EcoFlow GLACIER Classic

About this manual

This user manual applies to the GLACIER Classic 35L, 45L, and 55L models. The terms “GLACIER Classic” in this manual refer to products in the EcoFlow GLACIER series.

Please note that this manual may be updated without prior notice. If you are reading this manual in PDF format, please note that you can access it online at EcoFlow Support for a better experience and the latest updates.

Illustrations in this manual are for demonstration purposes only. Please refer to the actual product received.

The availability of certain accessories and features described in this manual may vary depending on your country or region.

General Overview

Appearance

The refrigerator is equipped with two handles for transport. At least two people are required for transport. Do not use the lid latch to move the refrigerator.

Ideal Location

To reduce energy consumption and ensure the correct operation of the refrigerator, its placement must meet the following conditions:

• The location must be clean, dry, and not exposed to rain.
• There should be adequate ventilation, with a space of at least 50 mm on all four sides of the refrigerator.
• The surface must be stable and level, with an inclination of less than 30° to avoid triggering the anti-tip protection due to prolonged inclination.
• Placement must meet temperature requirements, avoid direct sunlight, and keep the refrigerator away from heat sources and flames.
• Avoid placing the refrigerator in areas with high levels of gas or smoke, as this may cause surface discoloration.
• It is not recommended to place the refrigerator on a carpet, as the carpet may absorb condensation and lead to mold.

Starting Up

Connecting Power

From a Wall Outlet

Connect the refrigerator's input port to a wall outlet using the included AC power adapter. Use a dedicated outlet and do not use it with other appliances.

From a Connected Battery

The refrigerator is powered by the EcoFlow GLACIER Plug-in Battery (hereinafter referred to as “plug-in battery”).

Install the Plug-in Battery

Note: Before installing the battery, please read the battery user manual carefully.

1. Open the battery compartment cover of the refrigerator.
2. With the side of the battery containing the interface and button facing outwards (the button should be in the top right corner), insert the battery into the compartment.
3. When the battery icon appears on the refrigerator display, it indicates that the battery has been successfully connected.

Note: After connecting the battery, if the refrigerator's input port is powered, this energy will be used primarily for cooling. Any surplus energy will charge the battery.

Remove the Plug-in Battery

1. Open the refrigerator's battery compartment cover.
2. Press the battery release button.
3. Remove the battery.
4. Close the refrigerator's battery compartment cover.

From Solar

With the battery connected, use an EcoFlow Solar to XT60i charging cable to connect the solar panel to the refrigerator's input port to utilize solar energy.

Note: The EcoFlow solar to XT60i charging cable and solar panel are not included in the package. When using solar energy, the battery must remain connected; otherwise, the refrigerator will not function correctly. Before connecting the solar panel, please ensure that its output voltage is within 30V to avoid damaging the refrigerator.

From a Cigarette Lighter Socket

Connection: Connect the refrigerator's input port to the vehicle's cigarette lighter using the included car charging cable.

Car Battery Protection

The refrigerator has a car battery protection function to prevent excessive discharge of the car battery. This function has three levels: “Low”, “Medium”, and “High”. At the “High” level, the protection is strongest, while at the “Low” level, the refrigerator consumes more energy from the car battery.

You can enable or disable the vehicle battery protection function and adjust its level through the EcoFlow app.

Note: The car battery protection function is set to “Medium” by default. To prevent ignition failure, it is recommended to set the car battery protection to “Medium” or “High”.

The three protection levels correspond to different cutoff and operating voltages.

When the refrigerator is not connected to a plug-in battery, if the car battery voltage drops below the cutoff voltage, the refrigerator will automatically shut down. Once the car battery voltage returns to the operating voltage level, the refrigerator will resume operation as it was before the protection was triggered.

When the refrigerator is connected to a plug-in battery, if the car battery voltage drops below the cutoff voltage, the refrigerator will switch to battery power and will not shut down automatically.

Note: When powering the refrigerator using the cigarette lighter socket of a power station or a solar panel, if the power source does not function correctly, disable the car battery protection function via the EcoFlow app and try again.

Open the Lid

The refrigerator is equipped with two lid latches and allows opening on both sides. Press both lid latches simultaneously and lift the lid upwards to remove it.

Note: When repositioning the lid, ensure it is oriented correctly.

