Garrett PD 6500i PINPOINT DETECTION
Meets the world's highest test certifications
Garrett's PD 6500i is an industry leader with superior pinpoint technology and unmatched discrimination features. This detector has proven its effectiveness at moving high volumes of patrons through such events as the Olympic Games, World Cup 2010 South Africa, and the Pan-American Games in Mexico. The PD 6500i has also been trusted to safeguard international airports, hotels, government buildings, and correctional facilities. With its advanced networking and ability to pinpoint targets in 33 detection zones, the PD 6500i is the walk-through of choice for security professionals worldwide.
Meets certifications:
TSA (U.S. airports) DHS Safety ACT Certificate ECAC (European airports) STAC (French airports) Aena (Spanish airports) CJIAC (Japanese airports) DfT (U.K. airports)
Tamper-proof
All settings are secured with a key lock and two levels of access codes. Further security is accomplished with a cabinet lock that prevents unauthorized access to physical cables, connectors and electronics.
Easy assembly
The PD 6500i's modular design allows for a quick and simple assembly of its four (4) sub assemblies using only eight (8) screws and three (3) internal cable connections.
Digital Signal Processor (DSP) based technology
DSP provides greater sensitivity, noise immunity, discrimination, detection uniformity, and overall product reliability.
PD 6500i Advantage
Bilateral detection
This unique bilateral technology has transmitters and receivers in each side panel to allow scanning from both sides, resulting in uniform detection throughout the archway. It also provides superior noise cancellation resulting in easier setup (i.e. no need to rotate the unit to avoid interference from nearby equipment such as other metal detectors or x-ray machines).
Advanced broadband technology
Analyzes targets across a broad range of frequencies for greater accuracy. Provides superior ferrous and non-ferrous detection. Improved discrimination means fewer false alarms and higher throughput.
More accurate pinpointing
With more than four times the detection coils of competitive models, the PD 6500i provides uniform detection and precise pinpointing. Independent zone indicator lights on both side panels identify not only height but also left, center and right locations for one or more objects passing through the archway.
Optimum Performance
More than 20 standard program settings scientifically engineered to address the needs of airports, courthouses, prisons, schools, facilities, special events, mass transit, loss prevention, and other applications.
Superior versatility
Menu based settings for feature selection such as alarm indication, count method, and language without the use of a computer. Field programmable to allow system upgrades. Multiple units can be installed as close as 2 inches.
Directional counter
Four settings for counting patrons: forward only, reverse only, subtract in reverse, and bidirectional.
Pacing lights
Universal "wait" and "proceed" symbols at the detector entrance for traffic controls.
| Feature | Specification |
|---|---|
| Standard Programs | Over 20 application programs included |
| Sensitivity | Up to 200 distinct sensitivity levels |
| Optics | 3 Infrared |
| Zone Indications | 33 independent zones |
| Overhead Control Unit | All electronics-LCD, alarm light, LED bar graph, control touch pads- integrated to eliminate wire exposure. |
| Tamper-Proof Settings | Three access levels of security clearance |
| Self Diagnostic Program | Complete and automatic |
| Calibration | Automatic and manual calibration |
| Initialization Time | 1 second |
| Zone Sensitivity Boost | Adjustable in six areas |
| Maximum Pass-Through Speed | 15m/sec |
| Battery Pack (optional) | 10-hour (additional backup available upon request) |
| Warranty | 36 months, Limited Parts/Labor |
| Passageway Interior Size | Width 30" (0.76 m) Height 80" (2.03 m) Depth 23" (0.58 m) |
| Overall Exterior Size | Width 35" (0.90 m) Height 87" (2.21 m) Depth 23" (0.58 m) |
| Shipping Size | Width 35.5" (0.90 m) Height 91.5" (2.32 m) Depth 6.25" (.16 m) |
| Shipping Weight | 165 lbs. (74 kg) |
| Temperatures | Operating: -4° F (-20° C) to +149° F (65° C) Humidity to 95% non-condensing Storage: -22° F (-30° C) to 176° F (80° C) |
| Power | Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 45 watts; no rewiring, switching or adjustments needed. |
| Regulatory Information | Meets international airport standards such as TSA, ECAC, STAC, AENA, CJIAC, DFT. Meets additional standards and requirements such as USMS, NIJ-0601.02, NILECJ. Meets Electrical Safety and Compatibility Requirements for CE, FCC, CSA, IEC, ICNIRP, IEEE. |
| Weatherproofing | Meets IP 55, IP 65, IEC 529 Standard for moisture, foreign matter protection |
| Construction | Attractive scratch and mar-resistant laminate. Detection Heads and Support: heavy duty aluminum. Immunity to electrical interference, ambient noise and mechanical vibrations. |
| Control Outputs | Solid state switches (low voltage AC or DC) for operating external alarms and control devices. |
| Remote Control (optional) | Desktop Remote Control with Zone Indication and/or via network with iC Module. |
| Networking (optional) | Manage individual or groups of walkthroughs and perform statistical analysis of throughput with iC Module. |
PD 6500i Accessories
| Part No. | Model/Clearance | |
|---|---|---|
| 2225420 | Lithium battery module, 14AHr | IP55 |
| 1171200 | I/O Relay Module | IP65 |
| 1171600 | iC Module (Wirless & Wired) | IP55 |
| 1169500 | IR remote control | IP65 |
| 1171100 | Desktop Remote Control | |
| 1169101 | Caster system | |
| 1604101 | Adhesive floor mount kit | |
| 1169800 | Wireless Sync SM100 |
* Supplied with AUS/NZ plug.
** ADA-compliant passageway
GARRETT AUSTRALIA
Arundel Business Park, 2/8 Distribution Court
Arundel, Gold Coast, Queensland 4214
Tel: 07 5551-0344
Email: security@garrettaustralia.com.au
MADE IN THE USA
ADA COMPLIANT
1554400 REV P, EC-11092 May 2024 Garrett Electronics, Inc.
