Shan Wan Q41 Wireless Mobile Game Controller
Model: Q41
Connecting to Consoles (P3, P4, P5)
First Connection: Connect the controller to the P3, P4, or P5 console using the Type-C USB cable. Press the button to initiate pairing. The LED will remain lit when the connection is successful.
Subsequent Connections: Press the button directly to connect automatically.
Note: If you previously connected to a different device, you must repeat the first connection step.
Function Buttons Guide
- A: Left joystick/L3 Button
- B: D-pad Button
- C: DX/Y/B/A Button
- D: Power switch
- E: LED Indicator
- F: SHARE Button
- G: OPTIONS Button
- H: Start Button
- I: Headphone jack (3.5mm)
- J: KR1/R2 Button
- K: MNL1/L2 Button
- L: PM2/M1 Button
- M: USB interface
- N: Right joystick/R3 Button
Electrical Parameters
- Working voltage: DC3.7V
- Working current: < 60mA
- Sleep current: < 5uA
- Charging voltage/current: DC5V/500mA
- Bluetooth transmission distance: <= 8M
- Battery capacity: 600mAh
- Standby time: 30 days (fully charged)
- Working time: > 8H
Compatible Machines
- P3, P4, P4 Slim, P4 Pro, P5 Console
- Smartphones with iOS (13.0 and later) and Android (10.0 and later)
- Steam
Installing the Mobile Phone Holder
- Install the phone holder onto the controller.
- Pull up the phone holder.
- Place your phone into the holder. Ensure the controller is horizontal and the phone's camera is on the left.
Connecting to Mobile Phones via Bluetooth
iOS:
- Hold the SHARE button and press the button for 2 seconds. The LED will flash green.
- Go to Settings > Bluetooth and search for "DUALSHOCK 4 Wireless Controller". Connect to it.
Android:
- Hold the SHARE button and press the button for 2 seconds. The LED will flash green.
- Go to Bluetooth settings and search for "Wireless Controller". Connect to it.
After successful connection, the LED will remain lit.
Note: Scan the QR code to download the ShanWan Controller APP for a list of compatible games.
Connecting to PC
Connect the controller to the PC using the Type-C USB cable. The controller will be identified as an X-input device. The LED will remain lit upon successful connection.
M1/M2 Button Functionality
The M1 and M2 buttons can be mapped to A/B/X/Y/R1/R2/L1/L2 buttons.
To map a button (e.g., A to M1):
- Press A + OPTIONS buttons simultaneously. The LED will flash.
- Press the M1 button within one minute. The LED will stay lit, indicating successful mapping.
To unmap the M1 button: Press M1 + OPTIONS buttons simultaneously.
Default mapping: M1 is L2, M2 is R2.
Controller Charging, Sleep, and Wake-up Functions
Charging: The LED will flash when the battery is low and remain lit when fully charged. Connect a 5V charger using the provided Type-C USB cable.
Turning Off: Press and hold the button for 5 seconds to turn off the controller. The LED indicators will extinguish.
Sleep Function: Without a Bluetooth connection, the controller will automatically turn off after 1 minute.
Wake-up Function: Press the button to reconnect when you need to use the controller again.
Notice
- Do not store in wet or high-temperature environments.
- Avoid dropping the controller to prevent damage.
- Dispose of the product responsibly, as it contains a built-in battery.
- Keep away from fire and high temperatures during charging.
What's in the Box?
- Wireless Gamepad (X1)
- User Guide (X1)
- Detachable mobile device holder (X1)
- Type-C USB Cable (X1)
Q & A
- Q: Phone cannot find the controller?
A: Forget previously connected device names and reconnect by pressing the button for 2 seconds. - Q: Controller won't power on?
A: The battery may be depleted. Charge the controller using the provided Type-C USB cable and a 5V charger until fully charged. - Q: Joystick drift?
A: With the controller turned off, press and hold the joystick vertically and rotate it 5 turns left and right. - Q: How to turn off the controller?
A: Press and hold the button for 5 seconds. - Q: Cannot reconnect by pressing the power button?
A: Forget the device name and reconnect. - Q: Controller doesn't connect to phone?
A: Power off the controller and then press the button repeatedly to power it up. - Q: Buttons not working?
A: Power off the controller and then press the button repeatedly to power it up. - Q: Bluetooth connection keeps dropping?
A: 1) Reboot by long-pressing the power button. 2) If step 1 fails, use a small pin to press the reset hole next to the charging port, then press and hold the power button to turn it on. - Q: LED indicator stays on but cannot connect to mobile phone?
A: Check if the controller is connected to another mobile phone. Turn off the connected device and restart the connection process.
Product Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
FCC ID: 2A3VP-Q41
