B2 Audio RAGE 6 / RAGE 8 Owner's Manual
AUDIOPHILE ACOUSTICS
SWEET LIKE DANISH
Product Identification
Model: RAGE 6
Product ID: RAGE6D220
Model: RAGE 8
Product ID: RAGE8W20
Website: www.b2audio.com
Social Media: www.facebook.com/b2audio
CE Certification: CE
Specifications
| Model | RAGE6D2 | RAGE8D2 | RAGE8D4 |
|---|---|---|---|
| Sensitivity: | 86.2 dB | 84.1 dB | 82.2 dB |
| Nominal Impedance: | Dual 2 Ω | Dual 2 Ω | Dual 4 Ω |
| DC Resistance (DC): | 1.9 Ω | 1.9 Ω | 3.2 Ω |
| Voice Coil Dim: | 2" | 2" | 2" |
| Power Handling*: | 350 Watts | 500 Watts | 500 Watts |
| Peak Dynamic Power: | 700 Watts | 1000 Watts | 1000 Watts |
| XMAX one way (mm): | 15 | 15 | 15 |
| VAS: | 3.7 L | 5.8 L | 5 L |
| FS: | 44.1 Hz | 38.7 Hz | 40.9 Hz |
| QES: | 0.53 | 0.52 | 0.56 |
| QMS: | 6.17 | 6.09 | 5.64 |
| QTS: | 0.488 | 0.479 | 0.5 |
| CMS: | 120 um/N | 110 um/N | 110 um/N |
| MMS: | 102.5 g | 145 g | 129.7 g |
| BL^2/RE: | 54.7 | 69.2 | 61.3 |
| Magnet: | 140 Oz | 175 Oz | 175 Oz |
| Displacement: | 1.6 L/.056 cu.ft | 2.5 L/.088 cu.ft | 2.5 L/.088 cu.ft |
Enclosure Suggestions
| TYPE | SEALED | PORTED COMPACT | PORTED | BP 4TH |
|---|---|---|---|---|
| RAGE6D2 | 5 L / .178 cu.ft Qtc 0.405 |
12 L / .42 cu.ft P: 2" L: 9.43" / 24 cm FB: 42 Hz |
18 L / .636 cu.ft P: 3" L: 14.17" / 36 cm FB: 42 Hz |
3:1 Ratio |
| RAGE8D2 | 7.6 L / .269 cu.ft Qtc 0.48 |
15 L / 0.53 cu.ft P: 2" L: 7.16" / 18.2 cm FB: 42 Hz |
28 L / 0.989 cu.ft P.A. 7.75 sq.in L: 13.34" / 33.9 cm FB: 38 Hz |
3:1 Ratio |
| RAGE8D4 | 7.6 L / .269 cu.ft Qtc 0.513 |
15 L / 0.53 cu.ft P: 2" L: 7.16" / 18.2 cm FB: 42 Hz |
28 L / 0.989 cu.ft P.A. 7.75 sq.in L: 13.34" / 33.9 cm FB: 38 Hz |
3:1 Ratio |
Important Usage Notes
* It's essential that speakers are given time to allow the suspension to soften up. Depending on use, this may take several weeks. While this process is undergoing, it is not recommended to apply full amplification power according to the speaker's specs. Once the moving parts have been broken in, the performance of your speaker will increase. Abuse of the unit is not covered by warranty.
The warranty does not cover:
- (1) Speakers that have been used for SPL purpose in competitions.
- (2) Damage caused by amplifier clipping or distortion.
- (3) Exposure to water, oil, solvent & excessive temperatures +/-.
- (5) Cost of shipping to/from authorized service center.
B2 audio - ITCANNEVERB2LOUD
