Avantree AS90C Use Guide

Add a 2nd Pair of Headphones to Opera

Make sure that the Opera (transmitter and headphones) have connected. The LED indicator on the headphone will turn SOLID BLUE. Follow the below steps to add the 2nd headphone:

1. Enter the transmitter (dock) into PAIRING MODE manually – Slide & hold the Mode switch at “PAIR” position until the Indicator starts flashing [red and blue indicator].

2. Enter the 2nd pair of AS90C headphones into Bluetooth PAIRING MODE – Slide the power switch on the Headphone to “ON” to turn it on. Next, slide & hold the power switch at “PAIR” until the Indicator starts flashing [red and blue indicator]; you'll hear “Pairing” in the headphones.

   Keep the devices close to each other and wait. Once connected, the LED indicators on the transmitter and the two headphones will all turn [solid blue indicator].

3. RECONNECT: For your next use, please turn the original Opera Headphone on first; once it's connected, you may turn on the second pair of AS90C headphones and click the [reconnect button] once to reconnect.

For more detailed instructions, please visit support.avantree.com.

Any questions? Contact:

Support@avantree.com (Response Time: 1 working day)

Self-service Support:

• More FAQs on support.avantree.com
• 100+ Step by step video Guide – youtube.com/avantree/playlists

Telephone Support (Mon-Fri):

• USA / CANADA: +1 800 232 2078 (EN, PST 9am-5pm)
• EU / Asia telephone No. refer to www.avantree.com/contact-us