Power On/Off

• Power On/Off: Press and hold the power button for approximately 2 seconds.
• Display Off: When the refrigerator is on, briefly press the power button to turn off the display.
• Activate Display: Press any button to activate the display with the refrigerator on.

Note:

• If no battery is connected, the refrigerator will turn on automatically when connected to any power source.
• When a battery is connected, if the refrigerator is connected to any power source and the last shutdown was manual, the refrigerator will not turn on automatically. However, if the refrigerator was turned off abnormally last time, it will turn on automatically.

Set Temperature

Single Zone Setting

Adjust Temperature

After the refrigerator is turned on, the display will show the real-time temperature of the temperature zone. Press the adjustment button once to enter the temperature settings, and the temperature digits will start flashing. Press the adjustment button again to adjust the temperature. Press and hold the adjustment button for quick adjustments.

If no operation is performed within 3 seconds after adjustment, the settings will be applied automatically. Alternatively, you can press the power button once to finalize the settings immediately without waiting.

Tip: The cooling capacity range is from -20°C to 20°C.

Temperature Unit Switch

The refrigerator supports both Celsius and Fahrenheit temperature units. To switch between them, press and hold the up and down adjustment buttons simultaneously for 2 seconds.

Dual Zone Setting

Notification: Only 45L and 55L models support dual-zone settings.

Install Temperature Zone Separator

The 45L and 55L refrigerators come standard with a temperature zone separator. When the separator is not installed, the refrigerator operates in single-zone mode. After installing the separator, the refrigerator switches to dual-zone mode.

How to Install

1. Push the separator latch outwards to remove the temperature zone separator from the bottom of the refrigerator lid.
2. Insert the separator along the placement grooves and into the cabinet.
3. Once the separator is in place, the refrigerator will enter the dual-zone state.

After installing the temperature zone separator, the smaller volume zone will be the left zone, and the larger volume zone, closer to the display, will be the right zone.

Note: When not in use, the temperature zone separator can be stored in the bottom of the refrigerator lid.

Adjusting Temperature

After the refrigerator is turned on, the display will show the real-time temperature of the temperature zones. Press the adjustment button once to enter the temperature setting for the left zone, and the zone's temperature digits will start flashing. Press the adjustment button again to adjust the temperature. Press and hold the adjustment button for quick adjustments.

When adjusting the temperature, press the setting button once to switch between zones.

If no operation is performed within 3 seconds after adjustment, the settings will be applied automatically. Alternatively, you can press the power button once to finalize the settings immediately without waiting.

Note:

• The cooling capacity range is from -20°C to 20°C.
• The temperature difference between the two zones can be up to 22°C.

Temperature Unit Switch

The refrigerator supports both Celsius and Fahrenheit temperature units. To switch between them, press and hold the up and down adjustment buttons simultaneously for 2 seconds.

Recommended Setting Temperature for Common Foods

Note: Recommended temperatures are for reference only.

Switch Mode

Press the setting button once to switch the refrigerator's operating mode. The refrigerator offers two operating modes: Eco Mode and Max Mode.

• Eco Mode: The refrigerator consumes less energy, extending operating time.
• Max Mode: Temperature control is faster and more precise, although energy consumption is higher.

Child Lock

Activate/Deactivate Child Lock Function:

Press and hold the setting button for 2 seconds. The refrigerator has a child lock function. When activated, all buttons on the control panel (including the power button) will be deactivated to prevent accidental operation.

Management

Download the EcoFlow App

EcoFlow offers a companion app for managing devices. With this mobile app, you can:

• Enjoy full control over your EcoFlow devices from anywhere.
• Monitor energy consumption details effortlessly with real-time updates.
• Personalize your energy ecosystem with a wide range of customizable options.
• Receive timely troubleshooting and firmware updates in the app.

Scan the QR code or download it from: https://download.ecoflow.com/app

Device Pairing and Internet Configuration

After successfully registering an EcoFlow account, pair your EcoFlow devices to your account to ensure remote access to the device settings.

To connect a new EcoFlow device:

1. Access the EcoFlow app and log in to your EcoFlow account.
2. Tap the “Add Device” button or the + icon in the top right corner to search for new EcoFlow devices.
3. Select the EcoFlow device and follow the instructions in the pop-up window to complete device pairing and Wi-Fi configuration.

