Tomzon A23 User Manual

Packing List

The package includes:

• Drone
• Remote Control
• Battery
• Propeller (A / B)
• USB Charging Cable
• User Manual

Safety Precautions

1. To ensure electromagnetic environmental requirements for the aeronautical station, do not use any type of drone within 5000m and the center point of the airport runway. During periods when competent state departments issue radio control instructions, stop all types of remote controls and drones as needed.
2. Please fly indoors or outdoors in warm, sunny, and windless weather. Flying in adverse weather conditions such as overheating, excessive cooling, strong winds, and heavy rain is strictly prohibited.
3. To avoid accidents, please fly indoors or outdoors in open air. Maintain a safe distance from obstacles such as people, pets, cables, etc., and the drone must not leave the line of sight.
4. After starting the drone, do not touch the high-speed rotating gears, propellers, and other parts of the drone to avoid the risk of entanglement.

Product Description

Drone

The drone features:

• Front Motor (corresponding to propeller A)
• Indicator Light
• Reverse Motor (corresponding to propeller B)
• Power Switch
• Battery
• Propeller A
• Propeller B

Attention: Drones have two types of propellers ("A" and "B"). The markings A and B are printed on the propeller. When replacing propellers, please match them according to the corresponding "A" or "B" designation.

Remote Control

The remote control includes:

• Left Control Stick
• One-button Takeoff/Landing
• Speed Adjustment
• Emergency Stop
• Headless Mode
• 360° Flip
• Rotation Control
• Right Control Stick
• Calibration
• Power Supply
• Front, Rear, Left, and Right Adjustment
• Light On/Off
• Orbit Flight

Suggestion: The drone supports two control modes, Mode 1 and Mode 2.

• Mode 1: The left stick controls the drone's up/down rotation and left/right turns; the right stick controls forward/backward and left/right flight.
• Mode 2: The left stick controls forward/backward and left/right steering; the right stick controls the drone's up/down and left/right flight.

Attention: The default setting is Mode 1. To switch to Mode 2, press the "Speed Adjustment" button and turn on the remote control simultaneously. The following instructions use Mode 1 as an example for controlling the drone.

Battery

Drone Battery Installation and Charging

1. As shown in the image, insert the battery into the drone and secure it.
2. Charge the battery as shown. During charging, the USB charger's red light is on. When charging is complete, the charging indicator light turns off.

Attention:

1. Use the original charger to charge the battery. Other chargers cannot be used.
2. Do not place the battery in high temperatures, such as open flames or electric heating devices, as it may be damaged or explode.
3. If the product has not been used for a long time, please charge it every 2 months to keep the battery active.
4. Please do not charge on carpets or other flammable objects to avoid fire.

Remote Control Battery Installation

As shown in the figure, open the battery cover of the remote control and insert 3 AAA batteries (not included, you need to provide them yourself).

Suggestion:

1. Before flying, ensure that the drone's batteries and the remote control components are fully charged. The drone will not be able to take off in low power mode.
2. It is not recommended to mix acidic and alkaline batteries. If they are not used for a long time, it is recommended to remove and store them.

Quick Start

Frequency Matching

1. Press and hold the power button on the top cover to turn on the drone, and the drone's indicator light will flash. Then place it on a flat surface.
2. Turn on the remote control; it will automatically pair with the drone. After the remote control emits a beep, it means the pairing is successful. At this time, the indicator lights of the remote control and the drone will be constantly on.

Calibration

Press the [calibration button] to start the drone's calibration. During the calibration process, the drone's indicator light flashes rapidly, and the light stays on when calibration is complete. If the drone malfunctions, please recalibrate it (the drone should be on a flat surface during calibration).

Takeoff and Landing

Method 1

As shown in the figure, press the [one-touch takeoff/landing button] to take off (click this button after takeoff to land).

Method 2

As shown in the image, rotate both control sticks simultaneously to unlock the drone, then push the left stick upwards to take off (after takeoff, push the left stick downwards to land).

Emergency Stop

In case of emergency, press and hold the "STOP" button for 1 second. The drone will stop functioning and crash.

