Android TV Box User Manual
1. Getting Started
1.1 Basic Operations
1.1.1 Power On/ Off and Sleep
- Connect the box to the TV with an HD cable, connect the box to the power adapter, and connect a mouse, air mouse, or other input devices with a USB port.
- After the device and cable are connected, the power LED turns blue.
- After the device and cable are disconnected, the power LED turns off.
- In power-on mode, press the remote control's power button to enter sleep mode.
- In sleep mode, the device will wake up when you press the remote control's power button.
1.1.2 Open applications
Use the remote control's arrow keys to choose the desired program, and click the OK button to open the selected program.
1.1.3 Switch in applications
Click "My Apps" to view recently used programs, then click the program icon to switch applications.
1.1.4 Close Applications
Click the icon [close icon] to view recently used programs. Choose one by clicking and holding, then drag it to a blank area to close the application. *This function only operates in Mouse mode.
1.1.5 Back To Home Screen
Click the icon [home icon] to return to the home screen. Click the icon [home icon] on the remote control to return to the home screen.
1.1.6 Read External Storage Data
Read U Disk
Insert a U flash disk or removable hard disk into the USB port while the device is powered on. The USB icon will appear in the top left corner of the desktop. Open "FileBrowser". The identified USB(A:) will appear under "Local Disk". U disk operation is now available.
[Image description: A screenshot of the FileBrowser interface showing a list of devices including 'Device List', 'Local Disk', and 'USB(A:)'.]
Read TF card
Insert the TF card into the device while it is powered on. When the TF card icon appears in the top left corner of the desktop, open "FileBrowser". The identified external storage card will appear under "Local Disk". TF card operation is now available.
[Image description: A screenshot of the FileBrowser interface showing a list of devices including 'Device List', 'Local Disk', and 'External Storage Card'.]
1.1.7 WIFI Function
Home Screen → Settings → Network → Select "Wi-Fi" to open the WIFI function.
Choose hotspot → Input Password → Connect to the network.
[Image description: A screenshot of the Wi-Fi network selection screen showing available networks and connection status.]
1.1.8 Ethernet Function
Home Screen → Settings → Network → Select "Ethernet" to open the Ethernet function.
Insert the network cable, and the network will be connected automatically.
[Image description: A screenshot of the Ethernet network connection screen showing connection status and IP details.]
1.1.9 WLAN Hotspot
Operations on the box:
Home Screen → Settings → Other → More Setting → Portable hotspot → Select "Portable Wi-Fi hotspot".
[Image description: A screenshot showing the portable hotspot settings with options to enable or configure.]
Select "Set up Wi-Fi hotspot" to configure "Network SSID", "Security", and "Password" parameters.
[Image description: A screenshot of the Wi-Fi hotspot setup screen with fields for Network SSID, Security, and Password.]
* Ensure the wired network is connected. The box can be used as a wireless AP to support more wireless devices in the family.
2.1.1 The Step that how to reflash the box
- Uncompress the downloaded firmware (ROM) to the root of the SD/TF card (format your card first).
- Insert the SD Card into the powered-off Box (power cable not plugged in) with no external USB storage attached.
- Using a toothpick, insert it into the AV port of the Box, press and hold the hidden button while plugging in the power. Do not release until you see the screen of the Robert Logo.
- The update will run automatically. When it is done, choose "Reboot". You can disregard any errors that display after the update; they are not relevant to your device.
- When the system has rebooted, you should first check to ensure Wi-Fi is working by going to Settings->Wi-Fi. Turn on the Wi-Fi if it's off, and you should be able to connect.
Product Declare
Legal notice:
Special reminder that this product is only for overseas use. The content installed should comply with the relevant local laws and regulations. In case of any violation of laws and regulations, the manufacturer does not bear the result.
Manufacturers promise:
The content of manufacturer preinstalls complies with local laws and regulations and does not involve illegal contents.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum 20cm distance between the radiator and your body. Use only the supplied antenna.
IC Caution:
English:
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)This device may not cause interference, and (2)This device must accept any interference, including interference that may cause undesired operation of the device. To maintain compliance with RSS-102 RF Exposure guidelines, this equipment should be installed and operated with a minimum 20cm distance between the radiator and your body. Use only the supplied antenna.
French:
Cet appareil est conforme aux normes RSS exemptées de licence d'innovation, sciences et développement économique Canada. L'exploitation est autorisée aux deux conditions suivantes: (1)l'appareil ne doit pas produire de brouillage, et (2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Pour être conforme aux lignes directrices d'exposition RF RSS-102, cet équipement doit être installé et exploité à une distance minimale de 20cm entre le radiateur et votre corps. N'utilisez que l'antenne fournie.
