ProLaser 4 Quick Reference Guide

ProLaser 4 Rear Panel Controls and Display

The ProLaser 4 rear panel features a display and several controls. The display shows current measurements including speed (e.g., 94 mph), range (e.g., 1034 ft), time (e.g., 00:45), and FCR (e.g., 99 ft, 0.8s). Indicators on the panel include: Power/Display Brightness control, Target Direction Indicator, Units selector, Menu button, Count-Up Timer, Model Receding button, Volume Approaching button, Follow Too Close Results button, Poor Weather/HUD Brightness control, Poor Weather Icon indicator, LASER Indicator, Battery Level indicator, and a Self-Test/Display Lock button.

Head-Up Display (HUD) Elements

• FTC Indicator
• V1
• Range
• Reticle
• Speed & Direction
• +94
• Time Trak Indicator

ProLaser 4 Menus

Distance

Sets min/max range limits to target vehicle for school and work zone enforcement. Fire the LASER at the desired target or use up/down arrows to enter values. Press enter to set min/max ranges. Any target measured outside the range limits will not be displayed.

Set Direction

Sets target direction discrimination to Approaching only, Receding only, or Both.

DIF-TEST

Two-target, differential distance accuracy test mode.

Continuous/ Single

Sets enforcement mode to continuous target measurement or single shot mode (option).

Units

Select between mph/km/h; mph/knots; or km/h/knots (option).

HUD Options

Toggle Range in HUD on/off. Select from four aiming reticles.

Events

Displays last 100 locked targets with Speed, Range and Direction with date and time stamp.

Set Time/Date

Set date and time in 24 hour format (option).

Stopwatch

Average speed over distance enforcement mode (option).

Accuracy Tests

Self-Test

Press the test button to run internal accuracy tests.

HUD Alignment Test

Place the ProLaser 4 in range mode. Select an isolated target ~100 feet away and sweep HUD horizontally and vertically across target. Listen for audio tone and verify aiming reticle on target coincides with tone and range measurement in HUD.

Differential Distance Test

Select two targets ~ 50 and 100 feet away. Target each when prompted and verify range accuracy.

ProLaser 4 Multi-function Buttons

Single Press

• [Rear Display Brightness]
• [HUD Brightness (Poor Weather in Menu)]
• [Menu] ☰
• [Mode (In Menu)]
• [Volume (Down In Menu)]
• [Display Lock (Enter button in Menu)]

Press and Hold

• [Power On/Off] ?️
• [Poor Weather Mode]
• [Receding Only Targets]
• [Approaching Only Targets]
• [Self-Test]
• [Mark Select Events (Option)]

First Time Operation

1. Install 4-AA batteries in the [Battery Compartment], or plug in USB ?.
2. Press and hold the [Power On/Off] ?️ button to power on/off.
3. Hold the unit by the pistol grip and aim through the HUD, with both eyes open.
4. Press and hold the [Trigger] to fire the [Laser].
5. Place the aiming reticle on the target vehicle. Continue target tracking through the HUD.
6. While holding trigger down, Speed and Range continually update in the HUD and on the rear display.
7. Audio tones provide targeting feedback. A solid tone indicates target successfully acquired ✔️.
8. Release the trigger to lock the measurement in the HUD and rear panel display.

The ProLaser 4 will enter (default) sleep mode after two (2) minutes, and will power down after 15 minutes. Sleep timers are adjustable.

Recall Events

To recall events:

1. Press the [Menu] ☰ button.
2. Select Events.
3. Use the [Up] ⬆️ / [Down] ⬇️ buttons to scroll through up to 100 previous measurements on the rear panel.

Example Display: Recalled Events. Date Time: 05/21/2012 17:28:47. Speed Range: +015 mph 0167 ft.

Download Events Data

ProLaser 4 allows the user to download measurements over the USB ? to a spreadsheet using a PC utility. The utility may be downloaded from the Kustom website from the ProLaser 4 product and Service pages.

The Events data includes Speed & Range measurements with date & time, units, tracking history time, and serial number as shown below: