RD-200-SO Side Outlet Roof Drain
Engineering Specification
Model: ES-WD-RD-200-SO
Product Overview
The Watts RD-200-SO is an epoxy-coated cast iron side outlet roof drain. It is equipped with a flashing clamp featuring an integral gravel stop and a standard self-locking polyethylene dome. The drain is designed with a no hub outlet for secure connection.
For technical assistance, please contact Watts customer service.
Project Information Fields
The following fields are provided for project documentation and specification tracking:
- Job Name: _________________________
- Job Location: _________________________
- Engineer: _________________________
- Approval: _________________________
- Contractor: _________________________
- Contractor's P.O. No.: _________________________
- Representative: _________________________
Pipe Sizing Options
| Suffix | Description |
|---|---|
| 2 | 2"(51) Pipe Size |
| 3 | 3"(76) Pipe Size |
| 4 | 4"(102) Pipe Size |
Drain Component Options
| Suffix | Description |
|---|---|
| -13 | Galvanized Body & Clamp |
| -B | Sump Receiver |
| -GSS | Stainless Steel Ballast Guard |
| -K | Ductile Iron Dome |
| -K13 | Galvanized Dome |
| -K80 | Aluminum Dome |
| -K81 | Rough Bronze Dome |
| -K83 | SS Mesh Covered Dome |
| -L | Vandal Proof Dome |
| -R | 2" External Water Dam |
| -W | Adj. Internal Water Dam |
Product Dimensions and Diagram Description
The RD-200-SO Side Outlet Roof Drain features a cast iron body with a side outlet elbow and a domed strainer. The strainer is black and has a grid pattern for drainage, with an integrated gravel stop around its base.
A technical drawing illustrates the product's dimensions. Key measurements are:
- Overall height of the dome: 9 1/4 inches (235 mm)
- Height of the dome from the mounting flange: 5 5/16 inches (135 mm)
- Height of the body from the mounting flange: 5 3/4 inches (146 mm)
- Width from the mounting flange to the center of the side outlet: 4 1/16 inches (103 mm)
- Overall width of the unit: 8 5/8 inches (219 mm)
- The width of the outlet connection itself is 4 9/16 inches (116 mm)
- Dimension 'A', representing the height of the outlet connection, varies by pipe size and is detailed in Chart A.
- The required deck opening is 6 1/2 inches (165 mm), and the sump receiver size is 8 inches (203 mm).
- The free area for drainage is 35 square inches.
Chart A: Pipe Size vs. Dimension A
| Pipe Size | A |
|---|---|
| 2"(51) | 4 5/8"(117) |
| 3"(76) | 4 3/32"(104) |
| 4"(102) | 3 5/8"(92) |
Important Notice
The information contained herein is not intended to replace the full product installation and safety information available or the experience of a trained product installer. You are required to thoroughly read all installation instructions and product safety information before beginning the installation of this product.
General Information and Contact
Watts product specifications in U.S. customary units and metric are approximate and provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Contact Information
- USA: T: (800) 338-2581 ? Watts.com ?
- Canada: T: (888) 208-8927 ? Watts.ca ?
- Latin America: T: (52) 55-4122-0138 ? Watts.com ?
Document Reference: ES-WD-RD-200-SO 2536
© 2025 Watts
