Didi Table Light User Manual
Model: IL4111
Recommended Bulb
1 x 5W LED GU10
Bulb included
Specification
Max power: 6W
Voltage: 220~240V, 50Hz
IP Rating: IP20
Weight: 0.5Kg
Important Information
Please retain these instructions for future reference.
This symbol [0.3m distance marker] indicates that this product should be installed so the bulb is no closer than 30cm from the surface it is illuminating.
This symbol [recycle symbol] indicates that this product should not be treated as normal household waste and it should be recycled. John Lewis does not operate in-store take back, but as members of the Distributor Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.
We have taken great care to ensure that this product reaches you in perfect condition. However, should any parts be damaged or missing please e-mail lightingparts@JLPspares.co.uk.
A visual representation of the Didi table light shows a cylindrical lamp with a top-facing light source.
Troubleshooting
Why is the light not working when switched on?
- Check your power supply is switched on.
- Turn off light and check that the bulb is inserted correctly.
- Check the bulb is still in working order.
Contact Information
John Lewis partnership
171 Victoria Street
London SW1E 5NN
Made in China
Issue: 02 12/19
Warnings
The supply cable runs through the inside of this product. Take care not to place undue stress on the cable whilst unpacking to prevent the possibility of a poor connection.
If you are in any doubt, consult a person competent to give advice on the assembly of electrical equipment.
If the external flexible cable of the lamp is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
To prevent electrocution, switch off at the mains supply before assembling or maintaining this fitting. Ensure the plug is not connected to any power supply and read instructions before assembly.
Always be sure to use the correct type and wattage of bulbs as indicated on the fitting. Never exceed the wattage stated.
When changing the bulb, always switch off at the mains and allow the old bulb to cool down before handling. Dispose of used bulbs carefully.
Caution! The bulb and surrounding parts can become hot during use.
The fitting should be installed so the bulb is no closer than 30cm from the surface it is illuminating.
For indoor use only.
Care Instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish. Replace bulbs from John Lewis or established brands of the same type and compatibility.
Parts List
| Part | Description | Qty |
|---|---|---|
| A | Lamp Body | 1 |
| B | Bulb | 1 |
| C | Power Cable Assembly | 1 |
Instructions for Use
Step 1: Setup
Carefully unpack the product from its packaging. The LED bulb is pre-fitted to the product. This product has a tilt angle range of approximately 10° [tilt arrow symbol]. Insert the wall plug into mains power outlet.
Step 2: Bulb Replacement
Unplug the lamp from the wall outlet and allow the lamp to cool before replacing the bulb.
Remove the bulb using a bulb suction fitting tool, turning anticlockwise to remove the bulb.
Insert a new bulb into the lamp holder. The table lamp is now ready for use.
Supplied LED GU10 Bulb Information
Energy Efficiency Class: A++ to E
Wattage: 5W
Lumens: 345
Color Temperature: 3000K Warm White
Color Rendering Index (CRI): 80
Lifespan: 15,000 hours
Switching Cycles: >15,000
Instant On: Yes
Beam Angle: 36°
Equivalent Wattage: 50W
Energy Consumption: 5 kWh/1000h
One moment, please...