Tip: Cannot detect this power station via Bluetooth? Try the following:

1. Power Off: Press and hold the power button for 2 seconds to turn off the refrigerator.
2. Reset Bluetooth: While the refrigerator is off, press and hold the power button for approximately 5 seconds to reset all Bluetooth and Wi-Fi connections.
3. Power On and Retry: Press the power button for 2 seconds to turn on the refrigerator and start the search again.

Phone Control

With the EcoFlow app, you can manage all EcoFlow-connected devices from your phone. The EcoFlow device supports Wi-Fi and Bluetooth connections, adapting to different network conditions to ensure convenient access to device settings.

With Internet

When the Wi-Fi connection is stable, you can access the device settings via the internet. This method is always recommended to ensure that the EcoFlow device can receive timely firmware updates and modifications.

Without Internet

If the Wi-Fi connection is limited, you can manage the EcoFlow device locally via Bluetooth.

Precautions for Food Storage

• Hot foods must be cooled before being placed in the refrigerator. Otherwise, the temperature in the refrigerator will rise, affecting the freshness of other foods and increasing the refrigerator's energy consumption.
• Do not open the refrigerator lid frequently. Otherwise, the temperature inside the refrigerator will rise. Do not store too many foods in the refrigerator. Otherwise, the refrigerator lid cannot be closed properly.
• Use food wrap or a plastic bag to seal the container or use a covered container to store food, which can prevent food moisture evaporation, preserve food flavor and nutrition, and reduce odor inside the refrigerator.
• When the set temperature is below 0°C, do not place glass bottles in the refrigerator to prevent the contents from freezing, which may cause the bottles to break and cause injury.
• When the set temperature is below 0°C, do not touch the inside of the refrigerator or metal containers with wet hands, as this may cause frostbite.
• In case of an unexpected power outage, avoid opening the refrigerator lid to maintain cooling performance. After the power is restored, check the contents of the refrigerator to ensure that the food has not spoiled.

Maintenance and Care

Cleaning

1. Before cleaning, turn off the refrigerator and disconnect it from all power sources to ensure safety.
2. Use only a soft cloth dampened with water or a mild, non-abrasive detergent to clean the inside and outside of the refrigerator. Before cleaning, ensure the cloth is not wet.
3. Do not rinse the refrigerator with running water or immerse it in water.
4. Ensure that the air intake and exhaust vents on the refrigerator are free of dust and dirt to maintain adequate ventilation.
5. After cleaning, ensure the refrigerator is completely dry and all ports and cables are free of any liquid before connecting it to a power source.

Note: When the ambient humidity is high, condensation may form on the surface of the refrigerator after it has been running for a period of time. Simply wipe it with a soft cloth.

Drainage

If water has accumulated inside the refrigerator, remove the drain plug from the bottom of the cabinet to empty it.

Defrosting

Moisture can form ice inside the refrigerator. This reduces cooling capacity. Follow the steps below for regular defrosting:

1. Remove all items from the refrigerator. If necessary, store them in another refrigerator to keep them cool.
2. Turn off the refrigerator by unplugging it.
3. Open the refrigerator lid and let the ice defrost naturally.
4. Remove the drain plug to drain the water, then use a soft cloth to remove any remaining water.

Note: Do not use mechanical devices or other methods not recommended by the manufacturer to speed up the defrosting process.

Storage

If the refrigerator will not be used for a long period of time, follow these steps:

1. Turn off the refrigerator and disconnect it from all power sources.
2. Defrost the refrigerator.
3. Clean and dry the refrigerator.
4. After the inside and outside are completely dry, close the refrigerator lid.

Safety Instructions and Regulatory Compliance

Disclaimer

Please read the product documentation carefully and ensure you understand it before using the product. Improper use may cause serious personal injury, product damage, or material loss. Always consult the latest documentation available at https://www.ecoflow.com/support/download. This documentation takes precedence over all other versions. By using this product, you acknowledge and agree to all terms and conditions mentioned in the documentation. EcoFlow is not responsible for losses caused by improper use or failure to follow the provided instructions.

Subject to applicable laws and regulations, EcoFlow reserves the right to finally interpret this document and all product-related documentation.

Safety Instructions

Environment

1. Store the product in a clean, dry, and well-ventilated place.
2. Do not expose the product to rain.
3. Do not use the product near a heat source, such as a fire or oven.

