Amana 20" Freestanding Gas Range Installation Instructions
This document provides essential installation instructions for the Amana 20-inch freestanding gas range with a standard clean oven. It details critical safety measures, necessary tools and parts, and step-by-step procedures for a secure and proper setup.
Key Installation Steps
The guide covers crucial aspects such as:
- Range Safety: Emphasizing important safety messages and precautions to prevent injury or damage.
- Installation Requirements: Outlining necessary tools, parts, location considerations, electrical, and gas supply requirements.
- Installation Procedure: Detailing how to unpack the range, install the anti-tip bracket, make gas connections, level the appliance, and verify the electronic ignition system.
- Gas Conversions: Providing instructions for converting the range from natural gas to LP gas or vice versa, including adjustments to the gas pressure regulator and burner orifice spuds.
Important Safety Information
Users are strongly advised to read and adhere to all safety warnings, including those related to potential fire, explosion, and tip-over hazards. Proper installation by a qualified technician is recommended, especially for gas connections and conversions.
Additional Resources
For further details on operation, care, and troubleshooting, consult the Use and Care Guide. Information on contacting Amana for assistance or service can be found within that guide.
