Moes TV01 Zigbee Smart Radiator Thermostat

Home, Smart Moes Home

Powered by Tuya

Works with Alexa

Works with Google Assistant

1. Information About This Manual

Before using the device, please read the entire operating manual. This manual contains important information regarding the intended use of the device. Please observe all safety instructions. Keep the manual for future reference. If you pass the device on to other users, please provide them with this manual as well.

2. Product Description

The device intelligently controls the heat flow to the radiator via its valve. With the Moeshouse thermostatic radiator valve, you can conveniently set the room temperature between 5 and 30 °C, saving over 15% energy. The device is part of the Tuya smart home system and operates using the ZigBee 3.0 protocol. All devices in the system can be easily and individually configured using the Tuya mobile application. The device allows temperature regulation in individual rooms. The radiator thermostat is compatible with all standard radiator valves and can be easily installed without draining water or interfering with the heating system. Thanks to the additional quick heating function, the valve opens for 5 minutes, rapidly heating the radiator. The heat emitted by the radiator quickly makes the room comfortably warm.

3. Device Description

The Moes TV01 Zigbee Thermostat Radiator Valve features an intuitive display and control buttons. The main display shows the date and temperature. Key indicators include:

4. Initial Operation

4.1 Before First Use

4.2 Inserting (Replacing) Batteries

To insert or replace batteries:

  1. Remove the battery compartment cover from the underside of the device.
  2. Insert 2 new LR6 (Mignon/AA) batteries into the battery compartment, ensuring they are correctly oriented.
  3. Replace the battery compartment cover and snap it into place.

The lifespan of new alkaline batteries is approximately 1.5 years. The battery symbol (?) on the display indicates that the batteries need to be replaced. After removing discharged batteries, wait about 1 minute before inserting new ones. This device supports the use of rechargeable batteries.

4.3 Setting Date and Time

Once batteries are inserted or replaced, the device will automatically prompt for date and time settings after briefly displaying the firmware version number.