Generac WiFi Module

Dear Valued Customer,

Thank you for choosing a Generac Home Standby Generator for peace of mind and security during power outages. Due to ongoing global shortages and inconsistent supply of microprocessor chips, your generator was shipped without the module that enables it to connect to your WiFi network and communicate with the Mobile Link Remote Monitoring app.

This package includes the WiFi accessory and simple do-it-yourself instructions for installation and connection to your home network. We have also included instructions to help you monitor your generator with the Mobile Link Remote Monitoring app.

Thank you again for your purchase and trust in the Generac brand. For any questions regarding the WiFi module shipment and homeowner installation, please contact Generac directly at 855-436-8439 or visit www.generac.com/wifikitinstall.

Generac Power Systems, Inc.

For installation videos, scan the QR code or visit: www.generac.com/wifikitinstall (English) or www.generac.com/wifikitinstall-fr (French).

Document Reference: A0001584196 REV A

Installation Instructions

Questions? Call 855-436-8439 or visit www.generac.com/wifikitinstall

1. Step 1: Remove the identification tag from your new WiFi Module. IMPORTANT: DO NOT LOSE THIS TAG. You will need this later to create your Mobile Link account.
   [Image: An identification tag attached to a cable.]
2. Step 2: Locate and remove the gray plug on the back of your Home Standby Generator. If you encounter difficulty, use the supplied wedge tool to loosen it.
   [Image: The back of a generator with a gray plug being removed using a wedge tool.]
3. Step 3: Using the supplied wedge, remove the clear plastic retainer holding the connector plug. The retainer cover and the gray plug can be discarded.
   [Image: A wedge tool is shown removing a plastic retainer from a connector plug.]
4. Step 4: Connect the WiFi accessory plug to the generator connector plug. Ensure the connectors click securely into place.
   [Image: The WiFi accessory plug is being connected to the generator's connector plug.]
5. Step 5: Locate the "TOP" of the WiFi accessory. With the top facing upward, gently guide the wiring back into the generator opening and push the WiFi module into place until the two tabs click.
   [Image: The WiFi module is being inserted into the generator opening, with the top oriented correctly, until it clicks.]