Suggestion: In case of emergency, press and hold the "STOP" button for 1 second, the drone will stop functioning and fall.

Flight

Note: Remote control Mode 1 is a flight instance.

Altitude and Rotation

During flight, use the "left stick" to control altitude and rotation.

Forward and Backward Direction, Left and Right Direction

Use the "right stick" to control forward, backward, left, and right flight.

Headless Mode

Headless mode means that when the drone is in flight, the direction of movement is fixed and does not change with the drone's direction, as shown in the figure.

Suggestion: The default setting is normal mode upon power-on. To switch to headless mode, press the [headless mode button].

Adjustment

If the drone deviates in a certain direction after takeoff instead of reaching a relatively stable state, it is necessary to press the trim button for the opposite current flight direction to achieve a stable state.

Acrobatic Flight

3D Flip

1. Step 1: Press the [flip button] to activate flip mode, and the remote control will emit a continuous beep.
2. Step 2: Push the right stick forward, and the drone will immediately flip forward by 360°.

Suggestion: If you want to flip in another direction, push the right stick in the other direction in Step 2.

Rotation Mode

As shown in the image, briefly press the [rotation button] to enter/exit rotation mode. At this moment, the remote control will emit a beep. In this mode, the drone will rotate at a certain speed.

Orbit Flight Mode

As shown in the image, briefly press the [orbit flight button] to enter/exit orbit flight mode. In this mode, the drone will start to circle along a circular orbit.

Suggestion:

1. In this mode, you can only control the drone's ascent and descent.
2. When you push the right stick, the drone will automatically exit this mode.

Launch the Drone for Flight

The drone supports automatic induction takeoff after being manually launched. Connect the remote control and calibrate it, then hold the drone in hand and launch it into the air, as shown in the figure.

Safety

Low Battery Alarm

When the drone's battery voltage is lower than 3.5V, the drone's indicator light turns into a red light and flashes slowly, and the remote control emits a beep. After the battery is depleted, the drone will land automatically. Please pay attention to the power level during flight.

Low Signal Alarm

If the drone loses connection with the remote control, the drone will land automatically, and the remote control will emit a beep. Do not fly out of sight.

Specifications

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Product Information

• Model: A23
• Manufacturer: Shenzhen Deepsea Excellence Technology Co., Ltd.
• Address: 5th Floor, Building 7, Hongfa High-tech Park, Keji 4th Road, Shiyan Street, Baoan District, Shenzhen
• Battery Information: 3.85V 380mAh
• Charging voltage/current: 5V=1A
• FCC ID: 2AYUO-A21
• EC REP: E-CrossStu GmbH. Mainzer Landstr.69, 60329 Frankfurt am Main
• UK REP: DST Co., Ltd. Fifth Floor 3 Gower Street, London, WC1E 6HA, UK

CAUTION

This toy is recommended for children 14 years of age and older. To ensure that the child's play is both safe and fun, please read the operating instruction and the general safety rules with your child.

• Keep eyes, face, fingers and hair away from the rotor blade, tail blade and gear, as they will rotate at very high speed while the aircraft is flying.
• Adult supervision is recommended when the aircraft is being operated.

WARNING

Warning: The product should only be used by adults and children over 14 years. Adult supervision is required for children under 14 years.

Hinweis: Dieses Produkt ist für die Erwachsene und die Kinder ab 14 Jahren. Die Kinder unter 14 Jahren müssen von Erwachsenen beaufsichtigt werden.

Avertissement: Ce produit est destiné aux adultes et aux enfants de plus de 14 ans. Les enfants de moins de 14 ans doivent être surveillés par des adultes.

Avvertimento: questo prodotto è destinato all'uso per i adulti e bambini di età superiore ai 14 anni. I bambini di età inferiore ai 14 anni devono essere sorvegliati da un adulto.

Advertencia: Este producto es para adultos y niños mayores de 14 años. Los niños menores de 14 años deben ser supervisados por adultos.

警告:この製品は、大人と14歳以上の子供には使用対象です。14歳未満の子供は大人 の監視が必要です。

[Age 0+] [CE] [UKCA] [Made in China]