Sealey - Leading Professional Tool & Workshop Equipment Supplier
User Manual for SEALEY models including: APMRT1 580mm Modular Racking Top Cupboard Unit, APMRT1, 580mm Modular Racking Top Cupboard Unit, Modular Racking Top Cupboard Unit, Racking Top Cupboard Unit, Top Cupboard Unit, Cupboard Unit, Unit
Modular Racking Top Cupboard Unit 580mm - Vinny Byrne
Sealey APMRT1 Modular Racking Top Cupboard Unit 580mm » Product
File Info : application/pdf, 4 Pages, 990.68KB
DocumentDocumentMODULAR RACKING TOP CUPBOARD UNIT 580MM MODEL NO: APMRT1 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. Refer to instructions Wear eye protection 1. SAFETY WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this product. 9 Locate product in a suitable working area. 9 Keep the work area clean, uncluttered and ensure there is adequate lighting. WARNING! Use product on level and solid ground, preferably concrete. Avoid tarmacadam since the product may sink into the surface. 9 Keep the product clean and tidy in accordance with good workshop practice. 9 Keep children and unauthorised persons away from the working area. 8 DO NOT use the product for any purpose other than that for which it is designed. 8 DO NOT exceed maximum capacity of product. 8 DO NOT undertake work on the product without the work piece being adequately secured. Use clamps or a vice (not included) to secure the work piece. Available from your Sealey stockist. 8 DO NOT use the product out of doors. 8 DO NOT get the product wet or use in damp or wet locations or areas where there is condensation. 8 DO NOT clean the product with any solvents which may damage the paint surface or the protective coating. 2. INTRODUCTION The Sealey modular racking system is finished with a heavy-duty textured powder coat to prevent against rusting. Simply choose your base, middle and top units and push together using nylon connectors to create versatile storage for the workshop, garage, home or office. All drawers have ball-bearing drawer slides for smooth operation and cupboard doors are fitted with spring loaded hinges allowing them to be fitted the side that suits your environment. Buy individually (see specific model number for full specs) or as one of our pre-created combo's. 3. SPECIFICATION Model no: Nett Weight: Overall Size (W x D x H): APMRT1 11.7kg 580 x 340 x 444mm 4. CONTENTS Item 1 2 3 4 5 6 7 8 9 10 11 12 Part APMRT1-01 APMRT1-02 APMRB3-03 APMRT1-04 APMRB3-05 APMRT1-06 APMRB1-07 MSP612.S APMRB1-09 APMRB1-10 APMRT1-11 APMRB3-14 Description Side Panel Top Panel Top Panel (Bottom Panel) Back Panel Shelf Door Plastic End Plug Machine Screw Pan Head Phillips M6 x 12mm Self-Tapping Screw ST4.8 x 30mm (Not Shown) Expansion Plug M8 x 40mm (Not Shown) Sealey Badge Lock 7 11 12 6 8 2 4 1 © Jack Sealey Limited Original Language Version 3 5 APMRT1 Issue 2 03/07/24 5. ASSEMBLY 4# Clips up 1# 8# 3# Step 1. Assemble the side panels, attach bottom panel with screws M6*12 as shown. 2# 4# put back panel inside of the bottom panel 3# Step 2. Assemble the back panel, bottom panel with screws M6*12 as shown. Note: The back panel position. 7# Same direction Step 3. Assemble the top panel using screws M6*12 as shown. Step 4. Insert the plastic end plugs. Step 5. Assemble the shelves. © Jack Sealey Limited 6# Step 6. Assemble the door as shown. Original Language Version APMRT1 Issue 2 03/07/24 Hole Option 1 10# Step 8. To fix the cabinet to the wall, mark the wall out before drilling the hole, drill the hole and insert the expansion plug. Step 7. To fix the cabinet to the wall. Mark the wall out before drilling the hole using the hole in the back panel as a template. Option 2 9# Step 10. To fix the cabinet to a wooden wall drill a hole using the illustration in option 2 as a guide. Step 9. Fix the cabinet to the wall using self-tapping screw ST4.8*30. 9# Step 11. Fix the cabinet to the wooden wall with the self-tapping screw ST4.8*30, no expansion plug is required. Step 12. Assembly complete. © Jack Sealey Limited Original Language Version APMRT1 Issue 2 03/07/24 ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations. REGISTER YOUR PURCHASE HERE NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. IMPORTANT: No Liability is accepted for incorrect use of this product. WARRANTY: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk www.sealey.co.uk © Jack Sealey Limited Original Language Version APMRT1 Issue 2 03/07/24