QUICK INSTALLATION GUIDE
This is a quick installation guide to help you get started. For the full (detailed) version of the manual please visit www.phanteks.com.
Please take a moment to carefully go through the quick installation guide. Phanteks will not take responsibility for any damages incurred due to incorrect installation and usage of this product.
1. I/O PANEL
The I/O panel typically includes the following ports:
- 1. USB 3.0
- 2. Microphone
- 3. Headphone
- 4. LED Indicator
- 5. Power Button
- 6. HDD LED Indicator
RGB LED Control (6) Instructions:
- HOLD Long Press: On/Off
- Short Press (<1 sec): Choose LED Color (10 colors)
- 2 Sec Press: Choose Mode (Mode 1: Static Mode, Mode 2: Breathing Mode, Mode 3: Color Cycle)
2. PANEL REMOVAL
Side Panel Removal:
- Unscrew the 2 captive thumbscrews to remove the side panels.
- Unscrew the 4 captive thumbscrews to remove the side panels.
Front Panel Removal:
For the front panel, place your hands on the indicated area and pull outward.
3. MOTHERBOARD INSTALLATION
Standoff screws are pre-installed for Micro ATX motherboards.
Install the motherboard using the provided M3 screws.
4. PSU/HDD/SSD INSTALLATION
PSU Installation:
Use the provided screws to secure the PSU in place.
SSD INSTALLATION
Slide the SSD into the bracket and screw in from the side to lock it in place.
3.5" INSTALLATION
DROP-N-LOCK System:
Align the corner of the bracket to the guide and drop down to lock.
Place the hard drive into the tray and push in the arms to lock it.
