expires.
• The product was not purchased as brand-new in Australia/New Zealand.

3. Consumer Guarantees

Goods come with guarantees that cannot be excluded under Australian/New Zealand Consumer Law. Consumers are entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage. Goods are also entitled to repair or replacement if they fail to be of acceptable quality and the failure is not major.

4. How to Make a Claim

Claims can be made via the website, customer care line, or email. To make a valid claim:

• Lodge the claim as soon as possible, no later than 14 days after becoming aware of the breakdown.
• Provide the product serial number.
• Provide reasonable proof of purchase (store receipt, handover form, etc.).
• Allow access to the premises for inspection if required.

5. Warranty Claims

If a valid claim is made and exclusions do not apply, Glen Dimplex will, at its election, repair or replace the product with one of identical specification. Refurbished goods or parts may be used for repairs. Products are for normal domestic use; liability for business loss is excluded.

Glen Dimplex Australia Pty Ltd
www.glendimplex.com.au
Australia
Ph: 1300 556 816
customer.care.ha@glendimplex.com.au

Glen Dimplex New Zealand Ltd
www.glendimplex.co.nz
New Zealand
Ph: 09 274 8265
nztechserv@glendimplex.co.nz