Step 1
Press Enter on the inverter screen.
Inverter Screen Display:
Status: Generating
29-03-2021 16:01
[ESC] [ENTER]
[UP] [DOWN]
Enter
Step 2
Use Up/Down keys to navigate to 'Advanced Settings' and press Enter.
Inverter Screen Display:
Advanced Info.
Advanced Settings
[ESC] [ENTER]
[UP] [DOWN]
Enter
Up and Down Keys
Step 3
Press the Down key twice and the Up key once to enter the password '0010'. Then press Enter.
Inverter Screen Display:
YES=<ENT> NO=<ESC>
Password: 0010
Enter
Up and Down Keys
Step 4
Use the Up/Down keys to scroll to 'Grid ON/ Grid OFF'. Then press Enter.
Inverter Screen Display:
Select Standard
Grid ON/OFF
[ESC] [ENTER]
[UP] [DOWN]
Enter
Step 5
Select the 'Grid OFF' option and press Enter. The operation light should turn OFF.
Inverter Screen Display:
Operation light turned OFF
Grid ON
->Grid OFF
[ESC] [ENTER]
[UP] [DOWN]
Enter
Step 6
Press the Up/Down key until you find 'STD. Mode Settings'. Press Enter.
Inverter Screen Display:
Special Settings
->STD. Mode Settings
Enter
Step 7
Press the Up/Down key until you see '10 mins Voltage Set'. Press Enter.
Inverter Screen Display:
Power Priority
10 Mins Voltage Set
[ESC] [ENTER]
[UP] [DOWN]
Enter
Step 8
Change the voltage value by pressing the Up key. The default 10-minute voltage set is 255V or 257V. The maximum settable voltage is 258 Volts. Press Enter to save.
Step 9
Turn the Grid ON in Advanced Settings. Navigate back to Advanced Settings (press ESC thrice), enter the password '0010', go to 'Grid ON/Grid OFF', select 'Grid ON', and press Enter.
Completion
"ALL DONE"
HAVE A GOOD DAY!
Solis Australasia - Solis: World 3rd Largest PV inverter Manufacturer Globally
