Bresser 14939 WLAN/WiFi Camera

Introduction

This versatile device seamlessly integrates with standard monoculars, binoculars, and astronomical telescopes, transforming them into a powerful WLAN/WiFi eyepiece camcorder. Capture stunning videos and photos from afar and store them directly on your digital camera. With 2K HD resolution, you can achieve clear long-distance shots. It is ideal for various activities such as hunting, fishing, bird watching, mountain climbing, outdoor adventures, exploration, and even concerts, serving as your ultimate companion for every adventure.

Thank you for choosing this product. Please read the user manual carefully to ensure proper installation and optimal use.

General Warnings

⚠️ Risk of Choking: Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as these materials pose a choking hazard. This product contains small parts that could be swallowed by children.

⚠️ Battery Acid Hazard: Leaking battery acid can lead to chemical burns. Avoid contact of battery acid with skin, eyes, and mucous membranes. In the event of contact, rinse the affected region immediately with plenty of water and seek medical attention.

⚠️ Risk of Electric Shock: Never bend, pinch, or pull the power and connecting cables, extensions, and adapters. Protect the cables from sharp edges and heat. Before operating, check the device, cables, and connections for damage. Never use a damaged unit or a unit with damaged power cables. Damaged parts must be exchanged immediately by an authorized service center.

⚠️ Risk of Property Damage: Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.

Do not expose the device to high temperatures. Do not short-circuit the device or throw it into a fire. Excessive heat or improper handling could trigger a short-circuit, a fire, or an explosion.

Do not interrupt an on-going data connection to a computer before all data has been transferred. This could lead to data loss for which the manufacturer is not liable.

Product Description

[Image: Top view of the Bresser WiFi Eyepiece Camera, showing various ports and buttons.]

Key Components:

[Image: Underside view of the Bresser WiFi Eyepiece Camera, highlighting the USB-C port and reset hole.]

Installation

Fix the camera by rotating the mounting groove to adjust the three internal buckle positions. Rotate counterclockwise to release the activity buckle. Rotate clockwise to tighten the activity buckle.

Note: To avoid noise during locking, hold the narrow ring.

[Diagram: Illustrates rotating the camera's mounting groove to tighten or release the buckle, with arrows indicating 'Tighten' and 'Release'.]

Memory Card

Please insert the memory card before using this device. Ensure the memory card is correctly oriented with the notch on the device, then press the memory card until it clicks into place. Note that the memory card must be a high-speed TF card (CLASS 10 or higher).

Operation

Power ON/OFF Buttons

Power ON: Press and hold the power button for approximately 3 seconds to turn on the device. The left blue light will remain on, indicating the device is powered on (no card status indicated).

Start/Stop Recording: Short press the power button. The blue light will flash to indicate recording has started. Short press again to stop recording, and the blue light will remain on.

Power OFF: Press and hold the power button for 3 seconds. The indicator light will turn off, indicating the device has successfully shut down.

Turn ON/OFF the WIFI

After the eyepiece is powered on, press and hold the WIFI button for approximately 2 seconds. When the green light flashes, WiFi is activated and ready to connect to your mobile phone. To turn off WiFi, press and hold the WIFI button for approximately 2 seconds until the green light turns off.

Reset Hole

Use the reset hole to perform a forced shutdown in case of a system crash. Simply short press the reset hole to power off the device directly.

App Download and Connection

App Download

Download the "Onreal" app from the iOS/Android App Store onto your mobile phone. Alternatively, scan the QR code found on the packaging box or the manual cover.

[Image: QR Code for downloading the "Onreal" app.]

After installation, launch the app to connect to the camera via WiFi.

WiFi Name: BRESSER HD CAM

Connect WiFi and Add the Device

Follow these steps:

1. Download the "Onreal" app from the app store.
2. Navigate to your mobile phone's WiFi system settings.
3. Locate the local WiFi hotspot named "BRESSER HD CAM" and select it to connect directly without entering a password.
4. Open the "Onreal" app.
5. Follow the instructions within the app to add the device.

