Plano Modular Luminaire

Product Overview

The Airam Plano is a modular luminaire designed for efficient lighting. It features DALI-2 control and is rated IP20 with a power factor (PF) of 0.9. The luminaire is CE certified.

Key Specifications:

• Model: Plano
• Type: Modular Luminaire
• IP Rating: IP20
• Control: DALI-2, Push-button control (230V)
• Power Factor: PF ≥ 0.9
• Energy Efficiency Class: E
• Voltage: 220-240V~

Dimensions and Technical Details

Main Dimensions:

• Width: 595 mm
• Height: 595 mm
• Depth: 32 mm

Wiring Specifications:

• Recommended wire sizes: 1.5/2.5 mm² for general connections.
• Maximum wire size for DIM connections: 1.5 mm².

Mounting:

• Required mounting hole diameter: 8-10 mm.

Diagram Descriptions:

• Front View: Shows the square luminaire with overall dimensions 595mm x 595mm.
• Side View: Illustrates the luminaire's profile, indicating a depth of 32mm and how it fits into a ceiling.
• On/off / DIM Terminal Block: A terminal block with connections labeled DA, DA, E, L, N. 'E' signifies Earth continuity or termination of the earth wire.
• Switch-Control / DALI-2 Wiring: A detailed wiring diagram showing connections for DALI-2 control. It includes color coding for wires: Red (DA+), Blue (DA-), Brown (L - Live), Green (N - Neutral).
• Electrical Connection: Shows the main power input terminals for 220-240V AC, Neutral (N), and Live (L).

Safety and Installation Guidelines

Important Safety Warning: The luminaire is not suitable for covering with thermally insulated material. Ensure adequate ventilation around the fixture.

Installation Procedure:

• Installation must be performed by a qualified electrician.
• Ensure the voltage and frequency used match the markings on the luminaire and driver.
• Always switch off the power supply before commencing installation or any maintenance.
• This mounting instruction manual must be kept accessible for future reference during installation and servicing.
• The light source in this luminaire is not replaceable. When the light source reaches the end of its lifespan, the entire luminaire must be replaced.

Installation Visuals: The document includes three diagrams illustrating the process of fitting the luminaire into a prepared ceiling opening.

Manufacturer Information

Airam Electric Oy Ab

Address: Sementtitehtaankatu 6, FI-04260 Kerava, Finland

Website: www.airam.fi

Document Date: 2022.09.27