Operation

1. WARNING: Do not block the ventilation openings in the appliance housing or built-in structure.
2. Place the product on a stable and level surface. Avoid damaging the device or causing personal injury due to the product falling or tipping over.
3. When transporting the product, carry it horizontally and avoid tilting.
4. To prevent damage, do not allow water to enter the internal components of the product, such as ports and ventilation openings.
5. Do not subject this product to impacts, vibrations, or strong drops. In case of a strong impact, stop using this product immediately and turn off the power supply.
6. Do not disassemble, repair, or modify this product yourself. For any repair service, please contact EcoFlow Customer Service.
7. Always disconnect the product from all external power sources before attempting any service or maintenance.
8. Do not use unofficial or unrecommended components or accessories. For any replacement, please contact EcoFlow for further assistance.
9. Do not use this product with a damaged cable or plug.
10. Before turning on the product, ensure that both the power cable and plug are dry and correctly connected.
11. Please wait more than 10 seconds when disconnecting and reconnecting the plug. Otherwise, the product may malfunction.
12. To reduce the risk of damage to the plug and power cord, pull the plug, not the cord, when disconnecting the product.
13. Do not touch exposed wires with bare hands. This is especially true when using the product from the AC power outlet.
14. Disconnect the product from all external power sources after use or before cleaning.
15. When positioning the product, ensure that the power cord is not pinched or damaged.
16. Do not place multiple portable sockets or portable power sources behind the product.
17. Do not block the air intake or exhaust port during operation.
18. Do not insert wires or other metal objects into the air intake or exhaust port of the product.
19. Do not damage the refrigerant circuit.
20. WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
21. WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
22. WARNING: Do not store explosive substances, such as aerosols with flammable propellants, in this appliance.
23. The product is not suitable for transporting caustic materials or materials containing solvents.
24. Do not fill the inner container with liquid.
25. To avoid food contamination, please follow the instructions below:
• Check if the cooling capacity of the device is suitable for storing the food or medicine you want to cool.
• Store food in its original packaging or in suitable containers.
• Avoid opening the cooling device for long periods, as this may significantly increase the temperature inside the compartments.
• Regularly clean surfaces and drain holes that may come into contact with food.
26. Do not stack heavy objects on the product.
27. Before opening the refrigerator door, make sure that no objects are placed above the refrigerator to prevent them from falling.
28. Keep the product out of reach of children and pets. If the product is to be used near children, they should be supervised.
29. If the product is left empty for long periods: – Turn off the product and disconnect it from all power sources. – Defrost the product. Clean and dry the product. After the inside and outside are completely dry, close the refrigerator lid.
30. This appliance is intended for use in household and similar applications, such as: – Kitchen areas in shops, offices, and other work environments; – Farms and by clients in hotels, motels, and other residential-type environments; – Bed and breakfast-type environments; – Catering and similar non-retail applications; – Camping use: suitable for camping; the appliance should not be exposed to rain.

In case of emergency

1. Do not use the product if it is visibly damaged. Immediately turn off the product and disconnect all power sources.
2. In case of emergency, take precautions against electric shock before touching the product, such as wearing insulating gloves.
3. If you notice a strong odor, ventilate the area immediately, turn off the product, avoid using electrical appliances or open flames nearby, and contact EcoFlow customer support for assistance.
4. If the product or cables start to smoke or catch fire, immediately cut off the power supply and call the fire department. It is recommended to use a dry powder or carbon dioxide extinguisher to put out the fire.
5. In case of an unexpected power outage, try to avoid opening the refrigerator lid to maintain its cooling performance.

Recycling and Disposal

1. Remove the doors before discarding the product to prevent the risk of children getting trapped.
2. The product's insulation contains flammable cyclopentane and requires special disposal procedures. At the end of its life cycle, take the product to an appropriate recycling center.

