ION Total PA™ Ultimate Quickstart Guide

Getting Started

1. Register Your Product

   Visit IONAUDIO.COM/SUPPORT for articles, videos, and support. Register your product and sign up for the newsletter.

2. Plug In and Power On

   Connect the power cable and turn the speaker on. Input Voltage: 100-120 VAC, 60 Hz, 320W.

3. ION Sound Control™ App

   Connect to the ION SOUND CONTROL™ App for a more dynamic experience:

   • Connect your phone to the speaker via Bluetooth (Step 4).
   • Download the app from the Apple App Store or Google Play Store.
   • Open the app on your device.

Create Your Sound Experience

Bluetooth

• Power on the speaker or press SOURCE to select BLUETOOTH to pair.
• Choose "Total PA Ultimate" in your Bluetooth settings menu.
• Press Play in your preferred music player app on your device.
• Ensure your device volume is turned up.

AUX IN

• Press the SOURCE button on the product or select AUX in the app.
• Plug any sound source into the AUX input using an XLR or 1/8" (3.5 mm) cable (not included).
• Ensure your source device volume is turned up.

USB Playback

• Insert a USB drive (not included) with MP3 files (16 GB max).
• Press the SOURCE button on the product or select USB in the app.
• Press PLAY/PAUSE to play or pause a track.
• Press the > button to skip to the next track. Press the < button to go to the beginning of the track, and press again to skip to the previous track.
• Press the REPEAT button to choose the playback mode (see User Guide).

Customize Your Sound Experience

Control Knob

• Rotate to adjust the overall Main Volume.
• Push to select MIC 1/2 to adjust each MIC INPUT volume.
• Push to select SOURCE to adjust BLUETOOTH, AUX, or USB volume.
• Push to select ECHO to adjust the echo effect on Mics.
• Push to select LOW or HIGH to adjust EQ settings.

Microphone Inputs

• Plug a microphone into MIC input 1 or 2 and turn the MIC switch to ON.

Light Modes

• Press the LIGHTS button or use the app to cycle through light modes.

Stereo-Link™

See the User Guide or app for instructions to connect to another Total PA™ Ultimate.

Package Contents

• Total PA™ Ultimate
• Power Cable (IEC320 C13, 5 ft/150 cm)
• (2) Microphones with Cables (15 ft/450 cm)
• Mic Holder Clip
• Speaker Stand
• Quickstart Guide

Important Safety Instructions

Read and keep these instructions. Heed all warnings and follow all instructions.

• Do not use near water.
• Do not block ventilation openings.
• Do not install near heat sources.
• Only use attachments/accessories specified by the manufacturer.
• Use only the cart, stand, tripod, bracket, or table specified by the manufacturer.
• Caution: Danger of explosion if battery is incorrectly replaced.
• Do not ingest battery—chemical burn hazard.
• Dispose of batteries according to local ordinances.
• To reduce the risk of electric shock, do not remove any cover. No user-serviceable parts inside. Refer servicing to qualified service personnel only.
• Warning: To prevent possible hearing damage, do not listen at high volume levels for long periods.
• This apparatus is for professional use only.

FCC Notice: This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

ISED Canada Notice: This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).