User Guide for LOCKED models including: V1.1, LA-E5P Industrial Class Air Pillow System, LA-E5P, Industrial Class Air Pillow System, Class Air Pillow System, Air Pillow System, Pillow System
SiteMap
LA-E5P V1.1 Start Guide Rev00 1. Power on Make sure the E-stop button is released. Turn on the power switch. 2. Feeding Step 1: Put the film roll on the roller with the inflation end inward. Step 1: Step 2: Lift the handle. Step 3: Wind the film according to the arrow path. Step 4: Separate the film and wrap it around the air outlet. Step 4: Step 5: Lead the film and pass it through the gap between the heating wheel and the rubber wheel. Step 6: Release the handle. Step 2: Step 3: Step 5: Step 6: 3. Interface Film Model Power Indicator Light Edit Model Current Mode Start&Stop Status Setting Statistic Start Button Mode Switch Air volume Fine Adjustment (±5) Stop&Back Button Working Indicator Light 4. Operation Fault Indicator Light Please confirm the film model and select the corresponding parameters on the touch screen prior to mode selection. After setting the parameters, tap to select producing mode, and then start to produce. Mode Manual Operation After starting, the machine will continuously produce air bags until the the machine is stopped manually or the film runs out. Timer Set the timer in advance. The machine will automatically stop when the preset time is reached. Batch Set the target production quantity in advance. The machine will automatically stop production once the target quantity is reached. Auto (Optional) After starting, the machine will control its start and stop based on the stacking height of the air bags. - Automatically stop production - Automatically resume productionWPS 文字