DJI Mic 2 Transmitter User Manual
Introduction
Mic 2 is a dual channel wireless microphone system, including two transmitters and one receiver, which is able to record two sound sources simultaneously. The transmitter has a built-in omnidirectional microphone, supports the use of an external microphone, and can be clipped to clothing or any place close to a sound source. The charging case provided is able to charge the transmitters and receiver simultaneously and link them automatically.
Overview
DJI Mic 2 Transmitter
-
Recording Status LED
Indicates the record status of the transmitter.
Blinking Pattern Descriptions Solid red Recording Pulses red Mute Off Not recording -
Data Port (USB-C)
For copying audio or updating firmware after connecting to a computer. Can also be used for charging.
-
Record Button
Press once to start or stop recording.
-
3.5 mm TRS Input
For connecting external microphone. DO NOT connect a microphone with a power supply of 24 V or 48 V.
-
System Status Indicator
Blinking Pattern Descriptions Solid red Battery Level ≤20% Noise Reduction Solid yellow Noise reduction is enabled Connection Status to the Receiver Solid green Connected with the receiver Blinks green slowly Disconnected from the receiver Blinks green quickly Linking Bluetooth Connection Status Solid blue Connected with the Bluetooth device Blinks blue slowly Disconnected from the Bluetooth device Blinks blue quickly Linking Battery Level During Charging Blinks green slowly Battery level: 0~25% Blinks green twice Battery level: 26~50% Blinks green three times Battery level: 51~75% Blinks green four times Battery level: 76~100% Off Fully charged -
Linking Button
Press and hold for 2 seconds to start linking to the receiver. Once the receiver is attached to a mobile phone and the receiver and transmitter are linked, press once to take a photo or start or stop recording on the mobile phone (only supports mobile phones where the volume button can be used to take a photo or start or stop a video).
-
Power Button
Press and hold for 2 seconds to power on or off. Press twice to mute.
-
Charging Pad
Charging will begin after connecting the transmitter to the charging pad of the charging case and the transmitter will automatically link with the receiver in the charging case.
Specifications
| Name | DJI Mic 2 Transmitter |
|---|---|
| Model | DMT02 |
| Dimensions | 30×50×25 mm |
| Weight | 25.2 g |
| Wireless Mode | GFSK 1 Mbps and 2 Mbps |
| Operating Frequency | 2.4000-2.4835 GHz |
| Transmitter Power (EIRP) | < 20 dBm |
| Bluetooth Protocol | BR/EDR |
| Bluetooth Operating Frequency | 2.4000-2.4835 GHz |
| Bluetooth Transmitter Power (EIRP) | < 20 dBm |
| Battery Type | LiPo 1S |
| Battery Capacity | 360 mAh |
| Charging Temperature | 5° to 45° C (41° to 113° F) |
| Operating Temperature | -10° to 45° C (14° to 113° F) |
