Signature Design by Ashley T789-2 Replacement Parts List
Model: T789-2
This document provides a detailed description of replacement parts for the Signature Design by Ashley T789-2 model.
Parts Description
| Part # | Description | Used On | MRP# | Material | QTY. | FACTORY USE ONLY!! | |
|---|---|---|---|---|---|---|---|
| PACK | P/M | ||||||
| 1 | Leg #1 (w/Bracket) (L=536mm) | T789-2 | R75865 | Wood | 2 | F | M |
| 2 | Leg #2 (w/Bracket) (L=536mm) | T789-2 | R75866 | Wood | 2 | F | M |
| 3 | Side Stretcher (L=498mm) | T789-2 | R75867 | Wood | 2 | F | M |
| 4 | Center Stretcher (L=390mm) | T789-2 | R75868 | Wood | 1 | F | M |
| 5 | Insert (1/4in x 25mm) | T789-2 | R04580 | Metal | 8 | G | P |
| 6 | Insert (5/16in x 25mm) | T789-2 | R07124 | Metal | 6 | G | P |
| 7 | Hardware Pack | T789-2 | R75869 | 1 | G | P | |
Contents of Hardware Pack (Part #7):
- 1/4in x 40mm Allen Bolt (8)
- 5/16in x 80mm Bolt (6)
- 1/4in Flat Washer (8)
- 1/4in Lock Washer (8)
- 1/4in Nut (6)
- Half Moon Washer (6)
- 4mm Allen Wrench (1)
- 87x24mm Wrench (1)
Product Visual Description
The primary visual shows an end table with a marble-effect top and a wooden base constructed with legs and stretchers. Callouts indicate specific parts:
- Callout 1: Indicates the main legs of the table.
- Callout 2: Points to the side stretchers connecting the legs.
- Callout 3: Identifies a lower stretcher on the left side of the table base.
- Callout 4: Identifies a lower stretcher on the right side of the table base.
- Callout 5: Highlights a small, threaded metal insert component.
- Callout 6: Highlights a slightly larger, threaded metal insert component.
- Callout 7: Points to the packaged hardware kit.
Additional visuals show:
- Two distinct sizes of threaded metal inserts (corresponding to callouts 5 and 6).
- A packaged hardware kit labeled "T789-2 HARDWARE KIT", containing various fasteners, washers, and wrenches.
