How to Use
Use the PMD Clean Pro daily to deeply cleanse your skin.
Step 01: Rinse & Apply Cleanser
[Image: A woman rinsing her face with warm water.] Rinse face with warm water and gently rub in cleanser.
Step 02: Wet & Power On Device
[Image: A hand holding the PMD Clean Pro device under running water.] Rinse PMD Clean Pro under water and power on device. We recommend modes 1 and 2 for optimum cleansing results.
Step 03: Smart Cleansing
[Image: A woman smiling while using the PMD Clean Pro device on her cheek.] Move brush head in circular motions, cleansing the entire face. It is safe to spend more time in areas that may be of personal concern.
Step 04: Rinse & Pat Dry
[Image: A woman gently drying her face with a towel.] Rinse face and PMD Clean Pro of any excess cleanser, then pat dry.
Step 05: Massage in Serums
[Image: A woman holding the PMD Clean Pro device to her face, demonstrating the back side for massage.] Apply skincare products and use the back side of the PMD Clean Pro on mode 3 or 4 to gently massage. By powering on ActiveWarmth™ on the PMD Clean Pro, serums will be more effective and absorb deeper into the skin.
Step 06: Lift, Firm & Tone
[Image: A woman smiling while holding the PMD Clean Pro device to her face.] We recommend using mode 3 or 4 for massaging. By operating at a perfect frequency, the PMD Clean Pro lifts, firms, and tones the skin. Through the pulsations of the device, blood flow is stimulated and collagen production is increased.
How to Charge
Step 01: Charging Port
[Image: A hand holding the PMD Clean Pro device, showing the rose gold charging port at the base.] The charging port can be found in the center of the device's base.
Step 02: Insert Charger
[Image: A hand inserting the charging cable into the PMD Clean Pro device's charging port.] Insert the long, thin end of the cord into the bottom of the device. The charging hole is tight to ensure it is waterproof and may require a stronger push than expected. Plug the opposite end of the charging cord into a USB outlet adapter.
Step 03: Charging Time
If the power button light turns on, the device is charging. The light will turn off when fully charged (approximately 3 hours).
