Everbilt Pedestal Pump Quick Start Guide

(Pump pictured is typical)

Read your manual for installation, operation, and safety information. This guide neither supplements nor replaces the Owner’s Manual.

Installation Steps

Attach discharge pipe to the pump discharge. Drill a 1/8” anti-airlock hole as shown.

Diagram Description: Shows a pedestal sump pump with a discharge pipe attached. An anti-airlock hole is indicated on the pipe near the pump. A check valve is shown above the discharge pipe.

Discharge size: SKU# 1004162175: 1-1/2 in. FNPT or 1-1/4 in. FNPT (with adaptor) SKU# 1004162140: 1-1/4 in. FNPT
Connect a check valve to the discharge pipe. Be sure the flow is away from the pump.
Ensure Pit/Basin is clear of all debris. Lower the pump into the center of the sump pit or sump basin. Pit/Basin should be at least 12” diameter and 18” deep.

Diagram Description: Illustrates a sump pump placed in a sump pit. The pit has a minimum diameter of 12 inches and a minimum depth of 18 inches. The pump is connected to a discharge pipe.
Plug into a GFCI protected outlet.

Diagram Description: Shows the sump pump's power cord plugged into a GFCI protected electrical outlet.
Check the pump’s operation by filling the sump pit or basin with water.

NOTE: The Float Switch comes pre-assembled. Refer to your owner’s manual if you need to adjust the ON and OFF position of the float switch.

	Everbilt Submersible Sump Pump Quick Reference Guide This guide provides essential steps for installing and operating an Everbilt submersible sump pump. It covers preparing the sump basin, connecting the discharge pipe with a check valve and vent hole, plugging into a GFCI outlet, testing the pump's operation with its float switch, and installing an optional basin cover. Refer to the full instruction manual for comprehensive details.
	Everbilt Submersible Sump Pump Use and Care Guide Comprehensive guide for the installation, operation, and maintenance of Everbilt submersible sump pumps. Includes safety information, troubleshooting tips, and warranty details.
	EVERBILT Effluent Pump Quick Reference Guide Quick reference guide for installing and testing the EVERBILT Effluent Pump, detailing basin preparation, discharge piping, power connection, and operation testing procedures.
	Everbilt Sump Pump Use and Care Guide: HDS30, HDS50, HDS75 This guide provides essential information for the safe installation, operation, maintenance, and troubleshooting of Everbilt Sump Pumps, models HDS30, HDS50, and HDS75. Learn about safety precautions, performance charts, required materials, and warranty details.
	Everbilt Non-Submersible Water Transfer Pump Use and Care Guide Comprehensive guide for the Everbilt Non-Submersible Water Transfer Pump, covering performance, safety, installation, operation, care, and troubleshooting. Includes specifications and warranty information.
	Everbilt 2-in-1 Utility Pump Use and Care Guide Comprehensive guide for the Everbilt 2-in-1 Utility Pump, covering performance, safety information, installation, care, and troubleshooting for both submersible and non-submersible applications.
	Everbilt 2-in-1 Utility Pump Quick Start Guide A quick start guide for the Everbilt 2-in-1 Utility Pump (Model UTA02510), providing instructions for setup, operation, and safety in both English and Spanish.
	Everbilt 4" Submersible Pump Quick Reference Guide Quick reference guide for Everbilt 4" submersible pumps, covering wiring diagrams, connection types, and general pumping depth guidelines by horsepower. Includes electrical safety alerts and wiring instructions.

Installation Steps

Related Documents