Hathaspace HEPA 2-Filter Pack for HSP003
H13 FILTER
SAFETY INFORMATION
- Follow all safety guidelines. Read all instructions before using.
- This air purifier is only meant to be used with the Hathaspace HSP003.
- After unwrapping, discard plastic and keep away from children.
- Damaged replacement filters may not properly purify the air.
- Contact our team immediately if you have received a damaged replacement filter set.
MAINTENANCE GUIDELINES
To maintain the performance of the air purifier and purification effect, we advise to replace the filters every 4 months or 3000 hours.
PURCHASING ADDITIONAL REPLACEMENT FILTERS
To ensure the warranty for your air purifier remains active and to avoid shortening the life of your air purifier, use only certified Hathaspace filters.
To purchase more replacement filters, go to hathaspace.com/filterclub or scan the QR code to the right with your smart phone camera.
For more information on filters, you can visit our official website www.hathaspace.com.
[QR Code leading to hathaspace.com/filterclub]
HOW TO INSTALL
- Step 1: Touch [power button] to turn off the device.
- Step 2: Open the filter cover. Hold the handle of the cover and pull it out.
-
Step 3: Take the filters out in proper order. Put used filters into garbage bags to prevent contaminants from falling out.
- Pre Filter
- HEPA Filter
Notice:
- Filters are classified as nonflammable rubbish. Dispose of filters according to local regulations.
- Your mesh pre-filter can be used repeatedly; wash and dry your filter regularly for optimal performance.
-
Step 4: When installing the filter, make sure it's facing the right way. It will fit snugly and easily.
Filter Installation:
HEPA filter: Face this side out
pre-filter: Face this side out
Extend the life of your filter by using a vacuum cleaner to occasionally remove dust.
For optimal performance, replace your Hathaspace filter three times a year.
The mesh pre-filter is washable; clean the filter more often if you have pets!
This filter does not need to be replaced.
- Step 5: To close the cover, match-up the slots on the bottom of the unit and cover so they align and click into place. Once the cover is closed, it is ok to turn the power back on.
- Step 6: Be sure to reset the "filter replacement reminder" after replacing the filters.
CUSTOMER SUPPORT
Email: team@hathaspace.com
Phone: (800) 446-0535 Customer Support
*Please have your order confirmation number ready before contacting.