Konifera BW92001 Balcony Sunshade
Installation and Operating Instructions
Document No: BW92001
Specifications
| Product Name | Material and Surface Treatment | Suitable Wall | Suitable Weather |
|---|---|---|---|
| BW92001 W x H m W: Product width H: Length of stretchers (Refer to packaging) |
Material: Steel Tubes/Aluminum/Plastic Polyester Surface treatment: Tubes: powder coating Fabric: waterproofing |
Concrete Brick Solid wood |
This product is intended for use as a sunshade. Recommended for use at wind forces below 5. Do not use in heavy rain. |
Precautions and Safety Instructions
Attention! ❗ Before opening the balcony sunshade, ensure all fixing bolts are properly installed and tightened. Always close the sunshade on windy days or when not in use. Failure to follow these instructions may lead to material and structural damage. Before opening or closing, ensure the plug pin is removed.
Explanation of Symbols:
- Avoid! ⚠️ Do not install the balcony sunshade in a windy place as it may get damaged and cause injuries.
- Before unpacking and installing, ensure you have all required tools and sufficient space in a clean, dry area.
- The product can be installed by laypersons if instructions are followed correctly. Consult a qualified person for any problems.
- Use all screws and nuts correctly; improper mounting is risky.
- Watch your fingers during installation.
- Do not install near heat sources (e.g., furnace).
- Do not hang anything on the frame to avoid damage or injuries.
- Never use the balcony sunshade on windy days.
- Please close the balcony sunshade on windy days.
- Do not modify the balcony sunshade in any way.
- Do not use a barbecue or ignite fire near the sunshade.
- Do not use if damaged or faulty.
- Use in frosty conditions may cause damage.
Accessories and Required Tools
Accessories:
- Expansion bolts: 4 PCS
Required Tools:
- Masonry drill bit: 10 mm
- Wrench (M8)
Diagram Description: An illustration shows the Balcony Sunshade, four expansion bolts, a masonry drill bit (10 mm), and a wrench (M8). A diagram indicates installation dimensions: the width of the sunshade plus 150mm (W+150mm) and the height plus 150mm (H+150mm).
Installation
Step 1: Choose Installation Location
Select the desired location for installation. Caution: The provided expansion bolts are for brick and concrete walls. For other materials, use suitable bolts and ensure the wall is strong enough to support the product.
Installation Dimensions:
- H = height of the balcony sunshade
- W = width of the balcony sunshade
Step 2: Mark and Install
Mark the positions for drilling holes and assemble the balcony sunshade. Hammer the expansion tubes into the holes with a mallet, then secure the wall bracket with the bolts. Components include: Expansion tube, Washer, Spring washer, Bolt.
Diagram Description: Diagrams illustrate the installation process: marking drill holes, hammering expansion tubes into the wall, and securing the wall bracket with bolts. Close-up views show the components: expansion tube, washer, spring washer, and bolt.
Operating Instructions
To Close: Retract the locking pin.
To Open: Insert the locking pin.
Diagram Description: Diagrams show the operation: closing the sunshade by retracting a pin, and opening it by inserting the pin. Close-up diagrams detail the locking mechanism.
Service Information
For assistance, please contact the relevant service hotline:
- Germany (D): Product advice: 01806/630630 (landline 20 cents/call, mobile max. 60 cents/call). Expert advice: 01806/111100 (landline 20 cents/call, mobile max. 60 cents/call).
- Netherlands (NL): Call center: 0900-1901 (15 cents/min).
- Austria (A): Universal: +43/662/448559 (home improvement advice, landline rates apply). Otto: +43/316/606159 (home improvement advice, landline rates apply).
- Switzerland (CH): For problems or questions, contact our service hotline! CH: 0848 85 85 00, Ackermann CH: 0848 85 85 11, Jelmoli Technik: 0848 858 530.
- France (F): For problems or questions, contact our online service! CH: 0848 85 85 01, Ackermann CH: 0848 85 85 21, Jelmoli Technik: 0848 858 530.
- Italy (I): For problems or questions, contact our assistance service! CH: 0848 85 85 02, Ackermann CH: 0848 85 85 31, Jelmoli Technik: 0848 858 530.
Diagram Description: Service section displays icons: a question mark next to a phone [❓?], a phone with a happy face [??] indicating successful contact, and a phone with a sad face [??] indicating issues. Diagrams show the sunshade in open and closed states, associated with happy and sad faces respectively.
Imported by baumarkt direkt GmbH & Co KG, Alter Teichweg 25, D-22081 Hamburg, Germany.
