Manuals+

Ricoh Projector Basic Operations

Connecting an Audio Device (Audio) and the Remote Controller

This section details how to connect an audio device and the remote controller to the projector.

Note

  • If speakers without built-in amplifiers are used, prepare a separate amplifier.
  • When external speakers are connected, no sound is output from the main unit's speakers.
  • The volume of the external speaker can be adjusted with the [Volume +/-] button.
A diagram shows two speakers connected via audio cables (φ3.5) to the back of the projector. The projector also shows connections for Remote In, Audio Out, HDMI, Service, LAN, HDBase-T, USB, and PC Control. A remote control is shown connected to the projector via an audio cable (φ3.5).

Connecting a USB Device

This section explains how to connect a USB device to the projector.

A diagram shows a USB memory device connected to the USB port on the back of the projector. The projector's rear panel connections are visible, including Remote In, Audio Out, HDMI, Service, LAN, HDBase-T, and USB.

Using the power cord stopper

To prevent the power cord from accidentally removing from the AC IN of the projector, use the power cord stopper.

Note

If you pull on the power supply cord while the connector is fixed, the main unit may fall down and be damaged.

CAUTION

To prevent the power cord from coming loose, make sure that all the prongs of the power cord are fully inserted into the AC IN terminal of the projector before using the power cord stopper to fix the power cord. A loose contact of the power cord may cause a fire or electric shock.

Installing the power cord stopper

  1. With the clamper facing the power supply cord, align the tip of the power supply cord stopper with the hole below the AC IN terminal and push it in.
  2. Pass the power supply cord through the clamper and press the clamper to fix it.
  3. Pass the power supply cord through the clamper and press the clamper to fix it.
Two diagrams illustrate the installation of the power cord stopper. The first shows the stopper being inserted into a hole near the AC IN terminal. The second shows the power cord being passed through the clamper and secured.

Disconnecting the power cord stopper

  1. Pull to an appropriate position while pushing down the knob of the power cord stopper.
  2. Press down the knob on the clamper to open the clamper and take out the power cord.
  3. Push and pull the fitted part of the power cord stopper from the left and right to remove it from the main unit.
Three diagrams show the process of disconnecting the power cord stopper. Each diagram highlights the knob and clamper, illustrating how to release the power cord.

Powering On/Off the Projector

Powering on the Projector

  1. Please make sure the power cord and power cord stopper are securely connected. The Power indicator will turn red.
A diagram shows the power cord and stopper connected to the projector's AC inlet.
  1. Turn on the projector by pressing the [Power] button ▶️ on the top control panel or on the remote control.
Images show the projector's control panel with the power button highlighted, and a remote control with the power button also indicated.

The Power indicator will flash blue. The startup screen will display and the Power indicator will turn blue.

  1. The first time you use the projector, you will be asked to select the preferred language. Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically.

Make sure that the [Auto Source] has been set to [On].

* [Auto Source] is set to [On] as a factory default value.

Note

Turn on the projector first and then the signal sources.

Note

  • Make sure that the power plug is fully inserted into both the projector AC inlet and the wall outlet.
  • The AC outlet must be near this equipment and must be easily accessible.

Note

If you connect multiple sources at the same time, press "Input" to switch inputs.

Models: BBP-OTY0GV1, BBPOTY0GV1, OTY0GV1 Connecting a Audio Device and the Remote Controller, OTY0GV1, Connecting a Audio Device and the Remote Controller, Audio Device and the Remote Controller, Device and the Remote Controller, Remote Controller, Controller

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=7543497 iLovePDF

Related Documents

Preview RICOH OTY0GV1 Projector User Manual: Operations and Settings
Comprehensive user manual for the RICOH OTY0GV1 projector, covering basic operations like dongle storage and detailed settings for image, screen, multi-projection, and network configuration. Includes operational guides and setup instructions.
Preview Ricoh IM C Series User Guide: Operation and Specifications
Comprehensive user guide for Ricoh IM C2010, C2510, C3010, C3510, C4510, C5510, and C6010 series multifunction printers, covering operation, maintenance, troubleshooting, and specifications.
Preview RICOH PJ WXL5860/WUL5860 Projector User Manual: Setup, Operation, and Safety
This user's manual provides comprehensive instructions for the RICOH PJ WXL5860 and WUL5860 projectors, covering setup, basic operations, advanced settings, troubleshooting, and safety precautions.
Preview RICOH PJ WUL6670/WUL6680/WUL6690 Projector User Manual: Setup, Operation, and Troubleshooting
This user manual provides comprehensive guidance on setting up, operating, and troubleshooting the RICOH PJ WUL6670, WUL6680, and WUL6690 projectors, covering basic operations, advanced settings, and safety precautions.
Preview RICOH PJ KU12000 Series User's Manual: Safety and Operation Guide
Comprehensive user's manual for the RICOH PJ KU12000 Series projector, detailing essential safety information, operational guidelines, and handling precautions for safe and effective use.
Preview RICOH R10 Camera User Guide
Comprehensive user guide for the RICOH R10 digital camera, detailing basic and advanced shooting operations, key features, playback functions, safety precautions, and camera settings. Learn to capture high-quality images and manage your photos effectively.
Preview Ricoh IM 370, IM 370F, IM 460F Multifunction Printers - Overview and Specifications
Discover the Ricoh IM 370, IM 370F, and IM 460F, compact A4 black and white multifunction printers designed for modern digital workspaces. Explore features like fast print/scan speeds, enhanced usability with a 7" Smart Operation Panel, robust security with Always Current Technology, and sustainability initiatives.
Preview RICOH IM 370/370F/460F User Guide: Operation, Features, and Troubleshooting
Official user guide for RICOH IM 370, 370F, and 460F multifunction printers. Covers setup, copying, scanning, faxing, maintenance, and error resolution for enhanced office productivity.