STIER Roller Stand 200 kg Load Capacity
Article No.: 903427
Introduction
This original operating manual provides essential knowledge for the safe handling and maintenance of the STIER Roller Stand. It is crucial to read and follow all instructions before operating the product to prevent accidents and ensure warranty coverage.
About This Guide
Please read this instruction manual carefully before setting up, operating, or performing any maintenance on the product.
General Safety Instructions
DANGER
- DO NOT stand on this product. You could fall off.
- DO NOT mount this product on a truck bed or other moving object.
- Do not use the product if you are tired or under the influence of drugs, alcohol, or medications. A brief moment of carelessness can lead to serious injury.
- DO NOT modify this product in any way. Do not weld external locking rods or attach electrical equipment.
- Store the product on flat surfaces. It may become unstable and fall on uneven surfaces.
- Ensure users have read and understood these instructions before operation or assembly.
- Keep children and bystanders away from the work area.
- This product is not designed for direct lifting with a forklift or towing with mechanical equipment.
- Empty the product and secure it well before transporting it in a vehicle.
- Do not exceed the maximum product weight, including contents.
- Be aware of dynamic loading. Sudden load movements can cause temporary overloading and product failure.
- Keep the work area clean, dry, free of clutter, and well-lit. Poorly lit or cluttered areas can lead to injuries.
- Do not wear loose clothing, hanging objects, or jewelry. Keep hair, clothing, and gloves away from moving parts to prevent entanglement.
- Use sufficient personnel for assembly and transport to avoid injury or product damage.
- Inspect for damaged parts before each use. Ensure the product functions correctly and replace any damaged or worn parts immediately. Never operate with a damaged part.
Technical Specifications
| Specification | Value |
|---|---|
| Load Capacity (Tragkraft) | 200 kg |
| Height (adjustable) | 730-1,050 mm |
| Width | 370 mm |
| Reel Diameter | 57 mm |
| Ball Diameter | 25 mm |
| Thickness | 1 mm |
| Weight | 10.2 kg |
Parts List and Diagram Description
The product diagram illustrates the assembly of the roller stand with numbered components. The parts are detailed in the table below:
| No. | Designation | No. | Designation |
|---|---|---|---|
| 1 | Ball Caster | 7 | M10X65 Bolt |
| 2 | Seating | 8 | Rail |
| 3 | Roller | 9 | Socket |
| 4 | Positioning bolts | 10 | Nut (Mutter) |
| 5 | Seating | 11 | Support |
| 6 | Star handle screw | 12 | Rubber sleeve (Gummimanschette) |
Disposal
Dispose of this equipment at an authorized disposal point in accordance with national circular economy and waste regulations. The device and its accessories are made of various materials. Defective components must be treated as hazardous waste. Consider waste avoidance methods such as selling or repairing functional products before disposal. Remove all fluids (oil, fuel) and batteries/lamps if possible without damage. Private customers can return the product to local collection points. Commercial customers can return it to the manufacturer.
♻️ [Recycling Symbol]
Reservation of Rights
STIER Industrial GmbH is not liable for data loss on returned devices. All trademarks and service marks are highlighted accordingly. STIER Industrial GmbH reserves the right to make changes, deletions, or additions to the provided information without prior notice. Technical data, specifications, and appearance are subject to change and may differ from the actual product.
Online Manual
Access the digital version of the operating manual by scanning the QR code provided or by entering the manufacturer number (903427) into the search field on the STIER website.
