MIOFIVE S1 User Manual
Please read this manual before operating your device and keep it for future reference.
Distractions can lead to accidents and the risk of injury or death. Always keep your eyes on the road, and keep aware of your surroundings.
Website: www.miofive.com
Support Email: support@miofive.com
Unboxing and Installation
What's in the box
- Miofive S1 Dash Cam x 1
- Car Charger x 1
- Charging Cable x 1
- Crowbar x 1
- Data Cable x 1
- Static Sticker x 2
- 3M Adhesive x 1
- User Manual x 1
Product Diagram
Front View:
- 1 Camera Lens
- 2 Speaker
- 3 Vents
Side Views:
- 4 Mini-USB Connector
- 5 Memory Card Slot
Product Diagram (Buttons/Screen)
- 1 Adjustment Bolt
- 2 Album/Previous Button
- 3 Setting/Back Button
- 4 Emergency Video/Next Button
- 5 OK (Confirm) Button
- 6 Screen
- 7 Status Indicator LED
Product Diagram (Ports)
- 1 Power Port
- 2 Power Button
- 3 Vents
- 4 Microphone
- 5 Reset Button
Rear Camera (optional)
Available only for specific models and can be purchased separately. Requires pairing with the Miofive S1 dash cam.
- 1 Rear Camera Lens
- 2 Brackets (Rotatable support)
- 3 Power Port
Miofive MicroSD Card
The dash cam supports Class 10 memory cards with 64GB - 512GB capacity. High Speed Rating SPECIFIC MicroSD Cards are required for 4K video recording.
Note: Miofive recommends using their branded SD cards for optimal compatibility and an 18-month warranty. SanDisk cards are not recommended.
Recommended Card Specifications: Type: MicroSDXC, UHS: UHS 3, Class: Class 10, Max Capacity: 512GB.
Inserting / Removing the MicroSD Card
Locate the microSD card slot. Insert the memory card until it clicks into place. To remove, gently press its edge inward until it clicks and pops out, then pull it out.
Note: Do not insert/remove the microSD card while the camera is turned ON. Turn the device off before removing the memory card.
Formatting the MicroSD Card
Navigate to Settings > More settings > Format Built-in Storage > YES.
Note: Formatting the microSD card will erase all existing data. Back up important files before proceeding.
CPL Filter
The Miofive Dash Cam CPL (Circular Polarizing Lens) enhances recordings by reducing glare, protecting the lens from fingerprints and scratches, and improving color and contrast.
Installation Steps
1. Install the electrostatic sticker
Park your car in a safe area with the engine off. Clean the windshield and install the electrostatic sticker in the recommended area, ensuring no air bubbles. Do NOT attach the dash cam with the sticker before camera calibration.
2. Connect the power supply
Connect the USB Type-C cable to the dash cam. Route the cable along the windshield edge, tucking it into seams (use the crowbar if needed), and run it to the car charger. Insert the car charger into the cigarette lighter. Ensure the cable is kept away from the airbag area.
Note: Securely position the car charging cable to avoid disruption.
3. Camera Calibration
Find a good position and angle. Start the car engine. Navigate to System Settings → AI → Camera Calibration. Align the vertical line to the center and the horizontal line to the vanishing point of the road on the preview screen. Ensure the dash cam does not interfere with the driver's view.
Note: AI accuracy is affected by installation position. Install carefully.
- Correct Calibration: Vertical line centered, horizontal line at vanishing point.
- Incorrect Calibration: Camera tilted.
- Incorrect Calibration: Engine cover occupies too much area.
4. Attach the Dash Cam
Remove the protective sticker from the dash cam bracket. Attach the bracket to the center of the electrostatic sticker. Press firmly to ensure the adhesive makes good contact. Lock the bracket to the dash cam; you will hear a snap.
5. Check and adjust the dash cam angle
Ensure the dash cam is at the correct angle. Adjust the camera angle up or down on the preview screen to confirm it is facing correctly.
6. Mount Attachment
To attach the mount, align the pins on the mount with the holes on the adhesive attachment and slide down until it clicks. To remove, slide up.
7. Rear Camera Installation
Select an installation location for the rear view. Clean the surface. Peel the protection film and fix the rear camera. Connect it to the front camera using the included rear camera cable.
8. Hiding the Cable
Ensure the cable does not obstruct the rear window view. Avoid kinks. Use the crowbar to pry open lining if necessary.
Miofive Dash Cam App
Miofive Dash Cam App Download
Scan the QR code or search "[Miofive]" in the App Store or Google Play to download the app.
Note: Ensure the Dash Cam Wi-Fi is on to connect the app.
