USB Mini Humidifier Model A-1969-2

Important Safety Instructions

• ⚠️ DO NOT use the humidifier on flammable surfaces or near flammable materials, heat sources or open flames.
• ⚠️ DO NOT use if the USB cable or humidifier is damaged. If the humidifier malfunctions, is damaged or is immersed in water, stop using the humidifier.
• Only use with the USB cable provided.
• Indoor dry location use only.
• ⚠️ DO NOT touch the ultrasonic disc with a finger or scrape it with metal tools to avoid damage to the disc.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• ⚠️ DO NOT immerse the humidifier in water or any other liquid.
• ⚠️ DO NOT leave the humidifier on or unattended overnight.
• The appliance is only to be used with the recommended vaporizing medium. The use of other substances may give rise to a toxic or create a fire risk.

Product Components

The humidifier includes the following parts:

• ① Humidifier unit
• ② Plastic pipe
• ③ Spring
• ④ Water absorber (2pcs included)
• ⑤ USB cable
• ⑥ Ultrasonic disc
• ⑦ Power button

Diagram Description: A visual representation of the USB Mini Humidifier and its components. The main unit is cylindrical with a top mist outlet. Labeled parts include the humidifier body, plastic pipe, spring, water absorber pads, USB cable, ultrasonic disc, and power button.

Getting Started & Operating Instructions

Follow these steps to set up and operate your humidifier:

1. Prepare the Water Absorber: Before operating, place the water absorber into water and wait for over 10 seconds until it is completely soaked. Fill the water reservoir with room temperature water. DO NOT overfill the reservoir. Caution: DO NOT use distilled water or pure water as this will reduce the mist output.

   Diagram Description: Shows a water absorber pad being soaked in water.

2. Assemble the Mist Outlet: Rotate and open the top of the humidifier. Insert the spring into the plastic pipe.

   Diagram Description: Illustrates opening the humidifier top and placing a spring inside a plastic pipe.

3. Insert the Water Absorber Assembly: Insert the soaked water absorber into the small hole at the top of the humidifier. The other end of the water absorber is inserted into the spring-loaded plastic tube area.

   Diagram Description: Shows the soaked water absorber being inserted into the top of the humidifier, connecting to a spring-loaded tube.

4. Connect Power: Plug the USB cable into the humidifier and plug the other USB end into any USB power supply.

   Diagram Description: Depicts the USB cable connected to the humidifier and a USB power source.

5. Position the Humidifier: Place it on a stable and level surface.

6. Turn on the Humidifier: Turn the humidifier clockwise. Press the power button (⑦).

   • Press once: Both the light and humidifier will power on.
   • Press twice: Only the humidifier will power on.
   • Press three times: All will switch off.

Light Settings

The light colour changes automatically during operation. You cannot set a chosen colour. The colour sequence is Red - Purple - Blue - Green - Yellow - Orange.

Diagram Description: A representation of the humidifier emitting colored light, cycling through various hues like red, purple, blue, green, yellow, and orange.

Notes

4-hour auto off function:

When the humidifier is switched on, it will run for 4 hours before switching off. If there is a water shortage and no mist is emitted, the light will still stay on for 4 hours.

• There might be no mist emission for around 3 minutes - this is normal because it can take time for the water absorber to release water to the ultrasonic disc.
• If there is no mist emission or mist emits unstably during operation, please make sure the water container is full with water, the water absorber is soaked, the aged water absorber is replaced, or the water hole and ultrasonic disc are clean.
• ⚠️ DO NOT use essential oils, perfume or distilled water as this will cause the cotton swab to clog and the humidifier to be unusable.
• Please make sure the cotton core has soaked a few minutes before you turn it on.

Moving and Storage Instructions

• ⚠️ DO NOT move the humidifier while in use. Spillage may cause damage to the humidifier and other parts.
• Always hold both the base and the cover when moving the humidifier.
• Empty the reservoir and clean the humidifier before storing.

Care and Maintenance

• Always turn OFF and unplug the humidifier for care and maintenance.
• Clean the humidifier with a soft cloth.
• Clean scale deposits on the ultrasonic disc with clean water.
• ⚠️ DO NOT use metal or hard abrasive to scrape the ultrasonic disc.
• Clean the ultrasonic disc regularly to avoid scale building up.
• If the ultrasonic disc becomes excessively scaled, clean it repeatedly to descale.
• Dry the diffuser completely before using it again.
• ⚠️ DO NOT use vinegar or other corrosive cleaning agents.

12 Month Warranty

Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.

Kmart will provide you with your choice of a refund, repair or exchange (where possible) for this product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect.

Please retain your receipt as proof of purchase and contact Kmart's Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer Help at Kmart.com.au for any difficulties with your product. Warranty claims and claims for expense incurred in returning this product can be addressed to their Customer Service Centre at 690 Springvale Rd, Mulgrave Vic 3170.

Kmart's goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.

Troubleshooting

Caution: ⚠️ DO NOT shake or tilt the product when there is water in the reservoir or else the product will not work properly.