TP-Link Tapo S210 Smart Light Switch

Quick Start Guide

Introduction

This guide provides instructions for installing and setting up your TP-Link Tapo Light Switch.

For detailed installation guides and FAQs, scan the QR code or visit: https://www.tp-link.com/support/faq/3360/

To watch installation videos, scan the QR code or visit: https://www.tp-link.com/support/download/tapo-s210/

Document Version: 7106509740 REV1.2.0. Images may differ from your actual product.

1. Power Up Your Switch

Slide the lock to the OPEN position ?. Then hold both sides of the faceplate and pull it away from the back.
Insert the batteries. Make sure the positive (+) and negative (-) terminals of the batteries face the correct direction. Use 2 x 1.5 V AAA/LR03 batteries.
Rated Voltage of the Switch: DC 2.4 V ~ 3.3 V

FAQs on Batteries

Q1: Do I need to cut off power when replacing batteries after installation?

A1: No need to cut off power. The switch has current protection. Your safety is secured.

Q2: When do I need to replace batteries?

A2: If the LED blinks 3 times when you press the switch, the batteries need replacing.

Q3: What types of batteries can I use?

A3: 1.5 V AAA/LR03 alkaline batteries are recommended.

Note: Too high voltage might damage the switch. Check the max output voltage with the manufacturers if you use other types of batteries.

2. Set Up Your Switch

Get the Tapo app from the App Store ? [App Store] or Google Play ▶️ [Google Play].
Tap the [Add Device] button in the app and select your model. Follow the instructions in the app to complete setup.

3. Wire Your Switch

Install your switch following the wiring diagram below. Make sure you turn off the circuit breaker first.

Wiring Diagram Description: The diagram shows connections for Hot/Line input and Lin/Lout output terminals. The hot/line wire is typically connected to the "C" or "L" terminal of a dumb switch. The Tapo switch also functions if Lin and Lout wires are not distinguished.

Important Notes:

If the dumb switch is connected with a Neutral wire, cover it with the provided wire nut.

Use Instructions

This switch can only be used with light fixtures and fans.

Connected fans should be below 50 W.
Do NOT connect the switch to heating devices such as bathroom heaters, water heaters, and boilers. [Not Compatible] ❌

Diagrams showing incompatible devices (Bathroom heater, Water heater, Boiler) are for demonstration purposes only.

Internal LED & Button

LED Indicator

Blinking red quickly: Enter pairing mode.
Solid red for 5s: Pairing is complete.
Blinking 3 times when pressing the switch: Low battery.

SYNC/RESET Button

Press and hold for 5s: Reset the switch and enter pairing mode.

For EU / UK Region

Operating Frequency / Nominal Operating Frequency / Max Output Power:

863~865MHz / 863.35MHz / 25mW (e.r.p)
863~865MHz / 864.35MHz / 25mW (e.r.p)
868~868.6MHz / 868.35MHz / 25mW (e.r.p)

Safety Precautions

Before installing, servicing, or removing the switch, read and follow all safety precautions:

Follow all national and local safety regulations and practices. If uncertain, consult a qualified electrician. ⚠️
CAUTION - Risk of Electric Shock: More than one disconnect switch may be required to de-energize the equipment before servicing. Ensure power is off at the circuit breaker before removing or installing any switch. Use a non-contact voltage tester to ensure power is off.
Do not install the Smart Switch with wet hands or when standing on wet or damp surfaces.
Keep the device away from water, fire, humidity, or hot environments.
Do not attempt to disassemble, repair, or modify the device. Contact support if service is needed.
Do not use the device where wireless devices are not allowed.

Declarations of Conformity

TP-Link declares that this device complies with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863. The original EU Declaration of Conformity may be found at: https://www.tapo.com/en/support/ce/

TP-Link declares that this device complies with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at: https://www.tapo.com/support/ukca/

For technical support, user guides, FAQs, warranty, and more, please visit: https://www.tapo.com/support/

	Tapo Smart Light Switch Quick Start Guide \| TP-Link Get started with your Tapo Smart Light Switch. This guide provides essential setup instructions, safety information, warranty details, and technical specifications from TP-Link.
	TP-Link Kasa Smart Wi-Fi Light Switch Quick Start Guide A comprehensive guide for installing and setting up the TP-Link Kasa Smart Wi-Fi Light Switch, including wiring instructions, Matter setup, button explanations, LED status, specifications, and safety precautions.
	Tapo Light Switch Quick Start Guide \| TP-Link Get started with your TP-Link Tapo Light Switch. This quick start guide provides step-by-step instructions for powering up, setting up via the Tapo app, and wiring your smart light switch.
	TP-Link Matter Devices: Setup Guide and FAQs A comprehensive guide to setting up TP-Link Matter-enabled devices, covering initial steps, connection procedures, and troubleshooting common issues. Learn how to integrate your devices with smart home ecosystems.
	TP-Link Tapo Hub Quick Start Guide - Setup and Usage Learn how to set up and use your TP-Link Tapo Hub with this quick start guide. Discover LED status indicators, button functions, accessory pairing, and safety information for your smart home device.
	Tapo Smart Hub Quick Start Guide \| TP-Link Quick start guide for the TP-Link Tapo Smart Hub, providing setup instructions, safety information, declarations of conformity, and technical specifications. Available in multiple languages.
	TP-Link Kasa Smart Wi-Fi Light Switch HS220-2 Quick Start Guide Step-by-step guide to wiring, installing, and setting up the TP-Link Kasa Smart Wi-Fi Light Switch, Dimmer, Two-Gang (HS220-2) for smart home automation.
	TP-Link Tapo Smart Floodlight Camera Quick Start Guide A quick start guide for the TP-Link Tapo Smart Floodlight Camera, covering mounting options, wiring instructions, app setup, and safety information.