Systems Supported: Android 5.0 and above / iOS 11.0 and above.
Using Your Miofive App
Register an account for advanced features.
Bluetooth Connection:
- Open the app and go to "Devices."
- Choose your device model.
- Press and hold the OK button on the dash cam for 5 seconds to display a QR Code.
- In the app, click "Start Scanning" to activate scanning mode. Scan the QR Code on the dash cam to connect.
Note: If connection fails, retry or consider using Wi-Fi.
Wi-Fi Connection:
- Check the dash cam's power indicator (solid blue).
- Ensure your phone and dash cam are within 2 meters.
- Turn on your phone's Wi-Fi.
- Choose your Miofive network name (SSID) from the Wi-Fi list.
- Input the password (default: 1234567890).
- Return to the Miofive APP once connected.
Operation and Settings
LED Indicator Information
| LED Indicator | Dash Cam Status |
|---|---|
| Blue LED light solid on | Working, loop recording |
| Blue LED light blinks | Stop recording, user operating |
| Blue and red alternating flashes | MicroSD card abnormal |
| Red LED light solid on | Emergency recording |
| Red LED light blinks | Firmware updating |
Control Menu
Press the buttons on the right side of the LCD panel to enter the control menu.
On-Screen Display Icons:
- 1. Rear cam connected / disconnected
- 2. Time-lapse Recording Setting: Enable / Disable
- 3. Power by Hardwire Kit / USB cable / Power cable disconnected
- 4. Front cam recording with 4K / 2K / HD (1080P) resolution
- 5. GPS signal detected / No GPS signal
- 6. Parking Monitoring Setting: Enable / Disable
- 7. Bluetooth On / A mobile phone connects to the dashcam via Bluetooth
- 8. Wi-Fi On / A mobile phone connects to the dashcam via Wi-Fi / Wi-Fi Off
- 9. Microphone On / Microphone Off
Pressing the [Emergency Video/Next Button] locks the current video clip and stores it in EMER Video.
Features
Note: Not all features are listed in this manual.
Parking Mode
When the engine is off, the Dash Cam powers off in 10 seconds and enters Parking Mode. If a shock or crash is detected, the G-Sensor activates the Dash Cam to record a 60-second video before re-entering Parking Mode.
Time Lapse
A recording technique where the frame rate is lower than playback, making time appear to move faster. Operates for up to 24 hours after ignition is turned off.
Note: Requires a Miofive USB Type-C hardwire kit (NOT included) for continuous power.
Emergency Recordings
A 60-second video is captured when the G-Sensor is activated by sharp turns or sudden stops. The oldest recordings are overwritten when 30% of SD card space is used.
Travel Log
Records driving path, storing GPS information with videos and photos. Journeys can be stored in your personal account in the cloud.
Note: GPS log data is stored anonymously in the US Amazon Web Service.
Accessories - Hardwire Kit
The Miofive USB Type-C Hardwire Kit is sold separately. It supplies power to the car recorder when the engine is switched off by connecting to the car battery.
Firmware/APP Update
APP Update
Your mobile system and the app will notify you of new app versions. Follow the prompts to update.
Firmware Update
Update firmware via OTA (Over The Air). Open APP > Connect To Dash Cam > Enter Settings > Firmware Update, then follow the prompts.
Note: Do NOT power off the Dash Cam during the update. It will restart automatically upon successful completion. Contact support if the update fails.