Battery Usage

1. This product is only compatible with the EcoFlow GLACIER Plug-in Battery (Model: EFBX100-EB).
2. Do not use non-rechargeable batteries.
3. WARNING: To recharge the battery, use only the detachable power unit supplied with this appliance.
4. If the chemical substance inside the battery accidentally leaks, do not touch it or inhale it. After accidental contact with skin or eyes, wash with plenty of water and seek medical attention if necessary.
5. To dispose of the battery, follow the instructions below:
• When conditions permit, ensure the battery is fully discharged before placing it in the battery recycling bin. Batteries are hazardous chemicals and should not be disposed of in regular trash bins. For details, comply with local laws and regulations regarding battery recycling and disposal.
• If the battery cannot be fully discharged due to a battery malfunction, do not dispose of the battery directly in the battery recycling bin and contact a professional battery recycling company for further processing.
• If the battery cannot be turned on after discharge, dispose of it in accordance with local laws and regulations regarding battery recycling and disposal.

Bluetooth®

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by EcoFlow Inc. is under license. Other trademarks and trade names are those of their respective owners.

WEEE

This marking indicates that this product should not be disposed of with other household waste in the EU. Recycle this product properly to prevent possible harm to the environment or human health from uncontrolled waste disposal and to promote the sustainable reuse of material resources. Please return your used product to an appropriate collection point or contact the retailer from whom you purchased this product. Your retailer will accept used products and return them to an environmentally sound recycling facility. For information on the disposal of electrical and electronic equipment, please visit the following website: https://eu.ecoflow.com/pages/electronic-devices-disposal

Specifications

Conformity Declaration

EcoFlow Inc.

RM 401, Plant #1, Runheng Industrial Zone, Fuyuanyi Road, Zhancheng Community, Fuhai Street, Bao'an District, Shenzhen City, Guangdong Province, P.R.China

RO Declaration of Conformity

We, EcoFlow Inc., as the Manufacturer, declare under our sole responsibility that the products to which this declaration refers are in conformity with the following requirements:

EU Representative: EcoFlow Europe s.r.o.
Doubravice 110, 533 53 Pardubice, Czech Republic

Signed for and on behalf of:

Hemylee
Signature and stamp

Conformity engineer
position

2025-05-20
Date of issue

Compliance Warnings

Warnings: Fire Hazard/Flammable Materials

1. WARNING: The system contains high-pressure refrigerant. Do not modify the system. It must be repaired only by qualified personnel. Use only manufacturer-authorized spare parts. Any repair equipment used must be designed for flammable refrigerants. Follow all manufacturer repair instructions. Do not puncture the refrigerant tube.
2. DANGER – Fire or explosion hazard. Flammable refrigerant is used. Do not use mechanical devices to defrost the refrigerator. Do not puncture the refrigerant tube.
3. DANGER – Fire or explosion hazard. Flammable refrigerant is used. It must be repaired only by qualified service personnel. Use only manufacturer-authorized spare parts. Any repair equipment used must be designed for flammable refrigerants. Follow all manufacturer repair instructions. Do not puncture the refrigerant tube.
4. CAUTION – Fire or explosion hazard. Dispose of the refrigerator properly in accordance with applicable federal or local regulations. Flammable refrigerant is used.
5. CAUTION – Fire or explosion hazard due to puncture of the refrigerant tube; Follow handling instructions carefully. Flammable refrigerant is used.
6. Suitable for outdoor use.
7. WARNING: Fill with potable water only.
8. WARNING: Do not block the ventilation openings in the appliance housing or built-in structure.
9. WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
10. WARNING: Do not damage the refrigerant circuit.
11. WARNING: Do not use electrical appliances in the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
12. WARNING: When positioning the appliance, ensure that the power cord is not pinched or damaged.
13. WARNING: Do not place multiple portable sockets or portable power sources behind the appliance.
14. WARNING: Connect the appliance to the potable water mains only.
15. WARNING: To avoid danger caused by the instability of the appliance, it must be fixed according to the instructions.
16. WARNING: The refrigeration system is under high pressure. Do not modify it. Contact qualified service personnel before disposal.
17. CAUTION: To prevent a child from getting trapped, do not leave them unattended and not near the freezer (or refrigerator).
18. WARNING: Risk of child entrapment. Before discarding an old refrigerator or freezer: *Remove the doors. Leave the shelves in place so that children cannot easily climb inside.

Annex

What's in the Box

1. GLACIER Classic
2. Basket
3. Temperature Zone Separator (45L/55L only)
4. Car Charging Cable
5. AC Power Adapter
6. Product Documentation

If any item is damaged or missing, please contact EcoFlow Customer Service for assistance.