ScanAvenger Full Factory Reset for Wireless USB Dongle Connection

1. Unplug the USB Dongle.
2. Scan the barcodes below in order:
   • No need to print these codes, they can be scanned from the screen.
   • The scanner may not make sounds or vibrate while scanning certain codes; this is normal behavior.

Step 1

[Barcode: ScanAvenger]

Step 2

[QR Code]

%SpecCode93

Step 3

[QR Code]

%SpecCode79

Step 4

[QR Code]

%SpecCode77

Step 5

[QR Code]

%SpecCode35

Step 6

[QR Code]

%SpecCode95

Step 7

[QR Code]

%SpecCode7B

Step 8

[QR Code]

%SpecCode9C

Step 9

[QR Code]

Step 10

[QR Code]

Step 11

[QR Code]

%SpecCode92

Step 12

[QR Code]

%SpecCodeA8

Step 13

[QR Code]

%SpecCode99

3. Plug the Dongle back in.
4. Confirm connection:
   • Your scanner will pair with the dongle.
   • A solid blue light on the scanner confirms a successful connection.