VEVOR Handheld Pool Vacuum Cleaners User Manual

Product Models

• MODEL:11063BX-A
• MODEL:11063BX-B

The VEVOR Handheld Pool Vacuum Cleaner is designed for efficient pool cleaning. Please read all instructions carefully before operating.

Safety Instructions

Thanks to its easy assembly, you'll be able to use your automatic cleaner in a few minutes. Follow the instructions carefully and SAVE THIS MANUAL.

Assembly precautions:

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. Product capabilities apply to properly and completely assembled product only.

Use precautions:

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near this item.
3. Use as intended only.
4. Inspect before every use; do not use if improper assembly.
5. FOR LONGER LIFE (IMPORTANT): Store handheld pool vacuum cleaner out of direct sunlight.

Installation Instructions

1. ASSEMBLE HANDLE:

Assemble the handle by connecting six aluminum tubes.

Diagram Description: Shows the assembly of the telescopic pole by connecting multiple aluminum tubes end-to-end. A close-up shows how the tubes connect.

2. ATTACH HANDLE:

Insert handle into connector block and screw to tighten.

Diagram Description: Illustrates inserting the assembled handle into a connector block and securing it with a screw.

3. ATTACH BAG:

Secure draw string bag to vac head.

Diagram Description: Shows how to attach the collection bag to the vacuum head, securing it with a drawstring.

4. ATTACH HOSE:

Attach the garden hose to the hose quick-release fitting and attach it to the end piece of the vacuum cleaner.

Diagram Description: Depicts connecting a garden hose to the quick-release fitting on the vacuum cleaner.

5. TO ATTACH TELEPOLE:

If you are going to use the telepole (not included), please remove the handle connector by removing the pin. Then attach the plastic handle using a pin in the same location.

Diagram Description: Shows how to attach a telepole to the vacuum cleaner by removing the standard handle connector and attaching the telepole using a pin.

Recommended Use Method

The most effective method of vacuuming a pool is to use slow, easy strokes back and forth over the entire area. The water pressure from the hose passes into the vacuum head, powering its massive suction power and pulling debris and leaves into its storage bag. The bag retains the dirt particles and allows the passage of clean water back into the pool.

Contact Information

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

✉️ CustomerService@vevor.com

Company Information

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E RANCHO CUCAMONGA, California, 91730 United States of America

UK REP: Pooledas Group Ltd, Unit 5 Albert Edward House, The Pavilions, Preston, United Kingdom

EC REP: SHUNSHUN GmbH, Römeräcker 9 Z2021, 76351 Linkenheim-Hochstetten, Germany

Made In China

This is the original instruction. VEVOR reserves the right to interpret this user manual. Product appearance is subject to the actual product received. Information may be updated without prior notice.