Vilo 6 Mesh Wi-Fi System Quick Start Guide

Indicator Light Guide

Solid white light: Main router: Connected to broadband. Sub router: Connected to the main router and signal is strong.
Flashing white light: Main router: Connection to broadband is intermittent. Sub router: Connected to the main router but signal is weak. Try moving it closer to the main router.
Solid amber light: Main router: Ready for configuration. Sub router: Ready to connect to the main router.
Flashing amber light: Sub router: Pairing and syncing with the main router.
Solid red light: System is starting up. This will take about a minute.
Flashing red light: Main router: Unable to connect to broadband. Troubleshooting steps: 1. Ensure the WAN/LAN port is connected to the modem with an Ethernet cable. 2. Verify the Ethernet cable is securely plugged in and undamaged. 3. Check modem broadband settings. If DHCP, the router connects directly. If PPPoE, ensure correct broadband account name and password are entered. 4. Confirm broadband connection is working. Sub router: Unable to connect to the main router. Troubleshooting steps: 1. Move the sub router closer to the main router. 2. Reset the sub router to factory settings. 3. Confirm setup process in the app is complete.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Any changes or modifications not explicitly approved by the manufacturer could void your authority to operate this equipment.

RF Exposure Information: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Maintain a minimum distance of 20cm between the radiator and your body.

ISED Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure. Users can obtain Canadian information on RF exposure and compliance.

This equipment complies with Canada radiation exposure limits for an uncontrolled environment. Maintain a minimum distance of 20cm between the radiator and your body.

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.