Cubenest SQ1C1 Magnetic Wireless Car Charger with Mount
User Manual
Product Description
The Cubenest SQ1C1 is a premium magnetic car mount with wireless charging, supporting Qi2 and MagSafe technology. It enables fast and secure charging of your device with up to 15W of power. Thanks to its strong magnet and four-point mounting system, it is compatible with most ventilation grilles and ensures stable phone holding even while driving. The mount is made of high-quality brushed aluminum and is compatible with iPhones with MagSafe from the 12th generation.
Package Contents
- 1x Qi2 magnetic wireless charger
- 1x Mount for attachment to the ventilation grille
- 1x USB-C to USB-C cable (1 m length)
- 1x User Manual
Product Specifications
- Protection: Overvoltage, short circuit, thermal, and overcurrent
- Model: SQ1C1
- Input Power: 5V/2A, 9V/A, 12V/3A
- Output Power: 5W/7.5W/15W
- Material: High-quality aluminum, rubber, and plastic
- Compatibility: MagSafe technology
- Mounting: 4-point system for ventilation grille
- Input: USB-C
Compatible Devices for Charging: iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 mini, iPhone 14 Pro Max, iPhone 14 Pro, iPhone 14 Plus, iPhone 14, iPhone 15 Pro Max, iPhone 15 Pro, iPhone 15 Plus, iPhone 15, iPhone 16 Pro Max, iPhone 16 Pro, iPhone 16 Plus, iPhone 16. (For older models, MagSafe compatible accessories are required).
Note: The charger requires a minimum 20W charging adapter (not included in the package). A 45W car charger is recommended. Using a lower wattage adapter will reduce the wireless charging power.
Instructions for Use
Step 1: Installing the Mount to the Ventilation Grille
- Select a suitable location on your car's ventilation grille.
- Turn the screw counter-clockwise to extend the hook on the back of the mount to the desired length.
- Insert the mount into the ventilation grille so that the hook engages with the slat.
- Tighten the screw clockwise to securely attach the mount to the grille.
- Attach the plastic nut to the front of the mount.
- Insert the back of the charger into the plastic nut, then screw the nut until the connection is firm.
Step 2: Connecting the Charger to Power
- Connect one end of the USB-C cable to the car charger (min. 20W, not included).
- Connect the other end of the USB-C cable to the charger.
Step 3: Charging the Device
- Place your MagSafe-compatible device on the mount.
- Charging will start automatically.
- To remove the phone, simply pull it away from the magnetic surface.
- After fully charging, disconnect the mount from the charging adapter.
Note: If you are using a case, ensure it is MagSafe compatible.
Suitable for Most Ventilation Grilles
The mount is designed to fit a variety of car ventilation grilles.
Safety Instructions
- Warning: Do NOT use an uncertified or damaged USB cable for charging.
- Warning: Protect the charger from water and other liquids.
- Warning: Do NOT attach metal labels or other metal objects to the car mount, as this may affect charging or cause overheating.
- Warning: Do NOT place the device near hot or heated surfaces.
Frequently Asked Questions (FAQ)
- Is the charger compatible with Android phones? The charger is optimized for MagSafe. Android phones with Qi charging support may work, but without magnetic attachment.
- What power adapter should I use? We recommend using a car adapter with a minimum 20W output (a 45W car charger is recommended).
- Can I charge my iPhone with a protective case? Yes, if the case is MagSafe compatible. Metal or thick cases may interfere with charging.
- Does the charger support fast charging? Yes, the charger supports fast charging with a maximum output of 15W.
- Can I charge devices other than iPhones? The charger is primarily designed for iPhones with MagSafe. Other Qi-compatible devices may work, but magnetic attachment may not be secured. Ensure your device's case is MagSafe compatible.
- Is it safe to leave the charger plugged in all the time? Yes, but it is recommended to unplug the charger if it is not in use for an extended period.
- Why is the device not charging? Check if the charger is properly connected to power and if the device is correctly positioned on the charging surface. Try using a different USB cable or car power adapter.
- How firmly does the phone hold while driving? The strong magnet (1.4kgf) ensures secure phone holding. The charger will not be affected by sharp turns or bumps; your phone will remain firmly in place.
Troubleshooting Common Problems
- Weak phone magnetic hold
- Explanation: Insufficient magnetic hold may be caused by an incompatible case, improper phone centering, or dirt on the magnetic surface.
- Solution: Use only MagSafe compatible cases or no case at all. Ensure the phone is precisely centered on the mount and the magnetic surface is clean.
- Charging not working or is slow
- Explanation: Slow or no charging may be caused by an unsuitable adapter, a weak cable, improper phone placement, or an incompatible case.
- Solution: Use exclusively a car power adapter with a minimum 20W output (a 45W car charger is recommended). Ensure the phone is correctly positioned on the center of the charging surface and there are no interfering elements (e.g., a metal ring in the case) between it and the mount.
- Phone detaches while driving
- Explanation: Phone detachment while driving may be caused by a weak magnetic connection or vibrations from road unevenness.
- Solution: Ensure the mount is correctly installed in the ventilation grille and the phone is properly positioned on the charger.
- Phone or charger overheating
- Explanation: Overheating may be caused by prolonged wireless charging, high ambient temperature, or insufficient ventilation.
- Solution: Place the mount away from direct sunlight and ensure free airflow around the device. If overheating occurs, interrupt charging and let the device cool down.
- Incompatibility with some phones
- Explanation: The mount is optimized for iPhones with MagSafe technology (iPhone 12 and newer). Some phones from other brands or older models may not have integrated magnets or wireless charging support.
- Solution: For use with incompatible phones, we recommend purchasing a MagSafe compatible case and verifying that the phone supports Qi wireless charging.
- Difficulty attaching phone to charger
- Explanation: Difficulty attaching the phone to the charger may be caused by imprecise placement, a thick or improperly positioned case, or weak magnets on some models.
- Solution: Ensure the phone is placed precisely in the center of the charging surface. If using a case, check that it is MagSafe compatible and does not have metallic or thick layers that could interfere with the connection.
- Charger not working after installation
- Explanation: If the charger does not work immediately after installation, the problem may be with the power supply, incorrect cable connection, or an incompatible adapter.
- Solution: Check that the car power adapter is correctly plugged in and supports an output power of at least 20W. Ensure the cable is securely connected to both the mount and the adapter. If necessary, try another compatible adapter or cable.
- Phone slides or rotates while driving
- Explanation: Phone sliding or rotating while driving may be caused by a weak magnetic attachment, improper centering, or an unsuitable case type.
- Solution: Ensure the phone is correctly centered on the mount and you are using a MagSafe compatible case.
- Wireless charging not occurring
- Explanation: Wireless charging may not work if the phone is improperly positioned, uses an incompatible case, or if the mount is not properly powered.
- Solution: Ensure the phone is precisely placed in the center of the charging surface. Use only MagSafe compatible cases. Check the mount's power supply and use an adapter with a minimum 20W output. Verify that your phone supports Qi wireless charging standard.
Technical Support
- Email: complaint@cubenest.eu
- Phone: +420 704 613 961
Warranty and Returns
- This product has a warranty period of 24 months.
- In case of a defect, please fill out our complaint form: https://www.cubenest.eu/find-out-about/claim-and-complaint
