Tomzon A24 User Manual

Catalog

This document is available in multiple languages:

• English: User Manual (Pages 01-12)
• German: Benutzerhandbuch (Pages 13-24)
• French: Manuel d'utilisation (Pages 25-36)
• Italian: Manuale d'uso (Pages 37-48)
• Spanish: Manual del usuario (Pages 49-60)
• Japanese: 取扱説明書 (Pages 61-72)

Pack List

Your Tomzon A24 drone package includes:

• Drone
• Remote Control
• Battery
• Propeller (A / B)
• USB Charging Cable
• User Manual

Safety Reminder

1. Do not use drones within a 5,000m radius of airfields or their center points to ensure electromagnetic environment requirements for aviation radio. Adhere to state authority instructions regarding radio control models and drones.
2. Fly indoors or outdoors in warm, sunny, and windless conditions. Avoid high temperatures, low temperatures, strong winds, thunderstorms, and heavy rain.
3. Maintain a safe distance from people, pets, wires, and other obstacles. Keep the drone within your line of sight to prevent accidents.
4. Once the drone is started, do not touch high-speed gears or propellers to avoid injury.

Product Description

Drone

The drone features:

• Forward Motor (Corresponds to Propeller A)
• Indicator Light
• Tilt Motor (Corresponds to Propeller B)
• Propeller A
• Propeller B
• Power Switch
• Battery

Tips for Propellers: The drone has two types of propellers, marked 'A' and 'B'. Ensure you match the correct propeller ('A' or 'B') when replacing them.

Remote Control

The remote control includes:

• Calibrate Button
• Power Button
• Left Joystick
• One-button Takeoff/Landing
• Speed Switch
• Emergency Stop Button
• Headless Mode Button
• 360° Rotation Button
• Battle Mode Button
• Right Joystick
• WASD Fine-tuning Buttons
• Orbit Flight Button

Control Modes: The drone supports two control modes:

• Mode 1: Left joystick controls ascent/descent and rotation; right joystick controls forward/backward and left/right flight.
• Mode 2: Left joystick controls forward/backward flight and rotation; right joystick controls ascent/descent and left/right flight.

Note: Mode 1 is the default. To switch to Mode 2, press the 'Set speed' button while turning on the remote control.

Battery

Battery Installation and Charging

1. Insert the battery into the drone and secure it as shown in the diagram.
2. Recharge the battery using the provided USB charger. The indicator light is red during charging and turns off when charging is complete.

Note:

• Use only the original charger.
• Keep the battery away from high temperatures, open flames, or electric heaters to prevent damage or explosion.
• If the product is stored for extended periods, charge the battery every two months to maintain its condition.
• Do not charge the battery on carpets or flammable materials to avoid fire hazards.

Battery Installation of Remote Control

Open the battery cover of the remote control and install 3 AAA batteries (not included). Ensure batteries are fully charged before flying, as low battery levels may prevent takeoff.

Tips:

• Ensure both drone and remote control batteries are fully charged before flight.
• Avoid mixing alkaline and dry cell batteries. Remove batteries if the drone is stored for a long time.

Quick Start

Frequency Match

1. Press and hold the power button on the drone's upper cover to turn it on. The indicator light will flash. Place the drone on a level surface.
2. Turn on the remote control. It will automatically pair with the drone. Successful pairing is indicated by a beep from the remote control and continuously lit indicator lights on both the remote and the drone.

Calibration

Press the [calibrate button] to start calibration. The indicator light flashes rapidly during calibration and remains steadily lit upon completion. If the drone crashes, recalibrate it on a horizontal surface.

Takeoff and Landing

Method 1: Press the [one button takeoff / landing] button to take off. Press the same button again to land.

Method 2: Push both joysticks inwards and downwards simultaneously to unlock the drone. Then, push the left joystick upwards to take off. To land, push the left joystick downwards after takeoff.

Emergency Stop

In an emergency, press and hold the [STOP button] for 1 second to stop the drone, causing it to fall. Use this function only in emergencies to minimize damage or injury.

Flight

High Speed and Rotation

Use the left joystick to control the drone's height and rotation during flight.

Front / Rear, Left / Right

Use the right joystick to control the drone's forward, backward, left, and right movements.

Headless Mode

In Headless Mode, the drone's flight direction is fixed and does not change with the drone's orientation. To switch to Headless Mode, press the [headless mode button].

Fine-tuning

If the drone drifts after takeoff, press the fine-tuning button in the opposite direction of the drift to stabilize it.

Aerobatic Flight (3D Rotation)

Step 1: Press the [rotate button] to activate the flip mode. The remote control will beep continuously.

Step 2: Push the right joystick forward to perform a 360° forward flip.

Tips: To rotate in a different direction, push the right joystick in that direction in Step 2.

Rotation Mode

Short press the [rotation button] to enable/disable rotation mode. The remote control will emit a 'tick' sound. In this mode, the drone rotates at a fixed speed.

Orbit Flight Mode

Short press the [orbit flight button] to enable/disable orbit flight mode. The remote control will beep once. In this mode, the drone flies in a circular orbit.

Tips:

• In this mode, only ascent and descent can be controlled.
• The drone will automatically exit this mode when the right joystick is moved.

Battle Mode

Press the [battle mode button] on the remote control. The drone emits infrared waves, allowing it to engage in aerial combat with one or more other drones. If the drone is hit, it will shake, its lights will flash, and the remote control will beep. After 4 hits, it will land slowly. Recalibrate before the next takeoff.

Throw Mode

The drone supports automatic induction takeoff after being manually thrown. Connect the drone to the remote control, calibrate it, hold the drone, and toss it into the air.

Safety

Low Battery Alarm

When the voltage drops below 3.7V, the drone's indicator light flashes red slowly, and the remote control beeps. The drone will land automatically when the battery is depleted. Monitor battery power during flight.

Low Signal Alarm

If the drone loses connection with the remote control, it will land automatically, and the remote control will beep. Ensure the drone remains within your line of sight.

Specifications

Drone

• Takeoff Weight: 30g
• Working Frequency: 2.4G
• Max. Remote Control Distance: 30M
• Battery: 3.7V 390mAh
• Working Temperature: 0-40°C

Remote Control

• Working Frequency: 2.4G
• Battery of Remote Control: 3*AAA batteries (not included)