Important Safety Instructions
This product is professional photographic equipment intended for operation by professional personnel only. Always remove all transport protective materials and packaging before use.
- Read and understand the instruction manual thoroughly before use.
- Do not use damaged equipment or accessories. Repairs must be performed by authorized personnel.
- Disconnect power when not in use.
- Keep the device dry; it is not waterproof. Avoid immersion in water or use in humid, dusty, or overheated environments.
- Do not disassemble the product without authorization.
- Keep away from flammable or explosive environments, including alcohol, gasoline, methane, and ethane.
- Clean with a dry cloth only.
- Lithium battery lifespan is approximately 2-3 years. Regularly check battery status and consider replacement if charging time increases or battery life decreases significantly.
- The product's warranty period is one year; consumables like batteries and power cords are not covered.
- Unauthorized repairs will void the warranty.
Product Overview & Features
The Godox X3 N is a compact and lightweight (approx. 48g) TTL wireless flash trigger compatible with Nikon cameras. It supports i-TTL flash and High-Speed Sync (HSS) up to 1/8000s.
It can control various Godox 2.4GHz wireless X system flashes, including camera flashes, outdoor flashes, studio flashes, and retro flashes. When paired with the Godox X1R-N receiver, the X3 N can also control Nikon original camera flashes.
The trigger features excellent anti-interference capabilities with 32 channels and 99 IDs, ensuring stable performance in complex shooting environments.
Names of Parts
The Godox X3 N unit includes a touch screen, a select dial, an M/O button, a test button, and a USB-C port for charging and firmware upgrades. It also has an installing/detaching button, a mounting slot, and a hot shoe camera connection.
Important Tip: If abnormalities occur, simultaneously press the select dial and test button to reset the system. Then, press and hold the M/O button to restart. To detach the flash trigger, press and hold the installing/detaching button while grasping the hot shoe to pull it out horizontally.
Touch Operation Instruction
All parameters on the X3 N screen are adjustable via touch. Users can slide the screen up/down to check power steps or flash exposure values for multiple groups. Sliding down from the top reveals the 'Setting' menu for custom functions (C.Fn).
In single-group display, press 'M' to switch between TTL auto flash and M manual flash modes. Progress bars can be slid to quickly adjust power steps or exposure values. The screen can be locked by pressing the lock icon ? and unlocked by holding for 2 seconds. The buzz function ? and modeling lamp function ? can be toggled on/off.
Wireless Syncing
The X3 N can wirelessly sync with various Godox flashes via the 2.4GHz X system:
As a Wireless Retro Camera Flash Trigger (e.g., Lux Master)
Mount the X3 N on your camera's hot shoe. Power on both the trigger and the flash. On the X3 N, go to 'Setting' > 'Wireless' to set the Channel (CH) and ID. Ensure the Lux Master's channel and ID match the X3 N. The 'Wireless Sync' function on the X3 N can quickly set matching channels and IDs. Trigger the flash by pressing the camera shutter.
As a Wireless Camera Flash Trigger (e.g., V1 Series)
Similar to retro flashes, mount the X3 N and power on the V1 flash. Set matching channels and IDs via the X3 N's 'Setting' > 'Wireless' menu and the V1's wireless setting button and MENU. Trigger via camera shutter.
As a Wireless Outdoor Flash Trigger (e.g., AD600Pro)
Mount the X3 N and power on the AD600Pro. Set matching channels and IDs via the X3 N's 'Setting' > 'Wireless' menu and the AD600Pro's wireless setting button and GR/CH button. Trigger via camera shutter.
As a Wireless Studio Flash Trigger (e.g., QTIII)
Mount the X3 N and power on the QTIII. Set matching channels and IDs via the X3 N's 'Setting' > 'Wireless' menu and the QTIII's MODE/Wireless and GR/CH buttons. Trigger via camera shutter. Note: For studio flashes without TTL/Multi flash, the X3 N should be set to M mode for triggering.
As a Wireless Original Flash Trigger (e.g., SB-910)
Attach the Nikon original flash (SB-910) to an X1R-N receiver (sold separately). Mount the X3 N and power on. Set matching channels and IDs on the X3 N and the X1R-N receiver (via CH and Gr buttons). Trigger via camera shutter.
Custom Functions (C.Fn)
The X3 N allows users to customize various settings through the C.Fn menu. Access it by sliding down from the main interface and selecting 'Setting'. Options include Wireless settings (Channel, ID), Sync settings (Front Curtain, High Speed), Shooting Mode (One-Shoot, All-Shoot, L-858), Auto Off timer, Trigger Distance, Power Step, TCM conversion, ZOOM, Screen Brightness, Standby Time, and Language.
Troubleshooting & Care
Reasons for Not Triggering
- 2.4G Signal Interference: Adjust the channel (e.g., add 10+) or turn off other 2.4G devices.
- Flash Recycling/Overheat Protection: Ensure the flash has recycled and is not in an overheat protection state. Downgrade power output or switch to M mode if in TTL.
- Too Close Distance: If the trigger and flash are less than 0.5m apart, enable 'close distance wireless mode' and set triggering distance to 0-30m.
- Low Battery: Charge or replace batteries in both the trigger and receiver.
Flash Trigger Care
- Avoid sudden drops, impacts, or excessive stress.
- Keep dry; the product is not waterproof.
- Avoid sudden temperature changes to prevent condensation. Store in a handbag or plastic bag.
- Keep away from strong magnetic fields from radio transmitters.
Firmware Upgrade
The Godox X3 N supports firmware upgrades via its USB-C port. Updates will be released on the official Godox website. The upgrade requires Godox G3 V1.1 software. Connect the X3 N to a computer via USB-C cable. In power-on status, select 'Firmware Upgrade' on screen. In power-off status, press and hold the adjust dial while connecting USB-C to enter upgrade mode.
Technical Specifications
- Model: X3 N
- Compatible Cameras: Nikon cameras (i-TTL auto flash)
- Built-in Lithium Battery: 3.7V-850mAh
- Charging Time: Approx. 2 hours
- Standby Time: Approx. 7 days
- Flash Modes: i-TTL Auto Flash, Manual Flash, Multi Flash, High Speed Sync, Front Curtain Sync, Rear Curtain Sync
- Flash Exposure Compensation: ±3EV (1/3 EV increments)
- Modeling Lamp Control: Yes, by flash trigger
- Buzz Control: Yes, by flash trigger
- ZOOM Setting: AUTO/Focus length 24-200mm
- TCM Transform: Transforms TTL shooting value to M output value
- Display: Touch screen with adjustable brightness
- Transmission Range: Approx. 0-100m
- Built-in Wireless: 2.4GHz
- Channels: 32
- Wireless ID: OFF/01-99
- Groups: A-F, 0-9
- Dimensions: 41mm × 47mm × 39mm (1.61" × 1.85" × 1.54")
- Net Weight: Approx. 48g
Compliance & Warranty
Declaration of Conformity
GODOX Photo Equipment Co. Ltd. declares this equipment complies with Directive 2014/53/EU. This product is allowed for use in all EU member states. For more information, please visit: https://www.godox.com/eu-declaration-of-conformity/
Warranty Information
The warranty period for products and accessories is based on the Product Maintenance Information, calculated from the purchase date. Valid warranty cards are required for service. Inapplicable cases include expired warranty, damage from improper use or unauthorized repairs, missing identification, or force majeure events.
