Please follow these instructions if you are having trouble pairing your Schlage Omnia™ Smart Lock to your Schlage Breeze app on your mobile phone.
-
Remove the Schlage Omnia™ from your door by removing the two screws located on the interior body.
[Illustration showing the interior side of the Schlage Omnia lock with two screws visible, indicating removal from the door.]
-
Ensure the batteries are installed and the lock has power.
[Illustration of the Schlage Omnia lock's battery compartment open, with batteries installed, and a power indicator.]
-
Hold down the reset button located on the inside of the exterior body, for 5 seconds until you hear “Input initialisation code.”
Note: A long, pointed object will be required to reach the small button.
Note: If you hear “Please enter administrator code.” then you have not held down the button for long enough, please try again.
[Diagram of the exterior side of the Schlage Omnia lock, with an arrow pointing to a small, recessed reset button.]
-
Enter 000000# (six zeros then hash).
[Icon depicting a hand interacting with a digital keypad, entering a code.]
-
You will hear “Deleting administrator successful." You can now reinstall the Schlage Omnia™ on the door.
[Illustration of the Schlage Omnia lock with radiating waves, indicating wireless communication and successful data deletion.]
-
Your Schlage Omnia™ Smart Lock has now been reset back to factory settings and can be paired to the Schlage Breeze app.
[Illustration of the Schlage Omnia smart lock installed on a door.]
-
Open the Schlage Breeze mobile app and follow the instructions to pair your Schlage Omnia™ Smart Lock.
[Icon of a padlock with three wavy lines emanating from it, representing a secure connection or pairing process.]
For more information, visit: schlage.co.nz/omnia
