H3C NX30PLUS Dual-Band Gigabit Wi-Fi 6 Router

Quick Start Guide

Welcome to Your New Wi-Fi 6 Router

This guide will help you quickly set up your H3C NX30PLUS router, bringing you fast, reliable, and secure wireless connectivity. Designed for ease of use, the NX30PLUS supports the latest Wi-Fi 6 standard for enhanced performance.

What's Included

The H3C NX30PLUS Wi-Fi 6 Router
Power Adapter
Ethernet Cable
Quick Start Guide (this document)

Step 1: Hardware Setup

Connecting Your Router

To begin, connect the necessary cables:

Connect your modem to the router's WAN port using the provided Ethernet cable. The WAN port is typically colored differently (e.g., blue) and labeled "WAN" or "Internet".
Connect your computer to one of the router's LAN ports using another Ethernet cable for initial setup, or prepare to connect wirelessly. LAN ports are usually yellow or orange and labeled "LAN".
Connect the power adapter to the router's power port and plug it into a wall outlet.

Diagram Description: The rear panel of the NX30PLUS router features a WAN port, multiple LAN ports, a power input port, and a reset button. LED indicators are also present to show device status.

Powering On and Initializing

After connecting the power adapter, the router will start up. Wait for the LED indicators to stabilize. This process may take a few minutes.

LED Indicator Guide:

? Power LED: Indicates the router is receiving power. Should be solid green.
? Internet LED: Shows the connection status to your ISP. Should be solid green or blinking green when connected.
? Wi-Fi LED: Indicates Wi-Fi is broadcasting. Should be solid or blinking green.
? LAN LED: Lights up when a device is connected via Ethernet.

Step 2: Initial Configuration

Accessing the Router's Web Interface

You can configure your router using a web browser. Ensure your computer or mobile device is connected to the router (either via Ethernet or the default Wi-Fi network).

Open a web browser and enter the router's default IP address in the address bar. This is typically 192.168.1.1 or 192.168.0.1. Check the label on the bottom of your router for the exact address, default SSID, and password.

You will be prompted to log in. Use the default username and password found on the router's label.

Setting Up Your Wi-Fi Network

Once logged in, navigate to the Wi-Fi settings section. Here you can:

Change the Wi-Fi network name (SSID) for both the 2.4GHz and 5GHz bands.
Set a strong, unique password for your Wi-Fi network. It is recommended to use WPA2 or WPA3 security protocols.

Configuring Your Internet Connection

Go to the Internet or WAN settings. Your ISP will provide the necessary connection type (e.g., DHCP, PPPoE) and credentials if required. Follow the on-screen prompts to establish your internet connection.

Tip: If you are unsure about your ISP settings, consult your Internet Service Provider.

Key Features of the NX30PLUS

Wi-Fi 6 (802.11ax): Experience faster speeds, lower latency, and improved capacity.
Dual-Band Connectivity: Supports both 2.4GHz and 5GHz bands for optimal performance and compatibility.
Gigabit Ethernet Ports: Provides high-speed wired connections for devices like PCs, gaming consoles, and smart TVs.
Easy Setup: Intuitive interface and guided setup process for quick deployment.
Enhanced Security: Supports modern security protocols to protect your network.

Further Assistance and Resources

For detailed information, advanced settings, firmware updates, and customer support, please visit the official H3C website:

H3C Official Support Portal

Model numbers: NX30PLUS, NX18 Plus, NX30 Plus. Manufacturer: H3C.

	H3C Magic NX30 Wireless Router Installation Quick Start Guide Get started quickly with the H3C Magic NX30 Wireless Router. This guide provides essential setup instructions, Wi-Fi configuration steps, mesh networking information, and troubleshooting tips for your H3C router.
	H3C 12500R IS-IS Route Summarization Configuration Examples Guide This guide provides practical configuration examples for IS-IS route summarization on H3C 12500R Switch Router Series devices. Learn how to optimize network routing and system resources through detailed procedures and sample configurations.
	H3C WA6321H 802.11ax Access Point Datasheet Datasheet for the H3C WA6321H, an 802.11ax Wi-Fi 6 dual-radio access point with 4-stream MU-MIMO, designed for enterprise offices, retail stores, hotels, and smart enterprise campuses.
	H3C Distribution Main Network Routers Product Manual This manual provides detailed information on H3C's range of distribution main network routers, including models like SR6600, MSR series, MSR-XS, MER series, ERG3, and ERG2. It covers product introductions, features, specifications, and application scenarios for enterprise and business use.
	New H3C Technologies Compliance and Safety Manual This document provides essential safety information, regulatory compliance details, and warning symbol conventions for New H3C Technologies products, ensuring safe operation and adherence to standards.
	H3C Access Controllers Network Management and Monitoring Configuration Guide A comprehensive guide for H3C Access Controllers, detailing network management, monitoring, Embedded Automation Architecture (EAA), flow logs, NQA, and NETCONF configurations for network administrators and engineers.
	H3C UniServer R4900 G5 Server: High-Performance 2U Rack Server Explore the H3C UniServer R4900 G5, a 2U rack server designed for intelligent compute in data centers. Featuring 3rd Gen Intel Xeon Scalable processors, up to 12TB of memory, and high scalability for virtualization, big data, and AI applications.
	H3C WA7220-LI Wireless Access Point Quick Installation Guide This guide provides instructions for the installation of the H3C WA7220-LI Wireless Access Point, covering tool references, installation accessories, and mounting procedures for both wall and ceiling installations. It also details cable connections and power supply options.