Updates and Maintenance
Troubleshooting
| Scenario | Malfunction Symptom | Root Cause/Solution |
|---|---|---|
| Installation | Image blur | 1. Ensure lens protector is removed. 2. Adjust camera angle to avoid windshield reflections. |
| Day and night image quality differs a lot | Window film transparency (68%-80%) affects recording results. | |
| Power disconnect frequently | Adjust car charger angle to avoid loosening position, depending on car model. | |
| The rear cam is not working | 1. Ensure rear cable is properly connected. 2. If fault persists in rear cam or cable, contact support. | |
| Connecting to PC | Cannot find external storage | Use a USB cable that supports data transmission (the charging cable in the box does not). |
| Start up | Unable to start | 1. Check car charger indicator light; reinstall if off. 2. Connect USB cable to power source if built-in battery is low. 3. Press power button for 8 secs to shut down, then reboot. |
| Recording | Welcome screen stops, screen black out, button does not work | Press power button for 8 secs to shut down, then reboot. |
| Did not start recording automatically after start up | 1. Reboot the dash cam. 2. Format SD card via Dash Cam setup menu. | |
| Stops recording abnormally | Format SD card via Dash Cam setup menu. | |
| LCD screen black out | If "LCD Auto-Off" is enabled, the screen enters power saving mode. Press any button to turn it back on. | |
| Video recorded is blur | 1. Ensure lens protector is removed. 2. Ensure windshield or camera lens is clean. | |
| Connecting to the App | No sound is recorded in the video | 1. Check if "Microphone" is Off in Recording settings. 2. Turn "Microphone" On in Recording settings. |
| Video time stamp incorrect | 1. Connect to the app for auto time calibration. 2. Manually set "Date and Time" under "System Settings." | |
| Stops recording abnormally | Format SD card via Dash Cam setup menu. | |
| Cannot connect to dash cam via Bluetooth | 1. Check Bluetooth range (within 2 meters) and ensure Bluetooth is enabled on both devices. 2. Restart connection. Reset dashcam using the reset button. Turn mobile device's Bluetooth off and on. 3. Verify Bluetooth functionality with other devices. 4. Try Wi-Fi connection if Bluetooth fails. | |
| Cannot connect to dash cam via Wi-Fi | 1. Ensure phone Wi-Fi is on and select Miofive's Wi-Fi SSID. 2. Force close and restart the app. 3. Turn off mobile data. If network issues persist, try airplane mode then Wi-Fi. | |
| Cannot playback the recorded video on the mobile phone | Playback might be related to the player or mobile phone's system. Try playback on a PC. | |
| Take too long to connect | 1. Ensure Bluetooth is within range (2 meters) and enabled. Restart connection. 2. Check for interference; use dashcam in a less interfering environment. 3. Close other apps or reboot mobile device if overloaded. 4. Update mobile OS and app. |
Specifications and Compliance
Specifications
| Attribute | Details |
|---|---|
| Image Resolution | Front - 4K UHD (3840x2160) @30fps; Rear(optional) - 2K QHD (2560x1440) @30fps |
| CPU | Novatek processor |
| Camera | Front - FOV 140, F1.8; Rear(optional) - FOV 115, F2.0 |
| Screen | 3-inch TFT LCD |
| WiFi | Wi-Fi 2.4 / 5GHz |
| Bluetooth | 4.2 |
| Storage | Up to 512GB Class 10, loop recording |
| GPS | Built-in GPS |
| G-SENSOR | Built-in 3 Gyro sensor, motion locking, adjustable sensitivity |
| Power supply | Super capacitor |
| Power Input | 5V / 2.4A |
| Dimension | Front - 95 x 54 x 48 mm; Rear(optional) - 63 x 34.5 x 25 mm |
| Weight | Front - 151g; Rear(optional) - 36g |
| Operating Temperature | -10°C~45°C / 14°F~113°F |
Precautions
Warning: Do not expose this product to rain, moisture, or water, as this may result in electric shock or fire.
Important Notices: Read all precautions, cautions, and instructions carefully before use.
CAUTION: To reduce the risk of electric shock, do not perform any servicing other than what is in the manual, unless qualified. Have the unit serviced by a qualified technician if:
- The unit has been exposed to rain or water.
- The unit does not seem to operate normally.
- The unit exhibits a marked change in performance.
Disposal of your Miofive dash cam
- Dispose of electrical and electronic products separately from municipal waste via designated collection facilities. Contact local authorities for disposal and recycling options.
- Correct disposal helps prevent negative environmental and health consequences.
- For more information, contact your city office, waste disposal service, or the shop where you purchased the product.
Product Compliance Information
IC Compliance
Miofive declares that the radio equipment Miofive Dash Cam complies with Industry Canada licence-exempt RSS standard(s).
English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation.
French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1. L'appareil ne doit pas produire de brouillage, et 2. L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This equipment complies with FCC exposure limits for an uncontrolled environment and should be installed and operated with a minimum distance of 20cm between the radiator and your body.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, try to correct it by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment & receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information (MPE)
This device meets EU requirements and ICNIRP guidelines for public exposure to electromagnetic fields. Operate with a minimum 20 cm separation distance.
WEEE
This product must not be disposed of as normal household waste. Return it to the point of sale or a municipal recycling collection point.
CE Compliance
Miofive declares that the radio equipment Miofive Dash Cam is in compliance with Directive 2014/53/EU.
Support and Community
Customer Service
Lifetime Support
18-month Limited Warranty
Email: support@miofive.com
For setup difficulties, email support@miofive.com. Most setup problems can be resolved quickly. Visit the website or follow on Facebook & Twitter for up-to-date information and useful content.
Community Promotion Program
Join the Miofive Community to extend your warranty by 6 months (total 24 months) by sharing videos caught on the dash cam. Share your thoughts on how Miofive can improve.
