Stream Controller Quick Start Guide
This guide provides essential information for setting up and using your Stream Controller.
Getting Started
Welcome to the Stream Controller! This device is designed to enhance your streaming experience. Please follow these steps to get started.
What's in the Box:
- Stream Controller Unit
- USB Cable
- User Manual
Setup Instructions
Follow these steps to connect and configure your Stream Controller:
- Connect the Stream Controller: Plug the USB cable into the Stream Controller and connect the other end to your computer.
- Install Software (if applicable): If required, download and install the necessary software from the SOOMFON support website.
- Configure Settings: Launch the software and follow the on-screen prompts to customize your controller settings, assign functions to buttons, and adjust audio levels.
Diagram Description: The initial diagram shows a physical representation of the Stream Controller with various buttons and a central dial. It is depicted connected via a USB cable to a computer, which has a monitor displaying a user interface.
Basic Operation
The Stream Controller allows for intuitive control over your streaming software. Key functions include:
- Button Assignments: Customize each button to trigger specific actions like starting/stopping streams, muting audio, or switching scenes.
- Dial Control: Use the central dial for volume adjustment or other assignable parameters.
- Indicator Lights: The controller features indicator lights to show status, such as power, connection, and active functions.
Troubleshooting
If you encounter issues, try the following:
- Ensure the USB cable is securely connected.
- Restart the Stream Controller and your computer.
- Verify that the correct software is installed and running.
- Check the SOOMFON support website for FAQs and firmware updates.
Support
For further assistance, please visit the SOOMFON support page or consult the full user manual.