Once the device is successfully added:

• You can configure settings and operate the camera within the app.
• You can also playback photos and videos captured by the device through the app interface.

Charging the Eyepiece

When the eyepiece is not powered on, you can charge it by inserting a USB/DC cable. The red light will turn on to indicate that charging has started. Once charging is complete, the red light will turn off. The eyepiece supports charging via USB/DC or a power bank even while it is in use.

Introduction of App Functions

▶️ Record: Start/Stop the recording.

? Photo: Capture and save the photo.

Camera File Management

Playback videos/photos without downloading. Manage your pictures and videos from here:

• Download: Save the current photo/video into the App's Album. You can then view them without connecting the device. [?️ Icon]
• Videos screenshot: Take a picture of the currently played screen and save it as a photo.
• Delete: Delete the current photo/video.

Camera Settings

Configure video resolution, sound recording (on/off), speaker volume, loop duration, etc.

• Video Resolution: Default 2K, 2K/1080P optional.
• Speaker Volume: Default Middle, Off/Low/Middle/High optional.
• Loop duration: 1/3/5 minutes.
• Flip: Supports flipping up and down 180 degrees for video rotation. [? Icon]

Playback of Videos

After downloading a video in the Camera File section, you can find the downloaded pictures/videos in the Onreal App Album to edit and share them.

File Editing

Picture Editing: Supports image cropping and adding filters.

Video Editing: Supports video cropping and adding music.

After downloading the video, you can choose to play it at various speeds, such as 1 frame per second or 4x speed.

Multi-speed Playback

When playing back the video, you can select a playback speed, such as 1 frame per second or 2x speed, etc.

[Image: Video playback interface showing progress bar, play/pause controls, and speed indicator '1x'.]

[Image: Speed selection screen showing options like 1FPS, 0.2X, 0.5X, 1X, 2X, 5X.]

Overturn: Go to full screen of the video or exit full screen mode. [? Icon]

Connecting to PC

After inserting a USB cable into the computer, wait a few seconds, then press the WIFI button twice. This action will automatically connect to the computer and activate USB mode.

[Diagram: Shows the Bresser WiFi Eyepiece Camera connected via a USB cable to a computer.]

Specifications

Notes on Cleaning

• Turn off the camera.
• Clean the lenses only with a soft, lint-free cloth (e.g., microfiber cloth). To avoid scratching the lenses, use only gentle pressure with the cleaning cloth.
• Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do not use any cleaning fluid.

EC Declaration of Conformity

Hereby, Bresser GmbH declares that the equipment type with part number: 14939 is in compliance with Directive: 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.bresser.de/download/14939/CE/14939_CE.pdf ?

[CE Marking]

Disposal

[Symbol for proper disposal of packaging] Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.

[Symbol for not disposing of electronics in household waste] Do not dispose of electronic devices in the household garbage! As per the Directive 2012/19/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner. Empty, old batteries must be disposed of at battery collection points by the consumer. You can find out more information about the disposal of devices or batteries produced after 6 January 2006 from your local waste-disposal service or environmental authority.

[Symbol for draining battery] Drain the battery completely before disposal. ?️

Warranty & Service

The regular warranty period is 2 years and begins on the day of purchase. To benefit from an extended voluntary warranty period as stated on the gift box, registration on our website is required.

You can consult the full warranty terms as well as information on extending the warranty period and details of our services at www.bresser.de/warranty_terms ?

Manufacturer Information

Bresser GmbH
Gutenbergstraße 2
46414 Rhede, Germany
www.bresser.de ?

Bresser UK Ltd.
Suite 3G, Eden House,
Enterprise Way, Edenbridge,
Kent TN8 6HF, Great Britain

Follow us: [Facebook Icon] [Instagram Icon] [YouTube Icon] @BresserEurope

Errors and technical changes reserved.